devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Yong Wu <yong.wu@mediatek.com>
To: Joerg Roedel <joro@8bytes.org>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	Rob Herring <robh+dt@kernel.org>, Will Deacon <will@kernel.org>,
	Robin Murphy <robin.murphy@arm.com>
Cc: Krzysztof Kozlowski <krzk@kernel.org>,
	Evan Green <evgreen@chromium.org>, Tomasz Figa <tfiga@google.com>,
	<linux-mediatek@lists.infradead.org>,
	<srv_heupstream@mediatek.com>, <devicetree@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<iommu@lists.linux-foundation.org>, <yong.wu@mediatek.com>,
	<youlin.pei@mediatek.com>,
	Nicolas Boichat <drinkcat@chromium.org>, <anan.sun@mediatek.com>,
	<chao.hao@mediatek.com>, Greg Kroah-Hartman <gregkh@google.com>,
	<kernel-team@android.com>
Subject: [PATCH v4 20/24] iommu/mediatek: Support report iova 34bit translation fault in ISR
Date: Wed, 11 Nov 2020 20:38:34 +0800	[thread overview]
Message-ID: <20201111123838.15682-21-yong.wu@mediatek.com> (raw)
In-Reply-To: <20201111123838.15682-1-yong.wu@mediatek.com>

If the iova is over 32bit, the fault status register bit is a little
different. Add a flag for the special register bits.

Signed-off-by: Yong Wu <yong.wu@mediatek.com>
---
 drivers/iommu/mtk_iommu.c | 17 +++++++++++++++--
 1 file changed, 15 insertions(+), 2 deletions(-)

diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index 11af0780e4dd..fdf08e2d9ed5 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -89,6 +89,9 @@
 #define F_REG_MMU1_FAULT_MASK			GENMASK(13, 7)
 
 #define REG_MMU0_FAULT_VA			0x13c
+#define F_MMU_INVAL_VA_31_12_MASK		GENMASK(31, 12)
+#define F_MMU_INVAL_VA_34_32_MASK		GENMASK(11, 9)
+#define F_MMU_INVAL_PA_34_32_MASK		GENMASK(8, 6)
 #define F_MMU_FAULT_VA_WRITE_BIT		BIT(1)
 #define F_MMU_FAULT_VA_LAYER_BIT		BIT(0)
 
@@ -113,6 +116,7 @@
 #define HAS_SUB_COMM			BIT(5)
 #define WR_THROT_EN			BIT(6)
 #define HAS_LEGACY_IVRP_PADDR		BIT(7)
+#define IOVA_34_EN			BIT(8)
 
 #define MTK_IOMMU_HAS_FLAG(pdata, _x) \
 		((((pdata)->flags) & (_x)) == (_x))
@@ -263,8 +267,9 @@ static irqreturn_t mtk_iommu_isr(int irq, void *dev_id)
 {
 	struct mtk_iommu_data *data = dev_id;
 	struct mtk_iommu_domain *dom = data->m4u_dom;
-	u32 int_state, regval, fault_iova, fault_pa;
 	unsigned int fault_larb, fault_port, sub_comm = 0;
+	u32 int_state, regval, va34_32, pa34_32;
+	u64 fault_iova, fault_pa;
 	bool layer, write;
 
 	/* Read error info from registers */
@@ -280,6 +285,14 @@ static irqreturn_t mtk_iommu_isr(int irq, void *dev_id)
 	}
 	layer = fault_iova & F_MMU_FAULT_VA_LAYER_BIT;
 	write = fault_iova & F_MMU_FAULT_VA_WRITE_BIT;
+	if (MTK_IOMMU_HAS_FLAG(data->plat_data, IOVA_34_EN)) {
+		va34_32 = FIELD_GET(F_MMU_INVAL_VA_34_32_MASK, fault_iova);
+		pa34_32 = FIELD_GET(F_MMU_INVAL_PA_34_32_MASK, fault_iova);
+		fault_iova = fault_iova & F_MMU_INVAL_VA_31_12_MASK;
+		fault_iova |=  (u64)va34_32 << 32;
+		fault_pa |= (u64)pa34_32 << 32;
+	}
+
 	fault_port = F_MMU_INT_ID_PORT_ID(regval);
 	if (MTK_IOMMU_HAS_FLAG(data->plat_data, HAS_SUB_COMM)) {
 		fault_larb = F_MMU_INT_ID_COMM_ID(regval);
@@ -293,7 +306,7 @@ static irqreturn_t mtk_iommu_isr(int irq, void *dev_id)
 			       write ? IOMMU_FAULT_WRITE : IOMMU_FAULT_READ)) {
 		dev_err_ratelimited(
 			data->dev,
-			"fault type=0x%x iova=0x%x pa=0x%x larb=%d port=%d layer=%d %s\n",
+			"fault type=0x%x iova=0x%llx pa=0x%llx larb=%d port=%d layer=%d %s\n",
 			int_state, fault_iova, fault_pa, fault_larb, fault_port,
 			layer, write ? "write" : "read");
 	}
-- 
2.18.0


  parent reply	other threads:[~2020-11-11 12:41 UTC|newest]

