Re: [PATCH 04/25] dt-bindings: net: dwmac: Refactor snps,*-config properties

[Rob Herring <robh@kernel.org>]

On Mon, Dec 14, 2020 at 12:15:54PM +0300, Serge Semin wrote:
> Currently the "snps,axi-config", "snps,mtl-rx-config" and
> "snps,mtl-tx-config" properties are declared as a single phandle reference
> to a node with corresponding parameters defined. That's not good for
> several reasons. First of all scattering around a device tree some
> particular device-specific configs with no visual relation to that device
> isn't suitable from maintainability point of view. That leads to a
> disturbed representation of the actual device tree mixing actual device
> nodes and some vendor-specific configs. Secondly using the same configs
> set for several device nodes doesn't represent well the devices structure,
> since the interfaces these configs describe in hardware belong to
> different devices and may actually differ. In the later case having the
> configs node separated from the corresponding device nodes gets to be
> even unjustified.
> 
> So instead of having a separate DW *MAC configs nodes we suggest to
> define them as sub-nodes of the device nodes, which interfaces they
> actually describe. By doing so we'll make the DW *MAC nodes visually
> correct describing all the aspects of the IP-core configuration. Thus
> we'll be able to describe the configs sub-nodes bindings right in the
> snps,dwmac.yaml file.
> 
> Note the former "snps,axi-config", "snps,mtl-rx-config" and
> "snps,mtl-tx-config" bindings have been marked as deprecated.
> 
> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
> 
> ---
> 
> Note the current DT schema tool requires the vendor-specific properties to be
> defined in accordance with the schema: dtschema/meta-schemas/vendor-props.yaml
> It means the property can be;
> - boolean,
> - string,
> - defined with $ref and additional constraints,
> - defined with allOf: [ $ref ] and additional constraints.
> 
> The modification provided by this commit needs to extend that definition to
> make the DT schema tool correctly parse this schema. That is we need to let
> the vendors-specific properties to also accept the oneOf-based combined
> sub-schema. Like this:
> 
> --- a/dtschema/meta-schemas/vendor-props.yaml
> +++ b/dtschema/meta-schemas/vendor-props.yaml
> @@ -48,15 +48,24 @@
>        - properties:   # A property with a type and additional constraints
>            $ref:
>              pattern: "types.yaml#[\/]{0,1}definitions\/.*"
> -          allOf:
> -            items:
> -              - properties:
> +
> +        if:
> +          not:
> +            required:
> +              - $ref
> +        then:
> +          patternProperties:
> +            "^(all|one)Of$":
> +              contains:
> +                properties:
>                    $ref:
>                      pattern: "types.yaml#[\/]{0,1}definitions\/.*"
>                  required:
>                    - $ref
> -        oneOf:
> +
> +        anyOf:
>            - required: [ $ref ]
>            - required: [ allOf ]
> +          - required: [ oneOf ]
> 
>  ...
> ---
>  .../devicetree/bindings/net/snps,dwmac.yaml   | 380 +++++++++++++-----
>  1 file changed, 288 insertions(+), 92 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/net/snps,dwmac.yaml b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
> index 0dd543c6c08e..44aa88151cba 100644
> --- a/Documentation/devicetree/bindings/net/snps,dwmac.yaml
> +++ b/Documentation/devicetree/bindings/net/snps,dwmac.yaml
> @@ -150,69 +150,251 @@ properties:
>        in a different mode than the PHY in order to function.
>  
>    snps,axi-config:
> -    $ref: /schemas/types.yaml#definitions/phandle
> -    description:
> -      AXI BUS Mode parameters. Phandle to a node that can contain the
> -      following properties
> -        * snps,lpi_en, enable Low Power Interface
> -        * snps,xit_frm, unlock on WoL
> -        * snps,wr_osr_lmt, max write outstanding req. limit
> -        * snps,rd_osr_lmt, max read outstanding req. limit
> -        * snps,kbbe, do not cross 1KiB boundary.
> -        * snps,blen, this is a vector of supported burst length.
> -        * snps,fb, fixed-burst
> -        * snps,mb, mixed-burst
> -        * snps,rb, rebuild INCRx Burst
> +    description: AXI BUS Mode parameters
> +    oneOf:
> +      - deprecated: true
> +        $ref: /schemas/types.yaml#definitions/phandle
> +      - type: object
> +        properties:

Anywhere have have the same node/property string meaning 2 different 
things is a pain, let's not create another one. Just define a new node 
'axi-config'. Or just put all the properties into the node directly. 
Grouping them has little purpose.

