From: Kishon Vijay Abraham I <kishon@ti.com>
To: Kishon Vijay Abraham I <kishon@ti.com>,
Vinod Koul <vkoul@kernel.org>, Rob Herring <robh+dt@kernel.org>,
Nishanth Menon <nm@ti.com>,
Swapnil Jakhade <sjakhade@cadence.com>,
Peter Rosin <peda@axentia.se>
Cc: <linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>
Subject: [PATCH 5/7] phy: ti: j721e-wiz: Configure full rate divider for AM64
Date: Thu, 24 Dec 2020 17:12:48 +0530 [thread overview]
Message-ID: <20201224114250.1083-6-kishon@ti.com> (raw)
In-Reply-To: <20201224114250.1083-1-kishon@ti.com>
The frequency of the txmclk between PCIe and SERDES has
changed to 250MHz from 500MHz. Configure full rate divider
for AM64 accordingly.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
drivers/phy/ti/phy-j721e-wiz.c | 43 +++++++++++++++++++++++++++++++---
1 file changed, 40 insertions(+), 3 deletions(-)
diff --git a/drivers/phy/ti/phy-j721e-wiz.c b/drivers/phy/ti/phy-j721e-wiz.c
index 2a03191eac64..08acfab1ebe6 100644
--- a/drivers/phy/ti/phy-j721e-wiz.c
+++ b/drivers/phy/ti/phy-j721e-wiz.c
@@ -101,6 +101,13 @@ static const struct reg_field p_standard_mode[WIZ_MAX_LANES] = {
REG_FIELD(WIZ_LANECTL(3), 24, 25),
};
+static const struct reg_field p0_fullrt_div[WIZ_MAX_LANES] = {
+ REG_FIELD(WIZ_LANECTL(0), 22, 23),
+ REG_FIELD(WIZ_LANECTL(1), 22, 23),
+ REG_FIELD(WIZ_LANECTL(2), 22, 23),
+ REG_FIELD(WIZ_LANECTL(3), 22, 23),
+};
+
static const struct reg_field typec_ln10_swap =
REG_FIELD(WIZ_SERDES_TYPEC, 30, 30);
@@ -193,6 +200,7 @@ static struct wiz_clk_div_sel clk_div_sel[] = {
enum wiz_type {
J721E_WIZ_16G,
J721E_WIZ_10G,
+ AM64_WIZ_10G,
};
#define WIZ_TYPEC_DIR_DEBOUNCE_MIN 100 /* ms */
@@ -210,6 +218,7 @@ struct wiz {
struct regmap_field *p_align[WIZ_MAX_LANES];
struct regmap_field *p_raw_auto_start[WIZ_MAX_LANES];
struct regmap_field *p_standard_mode[WIZ_MAX_LANES];
+ struct regmap_field *p0_fullrt_div[WIZ_MAX_LANES];
struct regmap_field *pma_cmn_refclk_int_mode;
struct regmap_field *pma_cmn_refclk_mode;
struct regmap_field *pma_cmn_refclk_dig_div;
@@ -380,7 +389,7 @@ static int wiz_regfield_init(struct wiz *wiz)
}
clk_mux_sel = &wiz->clk_mux_sel[REFCLK_DIG];
- if (wiz->type == J721E_WIZ_10G)
+ if (wiz->type == J721E_WIZ_10G || wiz->type == AM64_WIZ_10G)
clk_mux_sel->field =
devm_regmap_field_alloc(dev, regmap,
refclk_dig_sel_10g);
@@ -424,6 +433,14 @@ static int wiz_regfield_init(struct wiz *wiz)
i);
return PTR_ERR(wiz->p_standard_mode[i]);
}
+
+ wiz->p0_fullrt_div[i] =
+ devm_regmap_field_alloc(dev, regmap, p0_fullrt_div[i]);
+ if (IS_ERR(wiz->p0_fullrt_div[i])) {
+ dev_err(dev, "P%d_FULLRT_DIV reg field init failed\n",
+ i);
+ return PTR_ERR(wiz->p0_fullrt_div[i]);
+ }
}
wiz->typec_ln10_swap = devm_regmap_field_alloc(dev, regmap,
@@ -719,6 +736,19 @@ static int wiz_phy_reset_assert(struct reset_controller_dev *rcdev,
return ret;
}
+static int wiz_phy_fullrt_div(struct wiz *wiz, int lane)
+{
+ int ret = 0;
+
+ if (wiz->type != AM64_WIZ_10G)