Thread overview: 48+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-11-11 12:38 [PATCH v4 00/24] MT8192 IOMMU support Yong Wu
2020-11-11 12:38 ` [PATCH v4 01/24] dt-bindings: iommu: mediatek: Convert IOMMU to DT schema Yong Wu
2020-11-16 17:43   ` Rob Herring
2020-11-11 12:38 ` [PATCH v4 02/24] dt-bindings: memory: mediatek: Add a common larb-port header file Yong Wu
2020-11-11 21:30   ` Krzysztof Kozlowski
2020-11-11 12:38 ` [PATCH v4 03/24] dt-bindings: memory: mediatek: Extend LARB_NR_MAX to 32 Yong Wu
2020-11-11 21:30   ` Krzysztof Kozlowski
2020-11-11 12:38 ` [PATCH v4 04/24] dt-bindings: memory: mediatek: Add domain definition Yong Wu
2020-11-11 21:30   ` Krzysztof Kozlowski
2020-11-16 17:44   ` Rob Herring
2020-11-11 12:38 ` [PATCH v4 05/24] dt-bindings: mediatek: Add binding for mt8192 IOMMU Yong Wu
2020-11-11 21:33   ` Krzysztof Kozlowski
2020-11-12  2:41     ` Yong Wu
2020-11-11 12:38 ` [PATCH v4 06/24] iommu/mediatek: Use the common mtk-smi-larb-port.h Yong Wu
2020-11-11 21:33   ` Krzysztof Kozlowski
2020-11-11 12:38 ` [PATCH v4 07/24] iommu/io-pgtable-arm-v7s: Use ias to check the valid iova in unmap Yong Wu
2020-11-26 15:41   ` Robin Murphy
2020-11-11 12:38 ` [PATCH v4 08/24] iommu/io-pgtable-arm-v7s: Extend PA34 for MediaTek Yong Wu
2020-11-26 15:49   ` Robin Murphy
2020-11-11 12:38 ` [PATCH v4 09/24] iommu/io-pgtable-arm-v7s: Clear LVL_SHIFT/BITS macro instead of the formula Yong Wu
2020-11-26 16:03   ` Robin Murphy
2020-11-27  6:21     ` Yong Wu
2020-11-11 12:38 ` [PATCH v4 10/24] iommu/io-pgtable-arm-v7s: Add cfg as a param in some macros Yong Wu
2020-11-26 16:09   ` Robin Murphy
2020-11-11 12:38 ` [PATCH v4 11/24] iommu/io-pgtable-arm-v7s: Quad lvl1 pgtable for MediaTek Yong Wu
2020-11-26 16:15   ` Robin Murphy
2020-11-11 12:38 ` [PATCH v4 12/24] iommu/mediatek: Move hw_init into attach_device Yong Wu
2020-11-26 16:43   ` Robin Murphy
2020-11-27  6:23     ` Yong Wu
2020-11-11 12:38 ` [PATCH v4 13/24] iommu/mediatek: Add device link for smi-common and m4u Yong Wu
2020-11-12  1:10   ` Nicolas Boichat
2020-11-12  2:42     ` Yong Wu
2020-11-11 12:38 ` [PATCH v4 14/24] iommu/mediatek: Add pm runtime callback Yong Wu
2020-11-11 12:38 ` [PATCH v4 15/24] iommu/mediatek: Add power-domain operation Yong Wu
2020-11-11 12:38 ` [PATCH v4 16/24] iommu/mediatek: Add iova reserved function Yong Wu
2020-11-11 12:38 ` [PATCH v4 17/24] iommu/mediatek: Add single domain Yong Wu
2020-11-26 17:11   ` Robin Murphy
2020-11-27  6:21     ` Yong Wu
2020-11-11 12:38 ` [PATCH v4 18/24] iommu/mediatek: Support master use iova over 32bit Yong Wu
2020-11-11 21:34   ` Krzysztof Kozlowski
2020-11-11 12:38 ` [PATCH v4 19/24] iommu/mediatek: Support up to 34bit iova in tlb flush Yong Wu
2020-11-11 12:38 ` Yong Wu [this message]
2020-11-11 12:38 ` [PATCH v4 21/24] iommu/mediatek: Add support for multi domain Yong Wu
2020-11-11 12:38 ` [PATCH v4 22/24] iommu/mediatek: Adjust the structure Yong Wu
2020-11-11 12:38 ` [PATCH v4 23/24] iommu/mediatek: Add mt8192 support Yong Wu
2020-11-11 12:38 ` [PATCH v4 24/24] MAINTAINERS: Add entry for MediaTek IOMMU Yong Wu
2020-11-11 16:52   ` Chun-Kuang Hu
2020-11-25 12:23 ` [PATCH v4 00/24] MT8192 IOMMU support Will Deacon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201111123838.15682-21-yong.wu@mediatek.com \
    --to=yong.wu@mediatek.com \
    --cc=anan.sun@mediatek.com \
    --cc=chao.hao@mediatek.com \
    --cc=devicetree@vger.kernel.org \
    --cc=drinkcat@chromium.org \
    --cc=evgreen@chromium.org \
    --cc=gregkh@google.com \
    --cc=iommu@lists.linux-foundation.org \
    --cc=joro@8bytes.org \
    --cc=kernel-team@android.com \
    --cc=krzk@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=matthias.bgg@gmail.com \
    --cc=robh+dt@kernel.org \
    --cc=robin.murphy@arm.com \
    --cc=srv_heupstream@mediatek.com \
    --cc=tfiga@google.com \
    --cc=will@kernel.org \
    --cc=youlin.pei@mediatek.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).