[PATCH AUTOSEL 5.4 053/130] ARM: dts: NSP: Fix Ethernet switch SGMII register name

[PATCH AUTOSEL 5.4 053/130] ARM: dts: NSP: Fix Ethernet switch SGMII register name

[Sasha Levin]

From: Florian Fainelli <f.fainelli@gmail.com>

[ Upstream commit 8b0235d1deace8f1bd8cdd149d698fee3974fdf4 ]

The register name should be "sgmii_config", not "sgmii", this is not a
functional change since no code is currently looking for that register
by name (or at all).

Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/bcm-nsp.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi
index 8615d89fa4690..eff99bd44b38e 100644
--- a/arch/arm/boot/dts/bcm-nsp.dtsi
+++ b/arch/arm/boot/dts/bcm-nsp.dtsi
@@ -388,7 +388,7 @@ srab: srab@36000 {
 			reg = <0x36000 0x1000>,
 			      <0x3f308 0x8>,
 			      <0x3f410 0xc>;
-			reg-names = "srab", "mux_config", "sgmii";
+			reg-names = "srab", "mux_config", "sgmii_config";
 			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
-- 
2.27.0

[PATCH AUTOSEL 5.4 061/130] ARM: dts: hisilicon: fix errors detected by snps-dw-apb-uart.yaml

[Sasha Levin]

From: Zhen Lei <thunder.leizhen@huawei.com>

[ Upstream commit 30ea026e33c6dda48849d9fe0d15c1d280a92d53 ]

1. Change node name to match '^serial(@[0-9a-f,]+)*$'
2. Change clock-names to "baudclk", "apb_pclk". Both of them use the same
   clock.

Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/hip01.dtsi    | 24 ++++++++++++------------
 arch/arm/boot/dts/hip04-d01.dts |  2 +-
 arch/arm/boot/dts/hip04.dtsi    |  6 +++---
 3 files changed, 16 insertions(+), 16 deletions(-)

diff --git a/arch/arm/boot/dts/hip01.dtsi b/arch/arm/boot/dts/hip01.dtsi
index 975d39828405f..fd09e6d9309c7 100644
--- a/arch/arm/boot/dts/hip01.dtsi
+++ b/arch/arm/boot/dts/hip01.dtsi
@@ -41,41 +41,41 @@ amba {
 			compatible = "simple-bus";
 			ranges;
 
-			uart0: uart@10001000 {
+			uart0: serial@10001000 {
 				compatible = "snps,dw-apb-uart";
 				reg = <0x10001000 0x1000>;
-				clocks = <&hisi_refclk144mhz>;
-				clock-names = "apb_pclk";
+				clocks = <&hisi_refclk144mhz>, <&hisi_refclk144mhz>;
+				clock-names = "baudclk", "apb_pclk";
 				reg-shift = <2>;
 				interrupts = <0 32 4>;
 				status = "disabled";
 			};
 
-			uart1: uart@10002000 {
+			uart1: serial@10002000 {
 				compatible = "snps,dw-apb-uart";
 				reg = <0x10002000 0x1000>;
-				clocks = <&hisi_refclk144mhz>;
-				clock-names = "apb_pclk";
+				clocks = <&hisi_refclk144mhz>, <&hisi_refclk144mhz>;
+				clock-names = "baudclk", "apb_pclk";
 				reg-shift = <2>;
 				interrupts = <0 33 4>;
 				status = "disabled";
 			};
 
-			uart2: uart@10003000 {
+			uart2: serial@10003000 {
 				compatible = "snps,dw-apb-uart";
 				reg = <0x10003000 0x1000>;
-				clocks = <&hisi_refclk144mhz>;
-				clock-names = "apb_pclk";
+				clocks = <&hisi_refclk144mhz>, <&hisi_refclk144mhz>;
+				clock-names = "baudclk", "apb_pclk";
 				reg-shift = <2>;
 				interrupts = <0 34 4>;
 				status = "disabled";
 			};
 
