From: Michael Walle <michael@walle.cc>
To: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Cc: Shawn Guo <shawnguo@kernel.org>, Li Yang <leoyang.li@nxp.com>,
Rob Herring <robh+dt@kernel.org>,
Michael Walle <michael@walle.cc>
Subject: [PATCH 4/7] arm64: dts: ls1046a: use constants in the clockgen phandle
Date: Tue, 29 Dec 2020 12:47:37 +0100 [thread overview]
Message-ID: <20201229114740.7936-5-michael@walle.cc> (raw)
In-Reply-To: <20201229114740.7936-1-michael@walle.cc>
Now that we have constants, use them. This is just a mechanical change.
Signed-off-by: Michael Walle <michael@walle.cc>
---
.../arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 73 ++++++++++++-------
1 file changed, 48 insertions(+), 25 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
index 025e1f587662..bfad3efafda2 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
@@ -8,6 +8,7 @@
* Mingkai Hu <mingkai.hu@nxp.com>
*/
+#include <dt-bindings/clock/fsl,qoriq-clockgen.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/thermal/thermal.h>
@@ -39,7 +40,7 @@
device_type = "cpu";
compatible = "arm,cortex-a72";
reg = <0x0>;
- clocks = <&clockgen 1 0>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 0>;
next-level-cache = <&l2>;
cpu-idle-states = <&CPU_PH20>;
#cooling-cells = <2>;
@@ -49,7 +50,7 @@
device_type = "cpu";
compatible = "arm,cortex-a72";
reg = <0x1>;
- clocks = <&clockgen 1 0>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 0>;
next-level-cache = <&l2>;
cpu-idle-states = <&CPU_PH20>;
#cooling-cells = <2>;
@@ -59,7 +60,7 @@
device_type = "cpu";
compatible = "arm,cortex-a72";
reg = <0x2>;
- clocks = <&clockgen 1 0>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 0>;
next-level-cache = <&l2>;
cpu-idle-states = <&CPU_PH20>;
#cooling-cells = <2>;
@@ -69,7 +70,7 @@
device_type = "cpu";
compatible = "arm,cortex-a72";
reg = <0x3>;
- clocks = <&clockgen 1 0>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 0>;
next-level-cache = <&l2>;
cpu-idle-states = <&CPU_PH20>;
#cooling-cells = <2>;
@@ -295,7 +296,10 @@
reg-names = "QuadSPI", "QuadSPI-memory";
interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "qspi_en", "qspi";
- clocks = <&clockgen 4 1>, <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
status = "disabled";
};
@@ -303,7 +307,7 @@
compatible = "fsl,ls1046a-esdhc", "fsl,esdhc";
reg = <0x0 0x1560000 0x0 0x10000>;
interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 2 1>;
+ clocks = <&clockgen QORIQ_CLK_HWACCEL 1>;
voltage-ranges = <1800 1800 3300 3300>;
sdhci,auto-cmd12;
big-endian;
@@ -454,7 +458,8 @@
reg = <0x0 0x2100000 0x0 0x10000>;
interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "dspi";
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
spi-num-chipselects = <5>;
big-endian;
status = "disabled";
@@ -466,7 +471,8 @@
#size-cells = <0>;
reg = <0x0 0x2180000 0x0 0x10000>;
interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
dmas = <&edma0 1 39>,
<&edma0 1 38>;
dma-names = "tx", "rx";
@@ -479,7 +485,8 @@
#size-cells = <0>;
reg = <0x0 0x2190000 0x0 0x10000>;
interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
status = "disabled";
};
@@ -489,7 +496,8 @@
#size-cells = <0>;
reg = <0x0 0x21a0000 0x0 0x10000>;
interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
status = "disabled";
};
@@ -499,7 +507,8 @@
#size-cells = <0>;
reg = <0x0 0x21b0000 0x0 0x10000>;
interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
status = "disabled";
};
