devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Krzysztof Kozlowski <krzk@kernel.org>
To: Alice Guo <alice.guo@nxp.com>
Cc: robh+dt@kernel.org, shawnguo@kernel.org, s.hauer@pengutronix.de,
	linux-imx@nxp.com, peng.fan@nxp.com, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v2 4/4] soc: imx8m: change to use platform driver
Date: Thu, 5 Nov 2020 10:06:28 +0100	[thread overview]
Message-ID: <20201105090628.GA75895@kozik-lap> (raw)
In-Reply-To: <20201105072629.24175-4-alice.guo@nxp.com>

On Thu, Nov 05, 2020 at 03:26:29PM +0800, Alice Guo wrote:
> Directly reading ocotp register depends on that bootloader enables ocotp
> clk, which is not always effective, so change to use nvmem API. Using
> nvmem API requires to support driver defer probe and thus change
> soc-imx8m.c to use platform driver.
> 
> The other reason is that directly reading ocotp register causes kexec
> kernel hang because the 1st kernel running will disable unused clks
> after kernel boots up, and then ocotp clk will be disabled even if
> bootloader enables it. When kexec kernel, ocotp clk needs to be enabled
> before reading ocotp registers, and nvmem API with platform driver
> supported can accomplish this.
> 
> Signed-off-by: Alice Guo <alice.guo@nxp.com>
> ---
>  drivers/soc/imx/soc-imx8m.c | 75 +++++++++++++++++++++----------------
>  1 file changed, 42 insertions(+), 33 deletions(-)
> 
> diff --git a/drivers/soc/imx/soc-imx8m.c b/drivers/soc/imx/soc-imx8m.c
> index cc57a384d74d..83f3297509be 100644
> --- a/drivers/soc/imx/soc-imx8m.c
> +++ b/drivers/soc/imx/soc-imx8m.c
> @@ -5,6 +5,8 @@
> 
>  #include <linux/init.h>
>  #include <linux/io.h>
> +#include <linux/module.h>
> +#include <linux/nvmem-consumer.h>
>  #include <linux/of_address.h>
>  #include <linux/slab.h>
>  #include <linux/sys_soc.h>
> @@ -29,7 +31,7 @@
> 
>  struct imx8_soc_data {
>  	char *name;
> -	u32 (*soc_revision)(void);
> +	u32 (*soc_revision)(struct device *dev);
>  };
> 
>  static u64 soc_uid;
> @@ -50,12 +52,15 @@ static u32 imx8mq_soc_revision_from_atf(void)
>  static inline u32 imx8mq_soc_revision_from_atf(void) { return 0; };
>  #endif
> 
> -static u32 __init imx8mq_soc_revision(void)
> +static u32 __init imx8mm_soc_uid(struct device *dev);
> +
> +static u32 __init imx8mq_soc_revision(struct device *dev)
>  {
>  	struct device_node *np;
>  	void __iomem *ocotp_base;
>  	u32 magic;
>  	u32 rev;
> +	int ret = 0;
> 
>  	np = of_find_compatible_node(NULL, NULL, "fsl,imx8mq-ocotp");
>  	if (!np)
> @@ -75,9 +80,9 @@ static u32 __init imx8mq_soc_revision(void)
>  			rev = REV_B1;
>  	}
> 
> -	soc_uid = readl_relaxed(ocotp_base + OCOTP_UID_HIGH);
> -	soc_uid <<= 32;
> -	soc_uid |= readl_relaxed(ocotp_base + OCOTP_UID_LOW);
> +	ret = imx8mm_soc_uid(dev);
> +	if (ret)
> +		return ret;
> 
>  	iounmap(ocotp_base);
>  	of_node_put(np);
> @@ -85,33 +90,20 @@ static u32 __init imx8mq_soc_revision(void)
>  	return rev;
>  }
> 
> -static void __init imx8mm_soc_uid(void)
> +static u32 __init imx8mm_soc_uid(struct device *dev)
>  {
> -	void __iomem *ocotp_base;
> -	struct device_node *np;
> -	u32 offset = of_machine_is_compatible("fsl,imx8mp") ?
> -		     IMX8MP_OCOTP_UID_OFFSET : 0;
> -
> -	np = of_find_compatible_node(NULL, NULL, "fsl,imx8mm-ocotp");
> -	if (!np)
> -		return;
> -
> -	ocotp_base = of_iomap(np, 0);
> -	WARN_ON(!ocotp_base);
> -
> -	soc_uid = readl_relaxed(ocotp_base + OCOTP_UID_HIGH + offset);
> -	soc_uid <<= 32;
> -	soc_uid |= readl_relaxed(ocotp_base + OCOTP_UID_LOW + offset);
> +	int ret = 0;
> 
> -	iounmap(ocotp_base);
> -	of_node_put(np);
> +	ret = nvmem_cell_read_u64(dev, "soc_unique_id", &soc_uid);
> +	return ret;
>  }
> 
> -static u32 __init imx8mm_soc_revision(void)
> +static u32 __init imx8mm_soc_revision(struct device *dev)
>  {
>  	struct device_node *np;
>  	void __iomem *anatop_base;
>  	u32 rev;
> +	int ret;
> 
>  	np = of_find_compatible_node(NULL, NULL, "fsl,imx8mm-anatop");
>  	if (!np)
> @@ -125,7 +117,9 @@ static u32 __init imx8mm_soc_revision(void)
>  	iounmap(anatop_base);
>  	of_node_put(np);
> 
> -	imx8mm_soc_uid();
> +	ret = imx8mm_soc_uid(dev);
> +	if (ret)
> +		return ret;

I think this breaks old existing DTBs. If applied on separate branch
than DTS patches, it will cause bisect regressions. Regardless of it,
all out-of-tree (customer DTBs) will start failing here as well.