-			uart3: uart@10006000 {
+			uart3: serial@10006000 {
 				compatible = "snps,dw-apb-uart";
 				reg = <0x10006000 0x1000>;
-				clocks = <&hisi_refclk144mhz>;
-				clock-names = "apb_pclk";
+				clocks = <&hisi_refclk144mhz>, <&hisi_refclk144mhz>;
+				clock-names = "baudclk", "apb_pclk";
 				reg-shift = <2>;
 				interrupts = <0 4 4>;
 				status = "disabled";
diff --git a/arch/arm/boot/dts/hip04-d01.dts b/arch/arm/boot/dts/hip04-d01.dts
index 9019e0d2ef60b..f5691dbc26d24 100644
--- a/arch/arm/boot/dts/hip04-d01.dts
+++ b/arch/arm/boot/dts/hip04-d01.dts
@@ -22,7 +22,7 @@ memory@0,10000000 {
 	};
 
 	soc {
-		uart0: uart@4007000 {
+		uart0: serial@4007000 {
 			status = "ok";
 		};
 	};
diff --git a/arch/arm/boot/dts/hip04.dtsi b/arch/arm/boot/dts/hip04.dtsi
index 4263a9339c2e5..c12ded274c755 100644
--- a/arch/arm/boot/dts/hip04.dtsi
+++ b/arch/arm/boot/dts/hip04.dtsi
@@ -250,12 +250,12 @@ arm-pmu {
 				     <0 79 4>;
 		};
 
-		uart0: uart@4007000 {
+		uart0: serial@4007000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x4007000 0x1000>;
 			interrupts = <0 381 4>;
-			clocks = <&clk_168m>;
-			clock-names = "uartclk";
+			clocks = <&clk_168m>, <&clk_168m>;
+			clock-names = "baudclk", "apb_pclk";
 			reg-shift = <2>;
 			status = "disabled";
 		};
-- 
2.27.0

[PATCH AUTOSEL 5.4 062/130] ARM: dts: hisilicon: fix errors detected by pl011.yaml

[Sasha Levin]

From: Zhen Lei <thunder.leizhen@huawei.com>

[ Upstream commit e5e225fd495ef1dffc64b81b2094e427f9cc4016 ]

1. Change node name to match '^serial(@[0-9a-f,]+)*$'
2. Change clock-names to "uartclk", "apb_pclk". Both of them use the same
   clock.
3. Change pinctrl-names to "default", "sleep".

Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/hi3519.dtsi       | 20 +++++++++----------
 arch/arm/boot/dts/hi3620-hi4511.dts | 20 +++++++++----------
 arch/arm/boot/dts/hi3620.dtsi       | 30 ++++++++++++++---------------
 arch/arm/boot/dts/hisi-x5hd2.dtsi   | 30 ++++++++++++++---------------
 4 files changed, 50 insertions(+), 50 deletions(-)

diff --git a/arch/arm/boot/dts/hi3519.dtsi b/arch/arm/boot/dts/hi3519.dtsi
index 410409a0ed662..630753c0d7044 100644
--- a/arch/arm/boot/dts/hi3519.dtsi
+++ b/arch/arm/boot/dts/hi3519.dtsi
@@ -52,8 +52,8 @@ uart0: serial@12100000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x12100000 0x1000>;
 			interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&crg HI3519_UART0_CLK>;
-			clock-names = "apb_pclk";
+			clocks = <&crg HI3519_UART0_CLK>, <&crg HI3519_UART0_CLK>;
+			clock-names = "uartclk", "apb_pclk";
 			status = "disable";
 		};
 
@@ -61,8 +61,8 @@ uart1: serial@12101000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x12101000 0x1000>;
 			interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&crg HI3519_UART1_CLK>;
-			clock-names = "apb_pclk";
+			clocks = <&crg HI3519_UART1_CLK>, <&crg HI3519_UART1_CLK>;
+			clock-names = "uartclk", "apb_pclk";
 			status = "disable";
 		};
 