@@ -507,7 +516,8 @@
compatible = "fsl,ns16550", "ns16550a";
reg = <0x00 0x21c0500 0x0 0x100>;
interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
status = "disabled";
};
@@ -515,7 +525,8 @@
compatible = "fsl,ns16550", "ns16550a";
reg = <0x00 0x21c0600 0x0 0x100>;
interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
status = "disabled";
};
@@ -523,7 +534,8 @@
compatible = "fsl,ns16550", "ns16550a";
reg = <0x0 0x21d0500 0x0 0x100>;
interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
status = "disabled";
};
@@ -531,7 +543,8 @@
compatible = "fsl,ns16550", "ns16550a";
reg = <0x0 0x21d0600 0x0 0x100>;
interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
status = "disabled";
};
@@ -579,7 +592,8 @@
compatible = "fsl,ls1021a-lpuart";
reg = <0x0 0x2950000 0x0 0x1000>;
interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 0>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(1)>;
clock-names = "ipg";
status = "disabled";
};
@@ -588,7 +602,8 @@
compatible = "fsl,ls1021a-lpuart";
reg = <0x0 0x2960000 0x0 0x1000>;
interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
clock-names = "ipg";
status = "disabled";
};
@@ -597,7 +612,8 @@
compatible = "fsl,ls1021a-lpuart";
reg = <0x0 0x2970000 0x0 0x1000>;
interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
clock-names = "ipg";
status = "disabled";
};
@@ -606,7 +622,8 @@
compatible = "fsl,ls1021a-lpuart";
reg = <0x0 0x2980000 0x0 0x1000>;
interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
clock-names = "ipg";
status = "disabled";
};
@@ -615,7 +632,8 @@
compatible = "fsl,ls1021a-lpuart";
reg = <0x0 0x2990000 0x0 0x1000>;
interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
clock-names = "ipg";
status = "disabled";
};
@@ -624,7 +642,8 @@
compatible = "fsl,ls1021a-lpuart";
reg = <0x0 0x29a0000 0x0 0x1000>;
interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
clock-names = "ipg";
status = "disabled";
};
@@ -633,7 +652,8 @@
compatible = "fsl,imx21-wdt";
reg = <0x0 0x2ad0000 0x0 0x10000>;
interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
big-endian;
};
@@ -649,8 +669,10 @@
dma-channels = <32>;
big-endian;
clock-names = "dmamux0", "dmamux1";
- clocks = <&clockgen 4 1>,
- <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
};
usb0: usb@2f00000 {
@@ -689,7 +711,8 @@
<0x0 0x20140520 0x0 0x4>;
reg-names = "ahci", "sata-ecc";
interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
};
msi1: msi-controller@1580000 {
--
2.20.1
next prev parent reply other threads:[~2020-12-29 11:49 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-12-29 11:47 [PATCH 0/7] arm64: dts: fsl: use the new clockgen constants Michael Walle
2020-12-29 11:47 ` [PATCH 1/7] arm64: dts: ls1012a: use constants in the clockgen phandle Michael Walle
2020-12-29 11:47 ` [PATCH 2/7] arm64: dts: ls1028a: " Michael Walle
2020-12-29 11:47 ` [PATCH 3/7] arm64: dts: ls1043a: " Michael Walle
2020-12-29 11:47 ` Michael Walle [this message]
2020-12-29 11:47 ` [PATCH 5/7] arm64: dts: ls1088a: " Michael Walle
2020-12-29 11:47 ` [PATCH 6/7] arm64: dts: ls208xa: " Michael Walle
2020-12-29 11:47 ` [PATCH 7/7] arm64: dts: lx2160a: " Michael Walle
2021-01-11 1:20 ` [PATCH 0/7] arm64: dts: fsl: use the new clockgen constants Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201229114740.7936-5-michael@walle.cc \
--to=michael@walle.cc \
--cc=devicetree@vger.kernel.org \
--cc=leoyang.li@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).