[PATCH 1/3 v2] iio: accel: bmc150-accel: Add DT bindings

[PATCH 1/3 v2] iio: accel: bmc150-accel: Add DT bindings

[Linus Walleij]

These accelerometers have bindings used in the kernel and
several device trees but no proper bindings documentation.
Add it.

Also add a compatible for the BMA222 that I am right now
adding support for in the driver.

Cc: devicetree@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
ChangeLog v1->v2:
- Rename to simply bosch,bma255.yaml after one of the
  common accelerometers.
- Specify that the SPI uses a 4-wire interface.
- Specify maximum SPI clock frequency to 10MHz. (Checked
  all the datasheets.)
---
 .../bindings/iio/accel/bosch,bma255.yaml      | 73 +++++++++++++++++++
 1 file changed, 73 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/accel/bosch,bma255.yaml

diff --git a/Documentation/devicetree/bindings/iio/accel/bosch,bma255.yaml b/Documentation/devicetree/bindings/iio/accel/bosch,bma255.yaml
new file mode 100644
index 000000000000..5f48bdcf382c
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/accel/bosch,bma255.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/accel/bosch,bma255.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bosch BMA255 and Similar Accelerometers
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description:
+  3 axis accelerometers with varying range and I2C or SPI
+  4-wire interface.
+
+properties:
+  compatible:
+    enum:
+      - bosch,bmc150
+      - bosch,bmi055
+      - bosch,bma255
+      - bosch,bma250e
+      - bosch,bma222
+      - bosch,bma222e
+      - bosch,bma280
+
+  reg:
+    maxItems: 1
+
+  vdd-supply: true
+  vddio-supply: true
+
+  interrupts:
+    maxItems: 1
+
+  mount-matrix:
+    description: an optional 3x3 mounting rotation matrix.
+
+  spi-max-frequency:
+    maximum: 10000000
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+        #include <dt-bindings/interrupt-controller/irq.h>
+        #address-cells = <1>;
+        #size-cells = <0>;
+        accelerometer@8 {
+            compatible = "bosch,bma222";
+            reg = <0x08>;
+            vddio-supply = <&vddio>;
+            vdd-supply = <&vdd>;
+            interrupts = <57 IRQ_TYPE_EDGE_FALLING>;
+        };
+    };
+  - |
+    # include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        accel@0 {
+            compatible = "bosch,bma222";
+            reg = <0>;
+            spi-max-frequency = <10000000>;
+        };
+    };
+...
-- 
2.26.2

Re: [PATCH 1/3 v2] iio: accel: bmc150-accel: Add DT bindings

[Jonathan Cameron]

On Thu, 12 Nov 2020 22:54:49 +0100
Linus Walleij <linus.walleij@linaro.org> wrote:

> These accelerometers have bindings used in the kernel and
> several device trees but no proper bindings documentation.
> Add it.
> 
> Also add a compatible for the BMA222 that I am right now
> adding support for in the driver.
> 
> Cc: devicetree@vger.kernel.org
> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

One little note inline on consistency.

Jonathan

> ---
> ChangeLog v1->v2:
> - Rename to simply bosch,bma255.yaml after one of the
>   common accelerometers.
> - Specify that the SPI uses a 4-wire interface.
> - Specify maximum SPI clock frequency to 10MHz. (Checked
>   all the datasheets.)
> ---
>  .../bindings/iio/accel/bosch,bma255.yaml      | 73 +++++++++++++++++++
>  1 file changed, 73 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/accel/bosch,bma255.yaml
> 
> diff --git a/Documentation/devicetree/bindings/iio/accel/bosch,bma255.yaml b/Documentation/devicetree/bindings/iio/accel/bosch,bma255.yaml
> new file mode 100644
> index 000000000000..5f48bdcf382c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/accel/bosch,bma255.yaml
> @@ -0,0 +1,73 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/iio/accel/bosch,bma255.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Bosch BMA255 and Similar Accelerometers
> +
> +maintainers:
> +  - Linus Walleij <linus.walleij@linaro.org>
> +
> +description:
> +  3 axis accelerometers with varying range and I2C or SPI
> +  4-wire interface.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - bosch,bmc150
> +      - bosch,bmi055
> +      - bosch,bma255
> +      - bosch,bma250e
> +      - bosch,bma222
> +      - bosch,bma222e
> +      - bosch,bma280
> +
> +  reg:
> +    maxItems: 1
> +
> +  vdd-supply: true
> +  vddio-supply: true
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  mount-matrix:
> +    description: an optional 3x3 mounting rotation matrix.
> +
> +  spi-max-frequency:
> +    maximum: 10000000
> +
> +required:
> +  - compatible
> +  - reg
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    i2c {
> +        #include <dt-bindings/interrupt-controller/irq.h>
Off the top of my head I'm not sure it matters, but this placement of the
include is inconsistent with the spi case below.  Move it outside the i2c {

If that's all that comes up in this round I'll do it whilst applying.

> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +        accelerometer@8 {
> +            compatible = "bosch,bma222";
> +            reg = <0x08>;
> +            vddio-supply = <&vddio>;
> +            vdd-supply = <&vdd>;
> +            interrupts = <57 IRQ_TYPE_EDGE_FALLING>;
> +        };
> +    };
> +  - |
> +    # include <dt-bindings/interrupt-controller/irq.h>
> +    spi {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +        accel@0 {
> +            compatible = "bosch,bma222";
> +            reg = <0>;
> +            spi-max-frequency = <10000000>;
> +        };
> +    };
> +...