@@ -70,8 +70,8 @@ uart2: serial@12102000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x12102000 0x1000>;
 			interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&crg HI3519_UART2_CLK>;
-			clock-names = "apb_pclk";
+			clocks = <&crg HI3519_UART2_CLK>, <&crg HI3519_UART2_CLK>;
+			clock-names = "uartclk", "apb_pclk";
 			status = "disable";
 		};
 
@@ -79,8 +79,8 @@ uart3: serial@12103000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x12103000 0x1000>;
 			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&crg HI3519_UART3_CLK>;
-			clock-names = "apb_pclk";
+			clocks = <&crg HI3519_UART3_CLK>, <&crg HI3519_UART3_CLK>;
+			clock-names = "uartclk", "apb_pclk";
 			status = "disable";
 		};
 
@@ -88,8 +88,8 @@ uart4: serial@12104000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x12104000 0x1000>;
 			interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&crg HI3519_UART4_CLK>;
-			clock-names = "apb_pclk";
+			clocks = <&crg HI3519_UART4_CLK>, <&crg HI3519_UART4_CLK>;
+			clock-names = "uartclk", "apb_pclk";
 			status = "disable";
 		};
 
diff --git a/arch/arm/boot/dts/hi3620-hi4511.dts b/arch/arm/boot/dts/hi3620-hi4511.dts
index 8c703c3f2fe09..1c62bdcca647a 100644
--- a/arch/arm/boot/dts/hi3620-hi4511.dts
+++ b/arch/arm/boot/dts/hi3620-hi4511.dts
@@ -27,36 +27,36 @@ dual_timer0: dual_timer@800000 {
 			status = "ok";
 		};
 
-		uart0: uart@b00000 {	/* console */
-			pinctrl-names = "default", "idle";
+		uart0: serial@b00000 {	/* console */
+			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&uart0_pmx_func &uart0_cfg_func>;
 			pinctrl-1 = <&uart0_pmx_idle &uart0_cfg_idle>;
 			status = "ok";
 		};
 
-		uart1: uart@b01000 { /* modem */
-			pinctrl-names = "default", "idle";
+		uart1: serial@b01000 { /* modem */
+			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&uart1_pmx_func &uart1_cfg_func>;
 			pinctrl-1 = <&uart1_pmx_idle &uart1_cfg_idle>;
 			status = "ok";
 		};
 
-		uart2: uart@b02000 { /* audience */
-			pinctrl-names = "default", "idle";
+		uart2: serial@b02000 { /* audience */
+			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&uart2_pmx_func &uart2_cfg_func>;
 			pinctrl-1 = <&uart2_pmx_idle &uart2_cfg_idle>;
 			status = "ok";
 		};
 
-		uart3: uart@b03000 {
-			pinctrl-names = "default", "idle";
+		uart3: serial@b03000 {
+			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&uart3_pmx_func &uart3_cfg_func>;
 			pinctrl-1 = <&uart3_pmx_idle &uart3_cfg_idle>;
 			status = "ok";
 		};
 
-		uart4: uart@b04000 {
-			pinctrl-names = "default", "idle";
+		uart4: serial@b04000 {
+			pinctrl-names = "default", "sleep";
 			pinctrl-0 = <&uart4_pmx_func &uart4_cfg_func>;
 			pinctrl-1 = <&uart4_pmx_idle &uart4_cfg_func>;
 			status = "ok";
diff --git a/arch/arm/boot/dts/hi3620.dtsi b/arch/arm/boot/dts/hi3620.dtsi
index 9c207a690df50..cb7e932e094f6 100644
--- a/arch/arm/boot/dts/hi3620.dtsi
+++ b/arch/arm/boot/dts/hi3620.dtsi
@@ -162,48 +162,48 @@ timer5: timer@600 {
 			interrupts = <1 13 0xf01>;
 		};
 
