From: Sasha Levin <sashal@kernel.org>
To: linux-kernel@vger.kernel.org, stable@vger.kernel.org
Cc: Zhen Lei <thunder.leizhen@huawei.com>,
Wei Xu <xuwei5@hisilicon.com>, Sasha Levin <sashal@kernel.org>,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org
Subject: [PATCH AUTOSEL 4.9 25/48] ARM: dts: hisilicon: fix errors detected by snps-dw-apb-uart.yaml
Date: Tue, 22 Dec 2020 21:23:53 -0500 [thread overview]
Message-ID: <20201223022417.2794032-25-sashal@kernel.org> (raw)
In-Reply-To: <20201223022417.2794032-1-sashal@kernel.org>
From: Zhen Lei <thunder.leizhen@huawei.com>
[ Upstream commit 30ea026e33c6dda48849d9fe0d15c1d280a92d53 ]
1. Change node name to match '^serial(@[0-9a-f,]+)*$'
2. Change clock-names to "baudclk", "apb_pclk". Both of them use the same
clock.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/hip01.dtsi | 24 ++++++++++++------------
arch/arm/boot/dts/hip04-d01.dts | 2 +-
arch/arm/boot/dts/hip04.dtsi | 6 +++---
3 files changed, 16 insertions(+), 16 deletions(-)
diff --git a/arch/arm/boot/dts/hip01.dtsi b/arch/arm/boot/dts/hip01.dtsi
index 4e9562f806a21..85e201ab216b9 100644
--- a/arch/arm/boot/dts/hip01.dtsi
+++ b/arch/arm/boot/dts/hip01.dtsi
@@ -46,41 +46,41 @@ amba {
compatible = "simple-bus";
ranges;
- uart0: uart@10001000 {
+ uart0: serial@10001000 {
compatible = "snps,dw-apb-uart";
reg = <0x10001000 0x1000>;
- clocks = <&hisi_refclk144mhz>;
- clock-names = "apb_pclk";
+ clocks = <&hisi_refclk144mhz>, <&hisi_refclk144mhz>;
+ clock-names = "baudclk", "apb_pclk";
reg-shift = <2>;
interrupts = <0 32 4>;
status = "disabled";
};
- uart1: uart@10002000 {
+ uart1: serial@10002000 {
compatible = "snps,dw-apb-uart";
reg = <0x10002000 0x1000>;
- clocks = <&hisi_refclk144mhz>;
- clock-names = "apb_pclk";
+ clocks = <&hisi_refclk144mhz>, <&hisi_refclk144mhz>;
+ clock-names = "baudclk", "apb_pclk";
reg-shift = <2>;
interrupts = <0 33 4>;
status = "disabled";
};
- uart2: uart@10003000 {
+ uart2: serial@10003000 {
compatible = "snps,dw-apb-uart";
reg = <0x10003000 0x1000>;
- clocks = <&hisi_refclk144mhz>;
- clock-names = "apb_pclk";
+ clocks = <&hisi_refclk144mhz>, <&hisi_refclk144mhz>;
+ clock-names = "baudclk", "apb_pclk";
reg-shift = <2>;
interrupts = <0 34 4>;
status = "disabled";
};
- uart3: uart@10006000 {
+ uart3: serial@10006000 {
compatible = "snps,dw-apb-uart";
reg = <0x10006000 0x1000>;
- clocks = <&hisi_refclk144mhz>;
- clock-names = "apb_pclk";
+ clocks = <&hisi_refclk144mhz>, <&hisi_refclk144mhz>;
+ clock-names = "baudclk", "apb_pclk";
reg-shift = <2>;
interrupts = <0 4 4>;
status = "disabled";
diff --git a/arch/arm/boot/dts/hip04-d01.dts b/arch/arm/boot/dts/hip04-d01.dts
index 40a9e33c2654e..9b2499635dc76 100644
--- a/arch/arm/boot/dts/hip04-d01.dts
+++ b/arch/arm/boot/dts/hip04-d01.dts
@@ -25,7 +25,7 @@ memory@00000000,10000000 {
};
soc {
- uart0: uart@4007000 {
+ uart0: serial@4007000 {
status = "ok";
};
};
diff --git a/arch/arm/boot/dts/hip04.dtsi b/arch/arm/boot/dts/hip04.dtsi
index 44044f2751151..9593a78ccf067 100644
--- a/arch/arm/boot/dts/hip04.dtsi
+++ b/arch/arm/boot/dts/hip04.dtsi
@@ -253,12 +253,12 @@ arm-pmu {
<0 79 4>;
};
- uart0: uart@4007000 {
+ uart0: serial@4007000 {
compatible = "snps,dw-apb-uart";
reg = <0x4007000 0x1000>;
interrupts = <0 381 4>;
- clocks = <&clk_168m>;
- clock-names = "uartclk";
+ clocks = <&clk_168m>, <&clk_168m>;
+ clock-names = "baudclk", "apb_pclk";
reg-shift = <2>;
status = "disabled";
};
--
2.27.0
next parent reply other threads:[~2020-12-23 2:34 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20201223022417.2794032-1-sashal@kernel.org>
2020-12-23 2:23 ` Sasha Levin [this message]
2020-12-23 2:23 ` [PATCH AUTOSEL 4.9 26/48] ARM: dts: hisilicon: fix errors detected by usb yaml Sasha Levin
2020-12-23 2:23 ` [PATCH AUTOSEL 4.9 27/48] ARM: dts: hisilicon: fix errors detected by simple-bus.yaml Sasha Levin
2020-12-23 2:23 ` [PATCH AUTOSEL 4.9 28/48] ARM: dts: hisilicon: fix errors detected by spi-pl022.yaml Sasha Levin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201223022417.2794032-25-sashal@kernel.org \
--to=sashal@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=stable@vger.kernel.org \
--cc=thunder.leizhen@huawei.com \
--cc=xuwei5@hisilicon.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).