From: Florian Fainelli <f.fainelli@gmail.com>
To: linux-arm-kernel@lists.infradead.org
Cc: "Florian Fainelli" <f.fainelli@gmail.com>,
"Andrew Lunn" <andrew@lunn.ch>,
"Vivien Didelot" <vivien.didelot@gmail.com>,
"Vladimir Oltean" <olteanv@gmail.com>,
"David S. Miller" <davem@davemloft.net>,
"Jakub Kicinski" <kuba@kernel.org>,
"Rob Herring" <robh+dt@kernel.org>, "Ray Jui" <rjui@broadcom.com>,
"Scott Branden" <sbranden@broadcom.com>,
bcm-kernel-feedback-list@broadcom.com (maintainer:BROADCOM IPROC
ARM ARCHITECTURE), "Hauke Mehrtens" <hauke@hauke-m.de>,
"Rafał Miłecki" <zajec5@gmail.com>,
netdev@vger.kernel.org (open list:NETWORKING DRIVERS),
devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND
FLATTENED DEVICE TREE BINDINGS),
linux-kernel@vger.kernel.org (open list),
"Kurt Kanzenbach" <kurt@kmk-computers.de>
Subject: [PATCH v2 08/10] ARM: dts: NSP: Add a SRAB compatible string for each board
Date: Wed, 11 Nov 2020 20:50:18 -0800 [thread overview]
Message-ID: <20201112045020.9766-9-f.fainelli@gmail.com> (raw)
In-Reply-To: <20201112045020.9766-1-f.fainelli@gmail.com>
Provide a valid compatible string for the Ethernet switch node based on
the board including the switch. This allows us to have sane defaults and
silences the following warnings:
arch/arm/boot/dts/bcm958522er.dt.yaml:
ethernet-switch@36000: compatible: 'oneOf' conditional failed,
one
must be fixed:
['brcm,bcm5301x-srab'] is too short
'brcm,bcm5325' was expected
'brcm,bcm53115' was expected
'brcm,bcm53125' was expected
'brcm,bcm53128' was expected
'brcm,bcm5365' was expected
'brcm,bcm5395' was expected
'brcm,bcm5389' was expected
'brcm,bcm5397' was expected
'brcm,bcm5398' was expected
'brcm,bcm11360-srab' was expected
'brcm,bcm5301x-srab' is not one of ['brcm,bcm53010-srab',
'brcm,bcm53011-srab', 'brcm,bcm53012-srab', 'brcm,bcm53018-srab',
'brcm,bcm53019-srab']
'brcm,bcm5301x-srab' is not one of ['brcm,bcm11404-srab',
'brcm,bcm11407-srab', 'brcm,bcm11409-srab', 'brcm,bcm58310-srab',
'brcm,bcm58311-srab', 'brcm,bcm58313-srab']
'brcm,bcm5301x-srab' is not one of ['brcm,bcm58522-srab',
'brcm,bcm58523-srab', 'brcm,bcm58525-srab', 'brcm,bcm58622-srab',
'brcm,bcm58623-srab', 'brcm,bcm58625-srab', 'brcm,bcm88312-srab']
'brcm,bcm5301x-srab' is not one of ['brcm,bcm3384-switch',
'brcm,bcm6328-switch', 'brcm,bcm6368-switch']
From schema:
Documentation/devicetree/bindings/net/dsa/b53.yaml
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
arch/arm/boot/dts/bcm958522er.dts | 4 ++++
arch/arm/boot/dts/bcm958525er.dts | 4 ++++
arch/arm/boot/dts/bcm958525xmc.dts | 4 ++++
3 files changed, 12 insertions(+)
diff --git a/arch/arm/boot/dts/bcm958522er.dts b/arch/arm/boot/dts/bcm958522er.dts
index 7be4c4e628e0..5443fc079e6e 100644
--- a/arch/arm/boot/dts/bcm958522er.dts
+++ b/arch/arm/boot/dts/bcm958522er.dts