-		uart0: uart@b00000 {
+		uart0: serial@b00000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0xb00000 0x1000>;
 			interrupts = <0 20 4>;
-			clocks = <&clock HI3620_UARTCLK0>;
-			clock-names = "apb_pclk";
+			clocks = <&clock HI3620_UARTCLK0>, <&clock HI3620_UARTCLK0>;
+			clock-names = "uartclk", "apb_pclk";
 			status = "disabled";
 		};
 
-		uart1: uart@b01000 {
+		uart1: serial@b01000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0xb01000 0x1000>;
 			interrupts = <0 21 4>;
-			clocks = <&clock HI3620_UARTCLK1>;
-			clock-names = "apb_pclk";
+			clocks = <&clock HI3620_UARTCLK1>, <&clock HI3620_UARTCLK1>;
+			clock-names = "uartclk", "apb_pclk";
 			status = "disabled";
 		};
 
-		uart2: uart@b02000 {
+		uart2: serial@b02000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0xb02000 0x1000>;
 			interrupts = <0 22 4>;
-			clocks = <&clock HI3620_UARTCLK2>;
-			clock-names = "apb_pclk";
+			clocks = <&clock HI3620_UARTCLK2>, <&clock HI3620_UARTCLK2>;
+			clock-names = "uartclk", "apb_pclk";
 			status = "disabled";
 		};
 
-		uart3: uart@b03000 {
+		uart3: serial@b03000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0xb03000 0x1000>;
 			interrupts = <0 23 4>;
-			clocks = <&clock HI3620_UARTCLK3>;
-			clock-names = "apb_pclk";
+			clocks = <&clock HI3620_UARTCLK3>, <&clock HI3620_UARTCLK3>;
+			clock-names = "uartclk", "apb_pclk";
 			status = "disabled";
 		};
 
-		uart4: uart@b04000 {
+		uart4: serial@b04000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0xb04000 0x1000>;
 			interrupts = <0 24 4>;
-			clocks = <&clock HI3620_UARTCLK4>;
-			clock-names = "apb_pclk";
+			clocks = <&clock HI3620_UARTCLK4>, <&clock HI3620_UARTCLK4>;
+			clock-names = "uartclk", "apb_pclk";
 			status = "disabled";
 		};
 
diff --git a/arch/arm/boot/dts/hisi-x5hd2.dtsi b/arch/arm/boot/dts/hisi-x5hd2.dtsi
index 696e6982a688b..d8800992b4d0c 100644
--- a/arch/arm/boot/dts/hisi-x5hd2.dtsi
+++ b/arch/arm/boot/dts/hisi-x5hd2.dtsi
@@ -86,48 +86,48 @@ timer4: timer@a81000 {
 				status = "disabled";
 			};
 
-			uart0: uart@b00000 {
+			uart0: serial@b00000 {
 				compatible = "arm,pl011", "arm,primecell";
 				reg = <0x00b00000 0x1000>;
 				interrupts = <0 49 4>;
-				clocks = <&clock HIX5HD2_FIXED_83M>;
-				clock-names = "apb_pclk";
+				clocks = <&clock HIX5HD2_FIXED_83M>, <&clock HIX5HD2_FIXED_83M>;
+				clock-names = "uartclk", "apb_pclk";
 				status = "disabled";
 			};
 
-			uart1: uart@6000 {
+			uart1: serial@6000 {
 				compatible = "arm,pl011", "arm,primecell";
 				reg = <0x00006000 0x1000>;
 				interrupts = <0 50 4>;
-				clocks = <&clock HIX5HD2_FIXED_83M>;
-				clock-names = "apb_pclk";
+				clocks = <&clock HIX5HD2_FIXED_83M>, <&clock HIX5HD2_FIXED_83M>;
+				clock-names = "uartclk", "apb_pclk";
 				status = "disabled";
 			};
 