Best regards,
Krzysztof


> 
>  	return rev;
>  }
> @@ -151,19 +145,20 @@ static const struct imx8_soc_data imx8mp_soc_data = {
>  };
> 
>  static __maybe_unused const struct of_device_id imx8_soc_match[] = {
> -	{ .compatible = "fsl,imx8mq", .data = &imx8mq_soc_data, },
> -	{ .compatible = "fsl,imx8mm", .data = &imx8mm_soc_data, },
> -	{ .compatible = "fsl,imx8mn", .data = &imx8mn_soc_data, },
> -	{ .compatible = "fsl,imx8mp", .data = &imx8mp_soc_data, },
> +	{ .compatible = "fsl,imx8mq-soc", .data = &imx8mq_soc_data, },
> +	{ .compatible = "fsl,imx8mm-soc", .data = &imx8mm_soc_data, },
> +	{ .compatible = "fsl,imx8mn-soc", .data = &imx8mn_soc_data, },
> +	{ .compatible = "fsl,imx8mp-soc", .data = &imx8mp_soc_data, },
>  	{ }
>  };
> +MODULE_DEVICE_TABLE(of, imx8_soc_match);
> 
>  #define imx8_revision(soc_rev) \
>  	soc_rev ? \
>  	kasprintf(GFP_KERNEL, "%d.%d", (soc_rev >> 4) & 0xf,  soc_rev & 0xf) : \
>  	"unknown"
> 
> -static int __init imx8_soc_init(void)
> +static int imx8_soc_init_probe(struct platform_device *pdev)
>  {
>  	struct soc_device_attribute *soc_dev_attr;
>  	struct soc_device *soc_dev;
> @@ -182,7 +177,7 @@ static int __init imx8_soc_init(void)
>  	if (ret)
>  		goto free_soc;
> 
> -	id = of_match_node(imx8_soc_match, of_root);
> +	id = of_match_node(imx8_soc_match, pdev->dev.of_node);
>  	if (!id) {
>  		ret = -ENODEV;
>  		goto free_soc;
> @@ -192,7 +187,11 @@ static int __init imx8_soc_init(void)
>  	if (data) {
>  		soc_dev_attr->soc_id = data->name;
>  		if (data->soc_revision)
> -			soc_rev = data->soc_revision();
> +			soc_rev = data->soc_revision(&pdev->dev);
> +
> +		ret = soc_rev;
> +		if (ret < 0)
> +			goto free_soc;
>  	}
> 
>  	soc_dev_attr->revision = imx8_revision(soc_rev);
> @@ -230,4 +229,14 @@ static int __init imx8_soc_init(void)
>  	kfree(soc_dev_attr);
>  	return ret;
>  }
> -device_initcall(imx8_soc_init);
> +
> +static struct platform_driver imx8_soc_init_driver = {
> +	.probe = imx8_soc_init_probe,
> +	.driver = {
> +		.name = "imx8_soc_init",
> +		.of_match_table = of_match_ptr(imx8_soc_match),
> +	},
> +};
> +
> +module_platform_driver(imx8_soc_init_driver);
> +MODULE_LICENSE("GPL v2");
> --
> 2.17.1
> 

  reply	other threads:[~2020-11-05  9:06 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-11-05  7:26 [PATCH v2 1/4] dt-bindings: soc: imx8m: add DT Binding doc for soc unique ID Alice Guo
2020-11-05  7:26 ` [PATCH v2 2/4] arm64: dts: imx8m: add compatible string to .dtsi file Alice Guo
2020-11-05  7:26 ` [PATCH v2 3/4] arm64: dts: imx8m: add nvmem-cell related stuff Alice Guo
2020-11-05  7:26 ` [PATCH v2 4/4] soc: imx8m: change to use platform driver Alice Guo
2020-11-05  9:06   ` Krzysztof Kozlowski [this message]
2020-11-06 10:35     ` [EXT] " Alice Guo
2020-11-06 20:07       ` Krzysztof Kozlowski
2020-11-05  8:25 ` [PATCH v2 1/4] dt-bindings: soc: imx8m: add DT Binding doc for soc unique ID Krzysztof Kozlowski
2020-11-05 12:19   ` [EXT] " Alice Guo
2020-11-05 12:24     ` Krzysztof Kozlowski
2020-11-09 19:10 ` Rob Herring
2020-11-10  5:25   ` Peng Fan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201105090628.GA75895@kozik-lap \
    --to=krzk@kernel.org \
    --cc=alice.guo@nxp.com \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=peng.fan@nxp.com \
    --cc=robh+dt@kernel.org \
    --cc=s.hauer@pengutronix.de \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).