devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: George McCollister <george.mccollister@gmail.com>
To: Andrew Lunn <andrew@lunn.ch>,
	Vivien Didelot <vivien.didelot@gmail.com>,
	Florian Fainelli <f.fainelli@gmail.com>,
	Vladimir Oltean <olteanv@gmail.com>
Cc: "David S . Miller " <davem@davemloft.net>,
	netdev@vger.kernel.org, devicetree@vger.kernel.org,
	George McCollister <george.mccollister@gmail.com>
Subject: [PATCH net-next v2 1/3] dsa: add support for Arrow XRS700x tag trailer
Date: Wed, 25 Nov 2020 13:37:38 -0600	[thread overview]
Message-ID: <20201125193740.36825-2-george.mccollister@gmail.com> (raw)
In-Reply-To: <20201125193740.36825-1-george.mccollister@gmail.com>

Add support for Arrow SpeedChips XRS700x single byte tag trailer. This
is modeled on tag_trailer.c which works in a similar way.

Signed-off-by: George McCollister <george.mccollister@gmail.com>
---
 include/net/dsa.h     |  2 ++
 net/dsa/Kconfig       |  6 +++++
 net/dsa/Makefile      |  1 +
 net/dsa/tag_xrs700x.c | 67 +++++++++++++++++++++++++++++++++++++++++++++++++++
 4 files changed, 76 insertions(+)
 create mode 100644 net/dsa/tag_xrs700x.c

diff --git a/include/net/dsa.h b/include/net/dsa.h
index 2e64e8de4631..eb46ecdcf165 100644
--- a/include/net/dsa.h
+++ b/include/net/dsa.h
@@ -46,6 +46,7 @@ struct phylink_link_state;
 #define DSA_TAG_PROTO_AR9331_VALUE		16
 #define DSA_TAG_PROTO_RTL4_A_VALUE		17
 #define DSA_TAG_PROTO_HELLCREEK_VALUE		18
+#define DSA_TAG_PROTO_XRS700X_VALUE		19
 
 enum dsa_tag_protocol {
 	DSA_TAG_PROTO_NONE		= DSA_TAG_PROTO_NONE_VALUE,
@@ -67,6 +68,7 @@ enum dsa_tag_protocol {
 	DSA_TAG_PROTO_AR9331		= DSA_TAG_PROTO_AR9331_VALUE,
 	DSA_TAG_PROTO_RTL4_A		= DSA_TAG_PROTO_RTL4_A_VALUE,
 	DSA_TAG_PROTO_HELLCREEK		= DSA_TAG_PROTO_HELLCREEK_VALUE,
+	DSA_TAG_PROTO_XRS700X		= DSA_TAG_PROTO_XRS700X_VALUE,
 };
 
 struct packet_type;
diff --git a/net/dsa/Kconfig b/net/dsa/Kconfig
index dfecd7b22fd7..2d226a5c085f 100644
--- a/net/dsa/Kconfig
+++ b/net/dsa/Kconfig
@@ -139,4 +139,10 @@ config NET_DSA_TAG_TRAILER
 	  Say Y or M if you want to enable support for tagging frames at
 	  with a trailed. e.g. Marvell 88E6060.
 
+config NET_DSA_TAG_XRS700X
+	tristate "Tag driver for XRS700x switches"
+	help
+	  Say Y or M if you want to enable support for tagging frames for
+	  Arrow SpeedChips XRS700x switches that use a single byte tag trailer.
+
 endif
diff --git a/net/dsa/Makefile b/net/dsa/Makefile
index 0fb2b75a7ae3..92cea2132241 100644
--- a/net/dsa/Makefile
+++ b/net/dsa/Makefile
@@ -18,3 +18,4 @@ obj-$(CONFIG_NET_DSA_TAG_OCELOT) += tag_ocelot.o
 obj-$(CONFIG_NET_DSA_TAG_QCA) += tag_qca.o
 obj-$(CONFIG_NET_DSA_TAG_SJA1105) += tag_sja1105.o
 obj-$(CONFIG_NET_DSA_TAG_TRAILER) += tag_trailer.o
+obj-$(CONFIG_NET_DSA_TAG_XRS700X) += tag_xrs700x.o
diff --git a/net/dsa/tag_xrs700x.c b/net/dsa/tag_xrs700x.c
new file mode 100644
index 000000000000..4ee7c260a8a9
--- /dev/null
+++ b/net/dsa/tag_xrs700x.c
@@ -0,0 +1,67 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * XRS700x tag format handling
+ * Copyright (c) 2008-2009 Marvell Semiconductor
+ * Copyright (c) 2020 NovaTech LLC
+ */
+
+#include <linux/etherdevice.h>
+#include <linux/list.h>
+#include <linux/slab.h>
+#include <linux/bitops.h>
+
+#include "dsa_priv.h"
+
+static struct sk_buff *xrs700x_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+	struct dsa_port *dp = dsa_slave_to_port(dev);
+	u8 *trailer;
+
+	trailer = skb_put(skb, 1);
+	trailer[0] = BIT(dp->index);
+
+	return skb;
+}
+
+static struct sk_buff *xrs700x_rcv(struct sk_buff *skb, struct net_device *dev,
+				   struct packet_type *pt)
+{
+	int source_port;
+	u8 *trailer;
+
+	if (skb_linearize(skb))
+		return NULL;
+
+	trailer = skb_tail_pointer(skb) - 1;
+
+	source_port = ffs((int)trailer[0]) - 1;
+
+	if (source_port < 0)
+		return NULL;
+
+	skb->dev = dsa_master_find_slave(dev, 0, source_port);
+	if (!skb->dev)
+		return NULL;
+
+	if (pskb_trim_rcsum(skb, skb->len - 1))
+		return NULL;
+
+	/* Frame is forwarded by hardware, don't forward in software. */
+	skb->offload_fwd_mark = 1;
+
+	return skb;
+}
+
+static const struct dsa_device_ops xrs700x_netdev_ops = {
+	.name	= "xrs700x",
+	.proto	= DSA_TAG_PROTO_XRS700X,
+	.xmit	= xrs700x_xmit,
+	.rcv	= xrs700x_rcv,
+	.overhead = 1,
+	.tail_tag = true,
+};
+
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_DSA_TAG_DRIVER(DSA_TAG_PROTO_XRS700X);
+
+module_dsa_tag_driver(xrs700x_netdev_ops);
-- 
2.11.0