@@ -178,3 +178,7 @@ &usb3_phy {
&xhci {
status = "okay";
};
+
+&srab {
+ compatible = "brcm,bcm58522-srab", "brcm,nsp-srab";
+};
diff --git a/arch/arm/boot/dts/bcm958525er.dts b/arch/arm/boot/dts/bcm958525er.dts
index e58ed7e95346..e1e3c26cef19 100644
--- a/arch/arm/boot/dts/bcm958525er.dts
+++ b/arch/arm/boot/dts/bcm958525er.dts
@@ -190,3 +190,7 @@ &usb3_phy {
&xhci {
status = "okay";
};
+
+&srab {
+ compatible = "brcm,bcm58525-srab", "brcm,nsp-srab";
+};
diff --git a/arch/arm/boot/dts/bcm958525xmc.dts b/arch/arm/boot/dts/bcm958525xmc.dts
index 21f922dc6019..f161ba2e7e5e 100644
--- a/arch/arm/boot/dts/bcm958525xmc.dts
+++ b/arch/arm/boot/dts/bcm958525xmc.dts
@@ -210,3 +210,7 @@ &usb3_phy {
&xhci {
status = "okay";
};
+
+&srab {
+ compatible = "brcm,bcm58525-srab", "brcm,nsp-srab";
+};
--
2.25.1
next prev parent reply other threads:[~2020-11-12 5:44 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-11-12 4:50 [PATCH v2 00/10] Broadcom b53 YAML bindings Florian Fainelli
2020-11-12 4:50 ` [PATCH v2 01/10] dt-bindings: net: dsa: Extend switch nodes pattern Florian Fainelli
2020-11-12 4:50 ` [PATCH v2 02/10] dt-bindings: net: dsa: Document sfp and managed properties Florian Fainelli
2020-11-12 4:50 ` [PATCH v2 03/10] ARM: dts: BCM5301X: Update Ethernet switch node name Florian Fainelli
2020-11-12 4:50 ` [PATCH v2 04/10] ARM: dts: BCM5301X: Add a default compatible for switch node Florian Fainelli
2020-11-12 5:25 ` Rafał Miłecki
2020-11-12 4:50 ` [PATCH v2 05/10] ARM: dts: BCM5301X: Provide defaults ports container node Florian Fainelli
2020-11-12 5:26 ` Rafał Miłecki
2020-11-12 4:50 ` [PATCH v2 06/10] ARM: dts: NSP: Update ethernet switch node name Florian Fainelli
2020-11-12 4:50 ` [PATCH v2 07/10] ARM: dts: NSP: Fix Ethernet switch SGMII register name Florian Fainelli
2020-11-12 4:50 ` Florian Fainelli [this message]
2020-11-14 1:08 ` [PATCH v2 08/10] ARM: dts: NSP: Add a SRAB compatible string for each board Vladimir Oltean
2020-11-12 4:50 ` [PATCH v2 09/10] ARM: dts: NSP: Provide defaults ports container node Florian Fainelli
2020-11-14 1:10 ` Vladimir Oltean
2020-11-12 4:50 ` [PATCH v2 10/10] dt-bindings: net: dsa: b53: Add YAML bindings Florian Fainelli
2020-11-21 2:56 ` [PATCH v2 00/10] Broadcom b53 " Florian Fainelli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201112045020.9766-9-f.fainelli@gmail.com \
--to=f.fainelli@gmail.com \
--cc=andrew@lunn.ch \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=hauke@hauke-m.de \
--cc=kuba@kernel.org \
--cc=kurt@kmk-computers.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
--cc=olteanv@gmail.com \
--cc=rjui@broadcom.com \
--cc=robh+dt@kernel.org \
--cc=sbranden@broadcom.com \
--cc=vivien.didelot@gmail.com \
--cc=zajec5@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).