> +          snps,lpi_en:
> +            $ref: /schemas/types.yaml#definitions/flag
> +            description: Enable Low Power Interface
> +
> +          snps,xit_frm:
> +            $ref: /schemas/types.yaml#definitions/flag
> +            description: Unlock on WoL
> +
> +          snps,wr_osr_lmt:
> +            $ref: /schemas/types.yaml#definitions/uint32
> +            description: Max write outstanding req. limit
> +            default: 1
> +            minimum: 0
> +            maximum: 15
> +
> +          snps,rd_osr_lmt:
> +            $ref: /schemas/types.yaml#definitions/uint32
> +            description: Max read outstanding req. limit
> +            default: 1
> +            minimum: 0
> +            maximum: 15
> +
> +          snps,kbbe:
> +            $ref: /schemas/types.yaml#definitions/flag
> +            description: Do not cross 1KiB boundary
> +
> +          snps,blen:
> +            $ref: /schemas/types.yaml#definitions/uint32-array
> +            description: A vector of supported burst lengths
> +            minItems: 7
> +            maxItems: 7
> +            items:
> +              enum: [256, 128, 64, 32, 16, 8, 4, 0]
> +
> +          snps,fb:
> +            $ref: /schemas/types.yaml#definitions/flag
> +            description: Fixed-burst
> +
> +          snps,mb:
> +            $ref: /schemas/types.yaml#definitions/flag
> +            description: Mixed-burst
> +
> +          snps,rb:
> +            $ref: /schemas/types.yaml#definitions/flag
> +            description: Rebuild INCRx Burst
> +
> +        additionalProperties: false
>  
>    snps,mtl-rx-config:
> -    $ref: /schemas/types.yaml#definitions/phandle
>      description:
> -      Multiple RX Queues parameters. Phandle to a node that can
> -      contain the following properties
> -        * snps,rx-queues-to-use, number of RX queues to be used in the
> -          driver
> -        * Choose one of these RX scheduling algorithms
> -          * snps,rx-sched-sp, Strict priority
> -          * snps,rx-sched-wsp, Weighted Strict priority
> -        * For each RX queue
> -          * Choose one of these modes
> -            * snps,dcb-algorithm, Queue to be enabled as DCB
> -            * snps,avb-algorithm, Queue to be enabled as AVB
> -          * snps,map-to-dma-channel, Channel to map
> -          * Specifiy specific packet routing
> -            * snps,route-avcp, AV Untagged Control packets
> -            * snps,route-ptp, PTP Packets
> -            * snps,route-dcbcp, DCB Control Packets
> -            * snps,route-up, Untagged Packets
> -            * snps,route-multi-broad, Multicast & Broadcast Packets
> -          * snps,priority, RX queue priority (Range 0x0 to 0xF)
> +      Multiple RX Queues parameters
> +    oneOf:
> +      - deprecated: true
> +        $ref: /schemas/types.yaml#definitions/phandle
> +      - type: object
> +        properties:
> +          snps,rx-queues-to-use:
> +            $ref: /schemas/types.yaml#definitions/uint32
> +            description: Number of RX queues to be used in the driver
> +            default: 1
> +            minimum: 1
> +
> +        patternProperties:
> +          "^snps,rx-sched-(sp|wsp)$":
> +            $ref: /schemas/types.yaml#definitions/flag
> +            description: Strict/Weighted Strict RX scheduling priority
> +
> +          "^queue[0-9]$":
> +            type: object
> +            description: Each RX Queue parameters
> +
> +            properties:
> +              snps,map-to-dma-channel:
> +                $ref: /schemas/types.yaml#definitions/uint32
> +                description: DMA channel to map
> +
> +              snps,priority:
> +                $ref: /schemas/types.yaml#definitions/uint32
> +                description: RX queue priority
> +                minimum: 0
> +                maximum: 15
> +
> +            patternProperties:
> +              "^snps,(dcb|avb)-algorithm$":
> +                $ref: /schemas/types.yaml#definitions/flag
> +                description: Enable Queue as DCB/AVB
> +
> +              "^snps,route-(avcp|ptp|dcbcp|up|multi-broad)$":
> +                $ref: /schemas/types.yaml#definitions/flag
> +                description:
> +                  AV Untagged/PTP/DCB Control/Untagged/Multicast & Broadcast
> +                  packets routing respectively.
