Re: [PATCH v1 3/6] dt-bindings: display: add Unisoc's dpu bindings

[Rob Herring <robh@kernel.org>]

On Mon, Dec 07, 2020 at 10:50:23PM +0800, Kevin Tang wrote:
> From: Kevin Tang <kevin.tang@unisoc.com>
> 
> DPU (Display Processor Unit) is the Display Controller for the Unisoc SoCs
> which transfers the image data from a video memory buffer to an internal
> LCD interface.
> 
> Cc: Orson Zhai <orsonzhai@gmail.com>
> Cc: Chunyan Zhang <zhang.lyra@gmail.com>
> Signed-off-by: Kevin Tang <kevin.tang@unisoc.com>
> ---
>  .../bindings/display/sprd/sprd,sharkl3-dpu.yaml    | 83 ++++++++++++++++++++++
>  1 file changed, 83 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dpu.yaml
> 
> diff --git a/Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dpu.yaml b/Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dpu.yaml
> new file mode 100644
> index 0000000..a9052e1
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/sprd/sprd,sharkl3-dpu.yaml
> @@ -0,0 +1,83 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/sprd/sprd,sharkl3-dpu.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Unisoc Sharkl3 Display Processor Unit (DPU)
> +
> +maintainers:
> +  - Kevin Tang <kevin.tang@unisoc.com>
> +
> +description: |
> +  DPU (Display Processor Unit) is the Display Controller for the Unisoc SoCs
> +  which transfers the image data from a video memory buffer to an internal
> +  LCD interface.
> +
> +properties:
> +  compatible:
> +    const: sprd,sharkl3-dpu
> +
> +  reg:
> +    maxItems: 1
> +    description:
> +      Physical base address and length of the DPU registers set

Drop. Nothing unique about this.

> +
> +  interrupts:
> +    maxItems: 1
> +    description:
> +      The interrupt signal from DPU

Drop.

> +
> +  clocks:
> +    minItems: 2
> +
> +  clock-names:
> +    items:
> +      - const: clk_src_128m
> +      - const: clk_src_384m
> +
> +  power-domains:
> +    maxItems: 1
> +    description: A phandle to DPU power domain node.

Drop.

> +
> +  iommus:
> +    maxItems: 1
> +    description: A phandle to DPU iommu node.

Drop.

With those,

Reviewed-by: Rob Herring <robh@kernel.org>

> +
> +  port:
> +    type: object
> +    description:
> +      A port node with endpoint definitions as defined in
> +      Documentation/devicetree/bindings/media/video-interfaces.txt.
> +      That port should be the output endpoint, usually output to
> +      the associated DSI.
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - clocks
> +  - clock-names
> +  - port
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/clock/sprd,sc9860-clk.h>
> +    dpu: dpu@63000000 {
> +        compatible = "sprd,sharkl3-dpu";
> +        reg = <0x63000000 0x1000>;
> +        interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
> +        clock-names = "clk_src_128m", "clk_src_384m";
> +
> +        clocks = <&pll CLK_TWPLL_128M>,
> +          <&pll CLK_TWPLL_384M>;
> +
> +        dpu_port: port {
> +            dpu_out: endpoint {
> +                remote-endpoint = <&dsi_in>;
> +            };
> +        };
> +    };
> -- 
> 2.7.4
>