From: "Niklas Söderlund" <niklas.soderlund+renesas@ragnatech.se>
To: Geert Uytterhoeven <geert+renesas@glider.be>,
Rob Herring <robh+dt@kernel.org>,
devicetree@vger.kernel.org
Cc: linux-renesas-soc@vger.kernel.org,
"Niklas Söderlund" <niklas.soderlund+renesas@ragnatech.se>
Subject: [PATCH 1/6] arm64: dts: renesas: r8a77951: Add TMU nodes
Date: Wed, 9 Dec 2020 21:19:45 +0100 [thread overview]
Message-ID: <20201209201950.817566-2-niklas.soderlund+renesas@ragnatech.se> (raw)
In-Reply-To: <20201209201950.817566-1-niklas.soderlund+renesas@ragnatech.se>
Add device nodes for the Timer Unit (TMU) on the Renesas R-Car H3
(r8a77951) SoC.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
---
arch/arm64/boot/dts/renesas/r8a77951.dtsi | 65 +++++++++++++++++++++++
1 file changed, 65 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a77951.dtsi b/arch/arm64/boot/dts/renesas/r8a77951.dtsi
index 9d60bcf69e4f52ce..ecdc18b40a3606f6 100644
--- a/arch/arm64/boot/dts/renesas/r8a77951.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77951.dtsi
@@ -616,6 +616,71 @@ intc_ex: interrupt-controller@e61c0000 {
resets = <&cpg 407>;
};
+ tmu0: timer@e61e0000 {
+ compatible = "renesas,tmu-r8a7795", "renesas,tmu";
+ reg = <0 0xe61e0000 0 0x30>;
+ interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 125>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 125>;
+ status = "disabled";
+ };
+
+ tmu1: timer@e6fc0000 {
+ compatible = "renesas,tmu-r8a7795", "renesas,tmu";
+ reg = <0 0xe6fc0000 0 0x30>;
+ interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 124>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 124>;
+ status = "disabled";
+ };
+
+ tmu2: timer@e6fd0000 {
+ compatible = "renesas,tmu-r8a7795", "renesas,tmu";
+ reg = <0 0xe6fd0000 0 0x30>;
+ interrupts = <GIC_SPI 303 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 123>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 123>;
+ status = "disabled";
+ };
+
+ tmu3: timer@e6fe0000 {
+ compatible = "renesas,tmu-r8a7795", "renesas,tmu";
+ reg = <0 0xe6fe0000 0 0x30>;
+ interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 122>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 122>;
+ status = "disabled";
+ };
+
+ tmu4: timer@ffc00000 {
+ compatible = "renesas,tmu-r8a7795", "renesas,tmu";
+ reg = <0 0xffc00000 0 0x30>;
+ interrupts = <GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 440 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 121>;
+ clock-names = "fck";
+ power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+ resets = <&cpg 121>;
+ status = "disabled";
+ };
+
i2c0: i2c@e6500000 {
#address-cells = <1>;
#size-cells = <0>;
--
2.29.2
next prev parent reply other threads:[~2020-12-09 20:21 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-09 20:19 [PATCH 0/6] arm64: dts: renesas: Add TMU nodes Niklas Söderlund
2020-12-09 20:19 ` Niklas Söderlund [this message]
2020-12-10 13:10 ` [PATCH 1/6] arm64: dts: renesas: r8a77951: " Geert Uytterhoeven
2020-12-10 15:14 ` Niklas Söderlund
2020-12-09 20:19 ` [PATCH 2/6] arm64: dts: renesas: r8a77960: " Niklas Söderlund
2020-12-09 20:19 ` [PATCH 3/6] arm64: dts: renesas: r8a77961: " Niklas Söderlund
2020-12-09 20:19 ` [PATCH 4/6] arm64: dts: renesas: r8a77965: " Niklas Söderlund
2020-12-09 20:19 ` [PATCH 5/6] arm64: dts: renesas: r8a77990: " Niklas Söderlund
2020-12-09 20:19 ` [PATCH 6/6] arm64: dts: renesas: r8a77995: " Niklas Söderlund
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201209201950.817566-2-niklas.soderlund+renesas@ragnatech.se \
--to=niklas.soderlund+renesas@ragnatech.se \
--cc=devicetree@vger.kernel.org \
--cc=geert+renesas@glider.be \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).