From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
To: Andy Gross <agross@kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Lee Jones <lee.jones@linaro.org>
Cc: linux-arm-msm@vger.kernel.org,
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 3/4] arm64: dts: qcom: Add Bluetooth support on RB5
Date: Sun, 20 Dec 2020 19:58:44 +0300 [thread overview]
Message-ID: <20201220165845.3712599-4-dmitry.baryshkov@linaro.org> (raw)
In-Reply-To: <20201220165845.3712599-1-dmitry.baryshkov@linaro.org>
From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Add Bluetooth support on RB5 using the onboard QCA6391 WLAN+BT chipset.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
[DB: added qca639x power domain]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
arch/arm64/boot/dts/qcom/qrb5165-rb5.dts | 97 ++++++++++++++++++++++++
1 file changed, 97 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
index 1be984d89f48..e6bab9960cea 100644
--- a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
+++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
@@ -17,6 +17,7 @@ / {
compatible = "qcom,qrb5165-rb5", "qcom,sm8250";
aliases {
+ hsuart0 = &uart6;
serial0 = &uart12;
sdhc2 = &sdhc_2;
};
@@ -118,6 +119,23 @@ vreg_s4a_1p8: vreg-s4a-1p8 {
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
+
+ qca639x: qca639x {
+ compatible = "qcom,qca639x";
+ #power-domain-cells = <0>;
+
+ vddaon-supply = <&vreg_s6a_0p95>;
+ vddpmu-supply = <&vreg_s2f_0p95>;
+ vddrfa1-supply = <&vreg_s2f_0p95>;
+ vddrfa2-supply = <&vreg_s8c_1p3>;
+ vddrfa3-supply = <&vreg_s5a_1p9>;
+ vddpcie1-supply = <&vreg_s8c_1p3>;
+ vddpcie2-supply = <&vreg_s5a_1p9>;
+ vddio-supply = <&vreg_s4a_1p8>;
+ pinctrl-names = "default", "active";
+ pinctrl-0 = <&wlan_default_state &bt_default_state>;
+ pinctrl-1 = <&wlan_active_state &bt_active_state>;
+ };
};
&apps_rsc {
@@ -131,6 +149,13 @@ pm8009-rpmh-regulators {
vdd-l5-l6-supply = <&vreg_bob>;
vdd-l7-supply = <&vreg_s4a_1p8>;
+ vreg_s2f_0p95: smps2 {
+ regulator-name = "vreg_s2f_0p95";
+ regulator-min-microvolt = <512000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+ };
+
vreg_l1f_1p1: ldo1 {
regulator-name = "vreg_l1f_1p1";
regulator-min-microvolt = <1104000>;
@@ -513,6 +538,26 @@ &pm8150_rtc {
status = "okay";
};
+&qup_uart6_default {
+ ctsrx {
+ pins = "gpio16", "gpio19";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ rts {
+ pins = "gpio17";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ tx {
+ pins = "gpio18";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+};
+
&qupv3_id_0 {
status = "okay";
};
@@ -738,6 +783,28 @@ &tlmm {
"HST_WLAN_UART_TX",
"HST_WLAN_UART_RX";
+ bt_default_state: bt-default-state {
+ bt-en {
+ pins = "gpio21";
+ function = "gpio";
+
+ drive-strength = <16>;
+ output-low;
+ bias-pull-up;
+ };
+ };
+
+ bt_active_state: bt-active-state {
+ bt-en {
+ pins = "gpio21";
+ function = "gpio";
+
+ drive-strength = <16>;
+ output-high;
+ bias-pull-up;
+ };
+ };
+
pcie0_default_state: pcie0-default {
clkreq {
pins = "gpio80";
@@ -838,6 +905,36 @@ sdc2_card_det_n: sd-card-det-n {
function = "gpio";
bias-pull-up;
};
+
+ wlan_default_state: wlan-default-state {
+ wlan-en {
+ pins = "gpio20";
+ function = "gpio";
+
+ drive-strength = <16>;
+ output-low;
+ bias-pull-up;
+ };
+ };
+
+ wlan_active_state: wlan-active-state {
+ wlan-en {
+ pins = "gpio20";
+ function = "gpio";
+
+ drive-strength = <16>;
+ output-high;
+ bias-pull-up;
+ };
+ };
+};
+
+&uart6 {
+ status = "okay";
+ bluetooth {
+ compatible = "qcom,qca6390-bt";
+ power-domains = <&qca639x>;
+ };
};
&uart12 {
--
2.29.2
next prev parent reply other threads:[~2020-12-20 17:00 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-20 16:58 [PATCH 0/4] Add support for Qualcomm QCA639x chips family Dmitry Baryshkov
2020-12-20 16:58 ` [PATCH 1/4] dt-bindings: mfd: qcom,qca639x: add binding for QCA639x defvice Dmitry Baryshkov
2020-12-31 22:50 ` Rob Herring
2021-01-03 3:41 ` Dmitry Baryshkov
2021-01-14 14:33 ` Rob Herring
2021-01-14 16:55 ` Dmitry Baryshkov
2020-12-20 16:58 ` [PATCH 2/4] mfd: qca639x: add support for QCA639x powerup sequence Dmitry Baryshkov
2020-12-21 9:02 ` Lee Jones
2020-12-21 14:08 ` Dmitry Baryshkov
2020-12-22 10:16 ` Lee Jones
2020-12-31 22:52 ` Rob Herring
2020-12-20 16:58 ` Dmitry Baryshkov [this message]
2020-12-20 16:58 ` [PATCH 4/4] arm64: dtb: qcom: qrb5165-rb5: add power domain to pcie0 phy Dmitry Baryshkov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201220165845.3712599-4-dmitry.baryshkov@linaro.org \
--to=dmitry.baryshkov@linaro.org \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=lee.jones@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=manivannan.sadhasivam@linaro.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).