-			uart2: uart@b02000 {
+			uart2: serial@b02000 {
 				compatible = "arm,pl011", "arm,primecell";
 				reg = <0x00b02000 0x1000>;
 				interrupts = <0 51 4>;
-				clocks = <&clock HIX5HD2_FIXED_83M>;
-				clock-names = "apb_pclk";
+				clocks = <&clock HIX5HD2_FIXED_83M>, <&clock HIX5HD2_FIXED_83M>;
+				clock-names = "uartclk", "apb_pclk";
 				status = "disabled";
 			};
 
-			uart3: uart@b03000 {
+			uart3: serial@b03000 {
 				compatible = "arm,pl011", "arm,primecell";
 				reg = <0x00b03000 0x1000>;
 				interrupts = <0 52 4>;
-				clocks = <&clock HIX5HD2_FIXED_83M>;
-				clock-names = "apb_pclk";
+				clocks = <&clock HIX5HD2_FIXED_83M>, <&clock HIX5HD2_FIXED_83M>;
+				clock-names = "uartclk", "apb_pclk";
 				status = "disabled";
 			};
 
-			uart4: uart@b04000 {
+			uart4: serial@b04000 {
 				compatible = "arm,pl011", "arm,primecell";
 				reg = <0xb04000 0x1000>;
 				interrupts = <0 53 4>;
-				clocks = <&clock HIX5HD2_FIXED_83M>;
-				clock-names = "apb_pclk";
+				clocks = <&clock HIX5HD2_FIXED_83M>, <&clock HIX5HD2_FIXED_83M>;
+				clock-names = "uartclk", "apb_pclk";
 				status = "disabled";
 			};
 
-- 
2.27.0

[PATCH AUTOSEL 5.4 063/130] ARM: dts: hisilicon: fix errors detected by usb yaml

[Sasha Levin]

From: Zhen Lei <thunder.leizhen@huawei.com>

[ Upstream commit 64f5b52554a1de47a53972a47b9b58d8d66ee5aa ]

1. Change node name to match '^usb(@.*)?'

These errors are detected by generic-ehci.yaml and generic-ohci.yaml.

Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/hisi-x5hd2.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/hisi-x5hd2.dtsi b/arch/arm/boot/dts/hisi-x5hd2.dtsi
index d8800992b4d0c..da42b9400759b 100644
--- a/arch/arm/boot/dts/hisi-x5hd2.dtsi
+++ b/arch/arm/boot/dts/hisi-x5hd2.dtsi
@@ -452,14 +452,14 @@ gmac1: ethernet@1841000 {
 			status = "disabled";
 		};
 
-		usb0: ehci@1890000 {
+		usb0: usb@1890000 {
 			compatible = "generic-ehci";
 			reg = <0x1890000 0x1000>;
 			interrupts = <0 66 4>;
 			clocks = <&clock HIX5HD2_USB_CLK>;
 		};
 
-		usb1: ohci@1880000 {
+		usb1: usb@1880000 {
 			compatible = "generic-ohci";
 			reg = <0x1880000 0x1000>;
 			interrupts = <0 67 4>;
-- 
2.27.0

[PATCH AUTOSEL 5.4 064/130] ARM: dts: hisilicon: fix errors detected by simple-bus.yaml

[Sasha Levin]

From: Zhen Lei <thunder.leizhen@huawei.com>

[ Upstream commit 8e9e8dd7ce093344a89792deaeb6caedde636dcf ]

Change bus node name from "amba" to "amba-bus" to match
'^([a-z][a-z0-9\\-]+-bus|bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'

Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/hi3620-hi4511.dts | 2 +-
 arch/arm/boot/dts/hi3620.dtsi       | 2 +-
 arch/arm/boot/dts/hip01.dtsi        | 2 +-
 arch/arm/boot/dts/hisi-x5hd2.dtsi   | 2 +-
 4 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/hi3620-hi4511.dts b/arch/arm/boot/dts/hi3620-hi4511.dts
index 1c62bdcca647a..29eedc7fef986 100644
--- a/arch/arm/boot/dts/hi3620-hi4511.dts
+++ b/arch/arm/boot/dts/hi3620-hi4511.dts
@@ -22,7 +22,7 @@ memory {
 		reg = <0x40000000 0x20000000>;
 	};
 
