From: rentao.bupt@gmail.com
To: Rob Herring <robh+dt@kernel.org>, Joel Stanley <joel@jms.id.au>,
Andrew Jeffery <andrew@aj.id.au>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-aspeed@lists.ozlabs.org, linux-kernel@vger.kernel.org,
openbmc@lists.ozlabs.org, taoren@fb.com
Cc: Tao Ren <rentao.bupt@gmail.com>
Subject: [PATCH 3/4] ARM: dts: aspeed: wedge100: Use common dtsi
Date: Wed, 11 Nov 2020 15:23:29 -0800 [thread overview]
Message-ID: <20201111232330.30843-4-rentao.bupt@gmail.com> (raw)
In-Reply-To: <20201111232330.30843-1-rentao.bupt@gmail.com>
From: Tao Ren <rentao.bupt@gmail.com>
Simplify the Wedge100 device tree by using the common dtsi.
In addition this enables the second firmware flash, and turns on the
"i2c-mux-idle-disconnect" flag for I2C switch 7-0070.
Signed-off-by: Tao Ren <rentao.bupt@gmail.com>
---
.../boot/dts/aspeed-bmc-facebook-wedge100.dts | 120 +++---------------
1 file changed, 15 insertions(+), 105 deletions(-)
diff --git a/arch/arm/boot/dts/aspeed-bmc-facebook-wedge100.dts b/arch/arm/boot/dts/aspeed-bmc-facebook-wedge100.dts
index 322587b7b67d..39c6be91d53f 100644
--- a/arch/arm/boot/dts/aspeed-bmc-facebook-wedge100.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-facebook-wedge100.dts
@@ -2,36 +2,16 @@
// Copyright (c) 2018 Facebook Inc.
/dts-v1/;
-#include "aspeed-g4.dtsi"
+#include "ast2400-facebook-netbmc-common.dtsi"
/ {
model = "Facebook Wedge 100 BMC";
compatible = "facebook,wedge100-bmc", "aspeed,ast2400";
- aliases {
- /*
- * Override the default uart aliases to avoid breaking
- * the legacy applications.
- */
- serial0 = &uart5;
- serial1 = &uart1;
- serial2 = &uart3;
- serial3 = &uart4;
- };
-
chosen {
stdout-path = &uart3;
bootargs = "console=ttyS2,9600n8 root=/dev/ram rw";
};
-
- memory@40000000 {
- reg = <0x40000000 0x20000000>;
- };
-};
-
-&wdt1 {
- status = "okay";
- aspeed,reset-type = "system";
};
&wdt2 {
@@ -40,108 +20,38 @@
};
&fmc {
- status = "okay";
- flash@0 {
+ flash@1 {
status = "okay";
m25p,fast-read;
- label = "fmc0";
-#include "facebook-bmc-flash-layout.dtsi"
+ label = "spi0.1";
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ flash1@0 {
+ reg = <0x0 0x2000000>;
+ label = "flash1";
+ };
+ };
};
};
-&uart1 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_txd1_default
- &pinctrl_rxd1_default>;
-};
-
-&uart3 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_txd3_default
- &pinctrl_rxd3_default>;
-};
-
-&uart4 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_txd4_default
- &pinctrl_rxd4_default>;
-};
-
-&uart5 {
- status = "okay";
-};
-
-&mac1 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
-};
-
-&i2c0 {
- status = "okay";
-};
-
-&i2c1 {
- status = "okay";
-};
-
-&i2c2 {
- status = "okay";
-};
-
-&i2c3 {
- status = "okay";
-};
-
-&i2c4 {
- status = "okay";
-};
-
-&i2c5 {
- status = "okay";
-};
-
-&i2c6 {
- status = "okay";
-};
-
&i2c7 {
- status = "okay";
-
i2c-switch@70 {
compatible = "nxp,pca9548";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x70>;
+ i2c-mux-idle-disconnect;
};
};
-&i2c8 {
- status = "okay";
-};
-
&i2c9 {
status = "okay";
};
-&i2c10 {
- status = "okay";
-};
-
-&i2c11 {
- status = "okay";
-};
-
-&i2c12 {
- status = "okay";
-};
-
-&i2c13 {
- status = "okay";
-};
&vhub {
status = "okay";
--
2.17.1
next prev parent reply other threads:[~2020-11-12 1:31 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-11-11 23:23 [PATCH 0/4] ARM: dts: aspeed: Add Facebook Galaxy100 BMC rentao.bupt
2020-11-11 23:23 ` [PATCH 1/4] ARM: dts: aspeed: Common dtsi for Facebook AST2400 Network BMCs rentao.bupt
2020-11-11 23:23 ` [PATCH 2/4] ARM: dts: aspeed: wedge40: Use common dtsi rentao.bupt
2020-11-11 23:23 ` rentao.bupt [this message]
2020-11-11 23:23 ` [PATCH 4/4] ARM: dts: aspeed: Add Facebook Galaxy100 (AST2400) BMC rentao.bupt
2020-11-11 23:34 ` [PATCH 0/4] ARM: dts: aspeed: Add Facebook Galaxy100 BMC Joel Stanley
2020-11-12 0:41 ` Tao Ren
2020-11-12 3:18 ` Patrick Williams
2020-11-12 5:25 ` Tao Ren
2020-11-12 5:49 ` Joel Stanley
2020-11-13 0:34 ` Tao Ren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201111232330.30843-4-rentao.bupt@gmail.com \
--to=rentao.bupt@gmail.com \
--cc=andrew@aj.id.au \
--cc=devicetree@vger.kernel.org \
--cc=joel@jms.id.au \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-aspeed@lists.ozlabs.org \
--cc=linux-kernel@vger.kernel.org \
--cc=openbmc@lists.ozlabs.org \
--cc=robh+dt@kernel.org \
--cc=taoren@fb.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).