> +
> +            additionalProperties: false
> +
> +            # Choose only one of the Queue modes and the packets routing
> +            allOf:
> +              - not:
> +                  required:
> +                    - snps,dcb-algorithm
> +                    - snps,avb-algorithm
> +              - oneOf:
> +                  - required:
> +                      - snps,route-avcp
> +                  - required:
> +                      - snps,route-ptp
> +                  - required:
> +                      - snps,route-dcbcp
> +                  - required:
> +                      - snps,route-up
> +                  - required:
> +                      - snps,route-multi-broad
> +                  - not:
> +                      anyOf:
> +                        - required:
> +                            - snps,route-avcp
> +                        - required:
> +                            - snps,route-ptp
> +                        - required:
> +                            - snps,route-dcbcp
> +                        - required:
> +                            - snps,route-up
> +                        - required:
> +                            - snps,route-multi-broad
> +
> +        additionalProperties: false
> +
> +        # Choose one of the RX scheduling algorithms
> +        not:
> +          required:
> +            - snps,rx-sched-sp
> +            - snps,rx-sched-wsp
>  
>    snps,mtl-tx-config:
> -    $ref: /schemas/types.yaml#definitions/phandle
>      description:
> -      Multiple TX Queues parameters. Phandle to a node that can
> -      contain the following properties
> -        * snps,tx-queues-to-use, number of TX queues to be used in the
> -          driver
> -        * Choose one of these TX scheduling algorithms
> -          * snps,tx-sched-wrr, Weighted Round Robin
> -          * snps,tx-sched-wfq, Weighted Fair Queuing
> -          * snps,tx-sched-dwrr, Deficit Weighted Round Robin
> -          * snps,tx-sched-sp, Strict priority
> -        * For each TX queue
> -          * snps,weight, TX queue weight (if using a DCB weight
> -            algorithm)
> -          * Choose one of these modes
> -            * snps,dcb-algorithm, TX queue will be working in DCB
> -            * snps,avb-algorithm, TX queue will be working in AVB
> -              [Attention] Queue 0 is reserved for legacy traffic
> -                          and so no AVB is available in this queue.
> -          * Configure Credit Base Shaper (if AVB Mode selected)
> -            * snps,send_slope, enable Low Power Interface
> -            * snps,idle_slope, unlock on WoL
> -            * snps,high_credit, max write outstanding req. limit
> -            * snps,low_credit, max read outstanding req. limit
> -          * snps,priority, TX queue priority (Range 0x0 to 0xF)
> +      Multiple TX Queues parameters
> +    oneOf:
> +      - deprecated: true
> +        $ref: /schemas/types.yaml#definitions/phandle
> +      - type: object
> +        properties:
> +          snps,tx-queues-to-use:
> +            $ref: /schemas/types.yaml#definitions/uint32
> +            description: Number of TX queues to be used in the driver
> +            default: 1
> +            minimum: 1
> +
> +        patternProperties:
> +          "^snps,tx-sched-(wrr|wfq|dwrr|sp)$":
> +            $ref: /schemas/types.yaml#definitions/flag
> +            description:
> +              Weighted Round Robin, Weighted Fair Queuing,
> +              Deficit Weighted Round Robin or Strict TX scheduling priority.
> +
> +          "^queue[0-9]$":
> +            type: object
> +            description: Each TX Queue parameters
> +
> +            properties:
> +              snps,priority:
> +                $ref: /schemas/types.yaml#definitions/uint32
> +                description: TX queue priority
> +                minimum: 0
> +                maximum: 15
> +
> +              snps,weight:
> +                $ref: /schemas/types.yaml#definitions/uint32
> +                description: TX queue weight (if using a DCB weight algorithm)
> +                minimum: 0
> +                maximum: 0x1FFFFF
> +
> +              snps,send_slope:
> +                $ref: /schemas/types.yaml#definitions/uint32
> +                description: Enable Low Power Interface
> +                minimum: 0
> +                maximum: 0x3FFF
> +
> +              snps,idle_slope:
> +                $ref: /schemas/types.yaml#definitions/uint32
> +                description: Unlock on WoL
> +                minimum: 0
> +                maximum: 0x1FFFFF
> +
> +              snps,high_credit:
> +                $ref: /schemas/types.yaml#definitions/uint32
> +                description: Max write outstanding req. limit
> +                minimum: 0
> +                maximum: 0x1FFFFFFF
> +
> +              snps,low_credit:
> +                $ref: /schemas/types.yaml#definitions/uint32
> +                description: Max read outstanding req. limit
> +                minimum: 0
> +                maximum: 0x1FFFFFFF
> +
> +            patternProperties:
> +              "^snps,(dcb|avb)-algorithm$":
> +                $ref: /schemas/types.yaml#definitions/flag
> +                description:
> +                  Enable Queue as DCB/AVB. Note Queue 0 is reserved for legacy
> +                  traffic and so no AVB is available in this queue.
