From: Michael Walle <michael@walle.cc>
To: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Cc: Shawn Guo <shawnguo@kernel.org>, Li Yang <leoyang.li@nxp.com>,
Rob Herring <robh+dt@kernel.org>,
Michael Walle <michael@walle.cc>
Subject: [PATCH 1/7] arm64: dts: ls1012a: use constants in the clockgen phandle
Date: Tue, 29 Dec 2020 12:47:34 +0100 [thread overview]
Message-ID: <20201229114740.7936-2-michael@walle.cc> (raw)
In-Reply-To: <20201229114740.7936-1-michael@walle.cc>
Now that we have constants, use them. This is just a mechanical change.
Signed-off-by: Michael Walle <michael@walle.cc>
---
.../arm64/boot/dts/freescale/fsl-ls1012a.dtsi | 60 +++++++++++++------
1 file changed, 43 insertions(+), 17 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
index 626b709d1fb9..7de6b376d792 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
@@ -7,6 +7,7 @@
*
*/
+#include <dt-bindings/clock/fsl,qoriq-clockgen.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/thermal/thermal.h>
@@ -34,7 +35,7 @@
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x0>;
- clocks = <&clockgen 1 0>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 0>;
#cooling-cells = <2>;
cpu-idle-states = <&CPU_PH20>;
};
@@ -148,7 +149,10 @@
reg-names = "QuadSPI", "QuadSPI-memory";
interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "qspi_en", "qspi";
- clocks = <&clockgen 4 0>, <&clockgen 4 0>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(1)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(1)>;
status = "disabled";
};
@@ -156,7 +160,8 @@
compatible = "fsl,ls1012a-esdhc", "fsl,esdhc";
reg = <0x0 0x1560000 0x0 0x10000>;
interrupts = <0 62 0x4>;
- clocks = <&clockgen 4 0>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(1)>;
voltage-ranges = <1800 1800 3300 3300>;
sdhci,auto-cmd12;
big-endian;
@@ -174,7 +179,8 @@
compatible = "fsl,ls1012a-esdhc", "fsl,esdhc";
reg = <0x0 0x1580000 0x0 0x10000>;
interrupts = <0 65 0x4>;
- clocks = <&clockgen 4 0>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(1)>;
voltage-ranges = <1800 1800 3300 3300>;
sdhci,auto-cmd12;
big-endian;
@@ -341,7 +347,8 @@
#size-cells = <0>;
reg = <0x0 0x2180000 0x0 0x10000>;
interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 3>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
status = "disabled";
};
@@ -351,7 +358,8 @@
#size-cells = <0>;
reg = <0x0 0x2190000 0x0 0x10000>;
interrupts = <0 57 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 3>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
status = "disabled";
};
@@ -362,7 +370,8 @@
reg = <0x0 0x2100000 0x0 0x10000>;
interrupts = <0 64 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "dspi";
- clocks = <&clockgen 4 0>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(1)>;
spi-num-chipselects = <5>;
big-endian;
status = "disabled";
@@ -372,7 +381,8 @@
compatible = "fsl,ns16550", "ns16550a";
reg = <0x00 0x21c0500 0x0 0x100>;
interrupts = <0 54 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 0>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(1)>;
status = "disabled";
};
@@ -380,7 +390,8 @@
compatible = "fsl,ns16550", "ns16550a";
reg = <0x00 0x21c0600 0x0 0x100>;
interrupts = <0 54 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 0>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(1)>;
status = "disabled";
};
@@ -409,7 +420,7 @@
"fsl,imx21-wdt";
reg = <0x0 0x2ad0000 0x0 0x10000>;
interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 0>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(1)>;
big-endian;
};
@@ -418,8 +429,14 @@
compatible = "fsl,vf610-sai";
reg = <0x0 0x2b50000 0x0 0x10000>;
interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 3>, <&clockgen 4 3>,
- <&clockgen 4 3>, <&clockgen 4 3>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
clock-names = "bus", "mclk1", "mclk2", "mclk3";
dma-names = "tx", "rx";
dmas = <&edma0 1 47>,
@@ -432,8 +449,14 @@
compatible = "fsl,vf610-sai";
reg = <0x0 0x2b60000 0x0 0x10000>;
interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 3>, <&clockgen 4 3>,
- <&clockgen 4 3>, <&clockgen 4 3>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
clock-names = "bus", "mclk1", "mclk2", "mclk3";
dma-names = "tx", "rx";
dmas = <&edma0 1 45>,
@@ -453,8 +476,10 @@
dma-channels = <32>;
big-endian;
clock-names = "dmamux0", "dmamux1";
- clocks = <&clockgen 4 3>,
- <&clockgen 4 3>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
};
usb0: usb@2f00000 {
@@ -473,7 +498,8 @@
<0x0 0x20140520 0x0 0x4>;
reg-names = "ahci", "sata-ecc";
interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 0>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(1)>;
dma-coherent;
status = "disabled";
};
--
2.20.1
next prev parent reply other threads:[~2020-12-29 11:49 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-29 11:47 [PATCH 0/7] arm64: dts: fsl: use the new clockgen constants Michael Walle
2020-12-29 11:47 ` Michael Walle [this message]
2020-12-29 11:47 ` [PATCH 2/7] arm64: dts: ls1028a: use constants in the clockgen phandle Michael Walle
2020-12-29 11:47 ` [PATCH 3/7] arm64: dts: ls1043a: " Michael Walle
2020-12-29 11:47 ` [PATCH 4/7] arm64: dts: ls1046a: " Michael Walle
2020-12-29 11:47 ` [PATCH 5/7] arm64: dts: ls1088a: " Michael Walle
2020-12-29 11:47 ` [PATCH 6/7] arm64: dts: ls208xa: " Michael Walle
2020-12-29 11:47 ` [PATCH 7/7] arm64: dts: lx2160a: " Michael Walle
2021-01-11 1:20 ` [PATCH 0/7] arm64: dts: fsl: use the new clockgen constants Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201229114740.7936-2-michael@walle.cc \
--to=michael@walle.cc \
--cc=devicetree@vger.kernel.org \
--cc=leoyang.li@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).