[PATCH v2 2/2] phy: rockchip: emmc, add vendor prefix to dts properties

[Chris Ruehl <chris.ruehl@gtsys.com.hk>]

Update the implementation add "rockchip," vendor prefix for the
optional dts properties. Prefix referred from vendor-prefixes.yaml.
Follow up with
commit 8b5c2b45b8f0a ("phy: rockchip: set pulldown for strobe line in dts")
commit a8cef928276bb ("phy: rockchip-emmc: output tap delay dt property")

Signed-off-by: Chris Ruehl <chris.ruehl@gtsys.com.hk>
---
 drivers/phy/rockchip/phy-rockchip-emmc.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/phy/rockchip/phy-rockchip-emmc.c b/drivers/phy/rockchip/phy-rockchip-emmc.c
index 1e424f263e7a..860b2fbbb092 100644
--- a/drivers/phy/rockchip/phy-rockchip-emmc.c
+++ b/drivers/phy/rockchip/phy-rockchip-emmc.c
@@ -380,10 +380,10 @@ static int rockchip_emmc_phy_probe(struct platform_device *pdev)
 	if (!of_property_read_u32(dev->of_node, "drive-impedance-ohm", &val))
 		rk_phy->drive_impedance = convert_drive_impedance_ohm(pdev, val);
 
-	if (of_property_read_bool(dev->of_node, "enable-strobe-pulldown"))
+	if (of_property_read_bool(dev->of_node, "rockchip,enable-strobe-pulldown"))
 		rk_phy->enable_strobe_pulldown = PHYCTRL_REN_STRB_ENABLE;
 
-	if (!of_property_read_u32(dev->of_node, "output-tapdelay-select", &val)) {
+	if (!of_property_read_u32(dev->of_node, "rockchip,output-tapdelay-select", &val)) {
 		if (val <= PHYCTRL_OTAPDLYSEL_MAXVALUE)
 			rk_phy->output_tapdelay_select = val;
 		else
-- 
2.20.1