From: Tony Lindgren <tony@atomide.com>
To: linux-omap@vger.kernel.org
Cc: "Benoît Cousson" <bcousson@baylibre.com>, devicetree@vger.kernel.org
Subject: [PATCH] ARM: dts: omap4-droid4: Fix lost keypad slide interrupts for droid4
Date: Wed, 30 Dec 2020 17:07:40 +0200 [thread overview]
Message-ID: <20201230150740.53528-1-tony@atomide.com> (raw)
We may lose edge interrupts for gpio banks other than the first gpio
bank as they are not always powered. Instead, we must use the padconf
interrupt as that is always powered.
Note that we still also use the gpio for reading the pin state as that
can't be done with the padconf device.
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
arch/arm/boot/dts/omap4-droid4-xt894.dts | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/arm/boot/dts/omap4-droid4-xt894.dts b/arch/arm/boot/dts/omap4-droid4-xt894.dts
--- a/arch/arm/boot/dts/omap4-droid4-xt894.dts
+++ b/arch/arm/boot/dts/omap4-droid4-xt894.dts
@@ -16,8 +16,13 @@ volume_down {
debounce-interval = <10>;
};
+ /*
+ * We use pad 0x4a100116 abe_dmic_din3.gpio_122 as the irq instead
+ * of the gpio interrupt to avoid lost events in deeper idle states.
+ */
slider {
label = "Keypad Slide";
+ interrupts-extended = <&omap4_pmx_core 0xd6>;
gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>; /* gpio122 */
linux,input-type = <EV_SW>;
linux,code = <SW_KEYPAD_SLIDE>;
--
2.29.2
reply other threads:[~2020-12-30 15:08 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201230150740.53528-1-tony@atomide.com \
--to=tony@atomide.com \
--cc=bcousson@baylibre.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).