* [PATCH] arm64: dts: ls1028a: add optee node
@ 2020-11-15 22:53 Michael Walle
2020-11-30 9:29 ` Shawn Guo
0 siblings, 1 reply; 2+ messages in thread
From: Michael Walle @ 2020-11-15 22:53 UTC (permalink / raw)
To: linux-arm-kernel, devicetree, linux-kernel
Cc: Shawn Guo, Li Yang, Rob Herring, Michael Walle
Add the optee node which can either be enabled by a specific board or by
the bootloader.
Signed-off-by: Michael Walle <michael@walle.cc>
---
arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
index 4a1b46bf0854..b5f9525daa89 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
@@ -93,6 +93,14 @@
clocks = <&osc_27m>;
};
+ firmware {
+ optee {
+ compatible = "linaro,optee-tz";
+ method = "smc";
+ status = "disabled";
+ };
+ };
+
reboot {
compatible ="syscon-reboot";
regmap = <&rst>;
--
2.20.1
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH] arm64: dts: ls1028a: add optee node
2020-11-15 22:53 [PATCH] arm64: dts: ls1028a: add optee node Michael Walle
@ 2020-11-30 9:29 ` Shawn Guo
0 siblings, 0 replies; 2+ messages in thread
From: Shawn Guo @ 2020-11-30 9:29 UTC (permalink / raw)
To: Michael Walle
Cc: linux-arm-kernel, devicetree, linux-kernel, Li Yang, Rob Herring
On Sun, Nov 15, 2020 at 11:53:14PM +0100, Michael Walle wrote:
> Add the optee node which can either be enabled by a specific board or by
> the bootloader.
>
> Signed-off-by: Michael Walle <michael@walle.cc>
Applied, thanks.
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2020-11-30 9:30 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2020-11-15 22:53 [PATCH] arm64: dts: ls1028a: add optee node Michael Walle
2020-11-30 9:29 ` Shawn Guo
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).