  reply	other threads:[~2020-11-25 19:38 UTC|newest]

Thread overview: 46+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-11-25 19:37 [PATCH net-next v2 0/3] Arrow SpeedChips XRS700x DSA Driver George McCollister
2020-11-25 19:37 ` George McCollister [this message]
2020-11-25 20:34   ` [PATCH net-next v2 1/3] dsa: add support for Arrow XRS700x tag trailer Andrew Lunn
2020-11-26 13:50     ` Vladimir Oltean
2020-11-26 14:01       ` Andrew Lunn
2020-11-26 14:28         ` Vladimir Oltean
2020-11-25 20:34   ` Andrew Lunn
2020-11-26  1:31   ` Florian Fainelli
2020-11-25 19:37 ` [PATCH net-next v2 2/3] net: dsa: add Arrow SpeedChips XRS700x driver George McCollister
2020-11-26  1:42   ` Jakub Kicinski
2020-11-26  2:25     ` George McCollister
2020-11-26 13:24       ` Vladimir Oltean
2020-11-26 17:56         ` Vladimir Oltean
2020-11-26 19:07           ` George McCollister
2020-11-26 22:05             ` Vladimir Oltean
2020-11-27 18:35               ` Jakub Kicinski
     [not found]                 ` <CAFSKS=MAdnR2jzmkQfTnSQZ7GY5x5KJE=oeqPCQdbZdf5n=4ZQ@mail.gmail.com>
2020-11-27 19:50                   ` Vladimir Oltean
2020-11-27 20:58                     ` George McCollister
2020-11-27 21:37                       ` Jakub Kicinski
2020-11-27 22:42                         ` Vladimir Oltean
2020-11-27 23:21                         ` Vladimir Oltean
2020-11-27 23:51                           ` Jakub Kicinski
2020-11-27 23:30                         ` Andrew Lunn
2020-11-27 23:39                           ` Vladimir Oltean
2020-11-27 23:56                             ` Jakub Kicinski
2020-11-28  1:45                               ` Vladimir Oltean
2020-11-28  0:02                             ` Vladimir Oltean
2020-11-28  0:39                               ` Andrew Lunn
2020-11-28  1:41                                 ` Vladimir Oltean
2020-11-28  2:15                                   ` Jakub Kicinski
2020-11-30 16:52                                     ` George McCollister
2020-11-30 23:50                                       ` Vladimir Oltean
2020-11-30 23:58                                         ` George McCollister
2020-12-01  0:19                                           ` Vladimir Oltean
2020-11-27 20:47                 ` Andrew Lunn
2020-11-27 21:13                   ` Jakub Kicinski
2020-11-27 21:23                     ` Vladimir Oltean
2020-11-27 21:36                       ` Andrew Lunn
2020-12-02  0:28                         ` Vladimir Oltean
2020-12-02  0:54                           ` Jakub Kicinski
2020-11-27 22:03                       ` Jakub Kicinski
2020-11-27 21:32                     ` Andrew Lunn
2020-11-27 22:14                       ` Jakub Kicinski
2020-11-27 22:46                         ` Andrew Lunn
2020-11-25 19:37 ` [PATCH net-next v2 3/3] dt-bindings: net: dsa: add bindings for xrs700x switches George McCollister
2020-11-26  1:30   ` Florian Fainelli

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201125193740.36825-2-george.mccollister@gmail.com \
    --to=george.mccollister@gmail.com \
    --cc=andrew@lunn.ch \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=f.fainelli@gmail.com \
    --cc=netdev@vger.kernel.org \
    --cc=olteanv@gmail.com \
    --cc=vivien.didelot@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).