+ return 0;
+
+ if (wiz->lane_phy_type[lane] == PHY_TYPE_PCIE)
+ ret = regmap_field_write(wiz->p0_fullrt_div[lane], 0x1);
+
+ return ret;
+}
+
static int wiz_phy_reset_deassert(struct reset_controller_dev *rcdev,
unsigned long id)
{
@@ -742,6 +772,10 @@ static int wiz_phy_reset_deassert(struct reset_controller_dev *rcdev,
return ret;
}
+ ret = wiz_phy_fullrt_div(wiz, id - 1);
+ if (ret)
+ return ret;
+
if (wiz->lane_phy_type[id - 1] == PHY_TYPE_DP)
ret = regmap_field_write(wiz->p_enable[id - 1], P_ENABLE);
else
@@ -769,6 +803,9 @@ static const struct of_device_id wiz_id_table[] = {
{
.compatible = "ti,j721e-wiz-10g", .data = (void *)J721E_WIZ_10G
},
+ {
+ .compatible = "ti,am64-wiz-10g", .data = (void *)AM64_WIZ_10G
+ },
{}
};
MODULE_DEVICE_TABLE(of, wiz_id_table);
@@ -904,14 +941,14 @@ static int wiz_probe(struct platform_device *pdev)
wiz->dev = dev;
wiz->regmap = regmap;
wiz->num_lanes = num_lanes;
- if (wiz->type == J721E_WIZ_10G)
+ if (wiz->type == J721E_WIZ_10G || wiz->type == AM64_WIZ_10G)
wiz->clk_mux_sel = clk_mux_sel_10g;
else
wiz->clk_mux_sel = clk_mux_sel_16g;
wiz->clk_div_sel = clk_div_sel;
- if (wiz->type == J721E_WIZ_10G)
+ if (wiz->type == J721E_WIZ_10G || wiz->type == AM64_WIZ_10G)
wiz->clk_div_sel_num = WIZ_DIV_NUM_CLOCKS_10G;
else
wiz->clk_div_sel_num = WIZ_DIV_NUM_CLOCKS_16G;
--
2.17.1
next prev parent reply other threads:[~2020-12-24 11:45 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-24 11:42 [PATCH 0/7] AM64: Add SERDES bindings and driver support Kishon Vijay Abraham I
2020-12-24 11:42 ` [PATCH 1/7] dt-bindings: phy: ti,phy-j721e-wiz: Add bindings for AM64 SERDES Wrapper Kishon Vijay Abraham I
2021-01-08 2:58 ` Rob Herring
2020-12-24 11:42 ` [PATCH 2/7] dt-bindings: phy: ti,phy-j721e-wiz: Add binding for phy_en_refclk Kishon Vijay Abraham I
2021-01-08 2:59 ` Rob Herring
2020-12-24 11:42 ` [PATCH 3/7] dt-bindings: phy: cadence-torrent: Add binding for refclk driver Kishon Vijay Abraham I
2021-01-08 3:01 ` Rob Herring
2020-12-24 11:42 ` [PATCH 4/7] dt-bindings: ti-serdes-mux: Add defines for AM64 SoC Kishon Vijay Abraham I
2021-01-08 3:03 ` Rob Herring
2021-01-08 11:01 ` Kishon Vijay Abraham I
2021-01-08 10:46 ` Peter Rosin
2021-01-08 11:03 ` Kishon Vijay Abraham I
2020-12-24 11:42 ` Kishon Vijay Abraham I [this message]
2021-01-13 14:04 ` [PATCH 5/7] phy: ti: j721e-wiz: Configure full rate divider for AM64 Vinod Koul
2020-12-24 11:42 ` [PATCH 6/7] phy: ti: j721e-wiz: Enable reference clock output in cmn_refclk_<p/m> Kishon Vijay Abraham I
2021-01-13 14:12 ` Vinod Koul
2020-12-24 11:42 ` [PATCH 7/7] phy: cadence-torrent: Add support to drive refclk out Kishon Vijay Abraham I
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201224114250.1083-6-kishon@ti.com \
--to=kishon@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nm@ti.com \
--cc=peda@axentia.se \
--cc=robh+dt@kernel.org \
--cc=sjakhade@cadence.com \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).