-	amba {
+	amba-bus {
 		dual_timer0: dual_timer@800000 {
 			status = "ok";
 		};
diff --git a/arch/arm/boot/dts/hi3620.dtsi b/arch/arm/boot/dts/hi3620.dtsi
index cb7e932e094f6..fa3a287c50b5a 100644
--- a/arch/arm/boot/dts/hi3620.dtsi
+++ b/arch/arm/boot/dts/hi3620.dtsi
@@ -63,7 +63,7 @@ cpu@3 {
 		};
 	};
 
-	amba {
+	amba-bus {
 
 		#address-cells = <1>;
 		#size-cells = <1>;
diff --git a/arch/arm/boot/dts/hip01.dtsi b/arch/arm/boot/dts/hip01.dtsi
index fd09e6d9309c7..2a79636053900 100644
--- a/arch/arm/boot/dts/hip01.dtsi
+++ b/arch/arm/boot/dts/hip01.dtsi
@@ -35,7 +35,7 @@ soc {
 		interrupt-parent = <&gic>;
 		ranges = <0 0x10000000 0x20000000>;
 
-		amba {
+		amba-bus {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			compatible = "simple-bus";
diff --git a/arch/arm/boot/dts/hisi-x5hd2.dtsi b/arch/arm/boot/dts/hisi-x5hd2.dtsi
index da42b9400759b..f9daee9392506 100644
--- a/arch/arm/boot/dts/hisi-x5hd2.dtsi
+++ b/arch/arm/boot/dts/hisi-x5hd2.dtsi
@@ -30,7 +30,7 @@ soc {
 		interrupt-parent = <&gic>;
 		ranges = <0 0xf8000000 0x8000000>;
 
-		amba {
+		amba-bus {
 			#address-cells = <1>;
 			#size-cells = <1>;
 			compatible = "simple-bus";
-- 
2.27.0

[PATCH AUTOSEL 5.4 065/130] ARM: dts: hisilicon: fix errors detected by spi-pl022.yaml

[Sasha Levin]

From: Zhen Lei <thunder.leizhen@huawei.com>

[ Upstream commit 4c246408f0bdbc4100c95a5dad9e0688b4a3cfd0 ]

1. Change clock-names to "sspclk", "apb_pclk". Both of them use the same
   clock.

Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/hi3519.dtsi | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm/boot/dts/hi3519.dtsi b/arch/arm/boot/dts/hi3519.dtsi
index 630753c0d7044..c524c854d3192 100644
--- a/arch/arm/boot/dts/hi3519.dtsi
+++ b/arch/arm/boot/dts/hi3519.dtsi
@@ -127,8 +127,8 @@ spi_bus0: spi@12120000 {
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x12120000 0x1000>;
 			interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&crg HI3519_SPI0_CLK>;
-			clock-names = "apb_pclk";
+			clocks = <&crg HI3519_SPI0_CLK>, <&crg HI3519_SPI0_CLK>;
+			clock-names = "sspclk", "apb_pclk";
 			num-cs = <1>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -139,8 +139,8 @@ spi_bus1: spi@12121000 {
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x12121000 0x1000>;
 			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&crg HI3519_SPI1_CLK>;
-			clock-names = "apb_pclk";
+			clocks = <&crg HI3519_SPI1_CLK>, <&crg HI3519_SPI1_CLK>;
+			clock-names = "sspclk", "apb_pclk";
 			num-cs = <1>;
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -151,8 +151,8 @@ spi_bus2: spi@12122000 {
 			compatible = "arm,pl022", "arm,primecell";
 			reg = <0x12122000 0x1000>;
 			interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&crg HI3519_SPI2_CLK>;
-			clock-names = "apb_pclk";
+			clocks = <&crg HI3519_SPI2_CLK>, <&crg HI3519_SPI2_CLK>;
+			clock-names = "sspclk", "apb_pclk";
 			num-cs = <1>;
 			#address-cells = <1>;
 			#size-cells = <0>;
-- 
2.27.0

[PATCH AUTOSEL 5.4 072/130] arm64: tegra: Fix GIC400 missing GICH/GICV register regions

[Sasha Levin]

From: Marc Zyngier <maz@kernel.org>

[ Upstream commit 776a3c04da9fa144241476f4a0d263899d6cad26 ]

GIC400 has full support for virtualization, and yet the tegra186
DT doesn't expose the GICH/GICV regions (despite exposing the
maintenance interrupt that only makes sense for virtualization).