> +
> +            additionalProperties: false
> +
> +            # Choose only one of the Queue modes
> +            not:
> +              required:
> +                - snps,dcb-algorithm
> +                - snps,avb-algorithm
> +
> +            # Credit Base Shaper is configurable for AVB Mode only
> +            dependencies:
> +              snps,send_slope: ["snps,avb-algorithm"]
> +              snps,idle_slope: ["snps,avb-algorithm"]
> +              snps,high_credit: ["snps,avb-algorithm"]
> +              snps,low_credit: ["snps,avb-algorithm"]
> +
> +        additionalProperties: false
> +
> +        # Choose one of the TX scheduling algorithms
> +        oneOf:
> +          - required:
> +              - snps,tx-sched-wrr
> +          - required:
> +              - snps,tx-sched-wfq
> +          - required:
> +              - snps,tx-sched-dwrr
> +          - required:
> +              - snps,tx-sched-sp
> +          - not:
> +              anyOf:
> +                - required:
> +                    - snps,tx-sched-wrr
> +                - required:
> +                    - snps,tx-sched-wfq
> +                - required:
> +                    - snps,tx-sched-dwrr
> +                - required:
> +                    - snps,tx-sched-sp
>  
>    snps,reset-gpio:
>      deprecated: true
> @@ -342,41 +524,6 @@ additionalProperties: true
>  
>  examples:
>    - |
> -    stmmac_axi_setup: stmmac-axi-config {
> -        snps,wr_osr_lmt = <0xf>;
> -        snps,rd_osr_lmt = <0xf>;
> -        snps,blen = <256 128 64 32 0 0 0>;
> -    };
> -
> -    mtl_rx_setup: rx-queues-config {
> -        snps,rx-queues-to-use = <1>;
> -        snps,rx-sched-sp;
> -        queue0 {
> -            snps,dcb-algorithm;
> -            snps,map-to-dma-channel = <0x0>;
> -            snps,priority = <0x0>;
> -        };
> -    };
> -
> -    mtl_tx_setup: tx-queues-config {
> -        snps,tx-queues-to-use = <2>;
> -        snps,tx-sched-wrr;
> -        queue0 {
> -            snps,weight = <0x10>;
> -            snps,dcb-algorithm;
> -            snps,priority = <0x0>;
> -        };
> -
> -        queue1 {
> -            snps,avb-algorithm;
> -            snps,send_slope = <0x1000>;
> -            snps,idle_slope = <0x1000>;
> -            snps,high_credit = <0x3E800>;
> -            snps,low_credit = <0xFFC18000>;
> -            snps,priority = <0x1>;
> -        };
> -    };
> -
>      gmac0: ethernet@e0800000 {
>          compatible = "snps,dwxgmac-2.10", "snps,dwxgmac";
>          reg = <0xe0800000 0x8000>;
> @@ -404,6 +551,55 @@ examples:
>              };
>          };
>      };
> +  - |
> +    gmac1: ethernet@f8010000 {
> +        compatible = "snps,dwmac-4.10a", "snps,dwmac";
> +        reg = <0xf8010000 0x4000>;
> +        interrupts = <0 98 4>;
> +        interrupt-names = "macirq";
> +        clock-names = "stmmaceth", "ptp_ref";
> +        clocks = <&clock 4>, <&clock 5>;
> +        phy-mode = "rgmii";
> +        snps,txpbl = <8>;
> +        snps,rxpbl = <2>;
> +        snps,aal;
> +        snps,tso;
> +
> +        snps,axi-config {
> +            snps,wr_osr_lmt = <0xf>;
> +            snps,rd_osr_lmt = <0xf>;
> +            snps,blen = <256 128 64 32 0 0 0>;
> +        };
> +
> +        snps,mtl-rx-config {
> +            snps,rx-queues-to-use = <1>;
> +            snps,rx-sched-sp;
> +            queue0 {
> +               snps,dcb-algorithm;
> +               snps,map-to-dma-channel = <0x0>;
> +               snps,priority = <0x0>;
> +            };
> +        };
> +
> +        snps,mtl-tx-config {
> +            snps,tx-queues-to-use = <2>;
> +            snps,tx-sched-wrr;
> +            queue0 {
> +                snps,weight = <0x10>;
> +                snps,dcb-algorithm;
> +                snps,priority = <0x0>;
> +            };
> +
> +            queue1 {
> +                snps,avb-algorithm;
> +                snps,send_slope = <0x1000>;
> +                snps,idle_slope = <0x1000>;
> +                snps,high_credit = <0x3E800>;
> +                snps,low_credit = <0xFFC18000>;
> +                snps,priority = <0x1>;
> +            };
> +        };
> +    };
>  
>  # FIXME: We should set it, but it would report all the generic
>  # properties as additional properties.
> -- 
> 2.29.2
>