From: Kun Yi <kunyi@google.com>
To: jdelvare@suse.com, linux@roeck-us.net, robh+dt@kernel.org,
mark.rutland@arm.com, supreeth.venkatesh@amd.com
Cc: Kun Yi <kunyi@google.com>,
openbmc@lists.ozlabs.org, linux-hwmon@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH linux hwmon-next v5 2/3] hwmon: (sbtsi) Add documentation
Date: Fri, 11 Dec 2020 13:54:26 -0800 [thread overview]
Message-ID: <20201211215427.3281681-3-kunyi@google.com> (raw)
In-Reply-To: <20201211215427.3281681-1-kunyi@google.com>
Document the SB-TSI sensor interface driver.
Signed-off-by: Kun Yi <kunyi@google.com>
---
Documentation/hwmon/index.rst | 1 +
Documentation/hwmon/sbtsi_temp.rst | 40 ++++++++++++++++++++++++++++++
2 files changed, 41 insertions(+)
create mode 100644 Documentation/hwmon/sbtsi_temp.rst
diff --git a/Documentation/hwmon/index.rst b/Documentation/hwmon/index.rst
index fd6fae46b99c..509fb3bcafb2 100644
--- a/Documentation/hwmon/index.rst
+++ b/Documentation/hwmon/index.rst
@@ -151,6 +151,7 @@ Hardware Monitoring Kernel Drivers
pxe1610
pwm-fan
raspberrypi-hwmon
+ sbtsi_temp
sch5627
sch5636
scpi-hwmon
diff --git a/Documentation/hwmon/sbtsi_temp.rst b/Documentation/hwmon/sbtsi_temp.rst
new file mode 100644
index 000000000000..9f0f197c8aa2
--- /dev/null
+++ b/Documentation/hwmon/sbtsi_temp.rst
@@ -0,0 +1,40 @@
+Kernel driver sbtsi_temp
+==================
+
+Supported hardware:
+
+ * Sideband interface (SBI) Temperature Sensor Interface (SB-TSI)
+ compliant AMD SoC temperature device.
+
+ Prefix: 'sbtsi_temp'
+
+ Addresses scanned: This driver doesn't support address scanning.
+
+ To instantiate this driver on an AMD CPU with SB-TSI
+ support, the i2c bus number would be the bus connected from the board
+ management controller (BMC) to the CPU. The i2c address is specified in
+ Section 6.3.1 of the SoC register reference: The SB-TSI address is normally
+ 98h for socket 0 and 90h for socket 1, but it could vary based on hardware
+ address select pins.
+
+ Datasheet: The SB-TSI interface and protocol is available as part of
+ the open source SoC register reference at:
+
+ https://www.amd.com/system/files/TechDocs/56255_OSRR.pdf
+
+ The Advanced Platform Management Link (APML) Specification is
+ available at:
+
+ http://developer.amd.com/wordpress/media/2012/10/41918.pdf
+
+Author: Kun Yi <kunyi@google.com>
+
+Description
+-----------
+
+The SBI temperature sensor interface (SB-TSI) is an emulation of the software
+and physical interface of a typical 8-pin remote temperature sensor (RTS) on
+AMD SoCs. It implements one temperature sensor with readings and limit
+registers encode the temperature in increments of 0.125 from 0 to 255.875.
+Limits can be set through the writable thresholds, and if reached will trigger
+corresponding alert signals.
--
2.29.2.684.gfbc64c5ab5-goog
next prev parent reply other threads:[~2020-12-11 22:51 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-11 21:54 [PATCH linux hwmon-next v5 0/3] SB-TSI hwmon driver v5 Kun Yi
2020-12-11 21:54 ` [PATCH linux hwmon-next v5 1/3] hwmon: (sbtsi) Add basic support for SB-TSI sensors Kun Yi
2020-12-12 16:44 ` Guenter Roeck
2020-12-14 17:59 ` Kun Yi
2020-12-11 21:54 ` Kun Yi [this message]
2020-12-12 16:45 ` [PATCH linux hwmon-next v5 2/3] hwmon: (sbtsi) Add documentation Guenter Roeck
2020-12-11 21:54 ` [PATCH linux hwmon-next v5 3/3] dt-bindings: (hwmon/sbtsi_tmep) Add SB-TSI hwmon driver bindings Kun Yi
2020-12-11 23:51 ` Guenter Roeck
2020-12-12 1:15 ` Kun Yi
2020-12-12 16:46 ` Guenter Roeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201211215427.3281681-3-kunyi@google.com \
--to=kunyi@google.com \
--cc=devicetree@vger.kernel.org \
--cc=jdelvare@suse.com \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=mark.rutland@arm.com \
--cc=openbmc@lists.ozlabs.org \
--cc=robh+dt@kernel.org \
--cc=supreeth.venkatesh@amd.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).