Add the missing regions, based on the hunch that the HW doesn't
use the CPU build-in interfaces, but instead the external ones
provided by the GIC. KVM's virtual GIC now works with this change.

Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm64/boot/dts/nvidia/tegra186.dtsi | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/nvidia/tegra186.dtsi b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
index 9abf0cb1dd67f..f72c97fe4afc8 100644
--- a/arch/arm64/boot/dts/nvidia/tegra186.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra186.dtsi
@@ -569,7 +569,9 @@ gic: interrupt-controller@3881000 {
 		#interrupt-cells = <3>;
 		interrupt-controller;
 		reg = <0x0 0x03881000 0x0 0x1000>,
-		      <0x0 0x03882000 0x0 0x2000>;
+		      <0x0 0x03882000 0x0 0x2000>,
+		      <0x0 0x03884000 0x0 0x2000>,
+		      <0x0 0x03886000 0x0 0x2000>;
 		interrupts = <GIC_PPI 9
 			(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
 		interrupt-parent = <&gic>;
-- 
2.27.0

[PATCH AUTOSEL 5.4 099/130] ARM: zynq: Fix leds subnode name for zc702/zybo-z7

[Sasha Levin]

From: Michal Simek <michal.simek@xilinx.com>

[ Upstream commit 38d1985fdfcf20dc246b552580479ae602f735d1 ]

Fix the leds subnode names to match (^led-[0-9a-f]$|led).

Similar change has been also done by commit 9a19a39ee48b ("arm64: dts:
zynqmp: Fix leds subnode name for zcu100/ultra96 v1").

The patch is fixing these warnings:
.../zynq-zc702.dt.yaml: leds: 'ds23' does not match any of the regexes:
'(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
>From schema: .../Documentation/devicetree/bindings/leds/leds-gpio.yaml
.../zynq-zybo-z7.dt.yaml: gpio-leds: 'ld4' does not match any of the
regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
>From schema: .../Documentation/devicetree/bindings/leds/leds-gpio.yaml

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/607a66783b129294364abf09a6fc8abd241ff4ee.1606397101.git.michal.simek@xilinx.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 arch/arm/boot/dts/zynq-zc702.dts   | 2 +-
 arch/arm/boot/dts/zynq-zybo-z7.dts | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts
index 27cd6cb52f1ba..10a7d0b8cf8b9 100644
--- a/arch/arm/boot/dts/zynq-zc702.dts
+++ b/arch/arm/boot/dts/zynq-zc702.dts
@@ -49,7 +49,7 @@ sw13 {
 	leds {
 		compatible = "gpio-leds";
 
-		ds23 {
+		led-ds23 {
 			label = "ds23";
 			gpios = <&gpio0 10 0>;
 			linux,default-trigger = "heartbeat";
diff --git a/arch/arm/boot/dts/zynq-zybo-z7.dts b/arch/arm/boot/dts/zynq-zybo-z7.dts
index 357b78a5c11b1..7b87e10d3953b 100644
--- a/arch/arm/boot/dts/zynq-zybo-z7.dts
+++ b/arch/arm/boot/dts/zynq-zybo-z7.dts
@@ -25,7 +25,7 @@ chosen {
 	gpio-leds {
 		compatible = "gpio-leds";
 
-		ld4 {
+		led-ld4 {
 			label = "zynq-zybo-z7:green:ld4";
 			gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
 		};
-- 
2.27.0