From: "Alice Guo (OSS)" <alice.guo@oss.nxp.com>
To: robh+dt@kernel.org, shawnguo@kernel.org, s.hauer@pengutronix.de,
kernel@pengutronix.de, festevam@gmail.com, krzk@kernel.org
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, linux-imx@nxp.com
Subject: [PATCH v10 4/4] soc: imx8m: change to use platform driver
Date: Mon, 4 Jan 2021 17:15:44 +0800 [thread overview]
Message-ID: <20210104091544.13972-4-alice.guo@oss.nxp.com> (raw)
In-Reply-To: <20210104091544.13972-1-alice.guo@oss.nxp.com>
From: Alice Guo <alice.guo@nxp.com>
Directly reading ocotp register depends on that bootloader enables ocotp
clk, which is not always effective, so change to use nvmem API. Using
nvmem API requires to support driver defer probe and thus change
soc-imx8m.c to use platform driver.
The other reason is that directly reading ocotp register causes kexec
kernel hang because the 1st kernel running will disable unused clks
after kernel boots up, and then ocotp clk will be disabled even if
bootloader enables it. When kexec kernel, ocotp clk needs to be enabled
before reading ocotp registers, and nvmem API with platform driver
supported can accomplish this.
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Alice Guo <alice.guo@nxp.com>
---
Changes for v10:
- do not initialize ret to 0
- return imx8_soc_info(NULL) directly
Changes for v9:
- re-add Reviewed-by because it was lost in v8
Changes for v8:
- lost Reviewed-by carelessly
Changes for v7:
- solve the problem "drivers/soc/imx/soc-imx8m.c:174:34: warning:
unused variable"
Changes for v6:
- leave only the changelog under '---'
Changes for v5:
- add cleanup part "of_node_put"
- add note to explain that why device_initcall still exists
Changes for v4:
- delete "__maybe_unused"
- delete MODULE_DEVICE_TABLE(of, imx8m_soc_match);
- rename match table
"fsl,imx8m*"is actually a machine compabile and "fsl,imx8m*-soc" is a
compabile of soc@0
- delete "flag" and change to determine whether the pointer is NULL
- ues of_find_matching_node_and_match()
- delete of_match_ptr()
Changes for v3:
- keep the original way which uses device_initcall to read soc unique
ID
- add the other way which uses module_platform_driver and nvmem API, so
that it will not break the old version DTBs
Changes for v2:
- remove the subject prefix "LF-2571-4"
drivers/soc/imx/soc-imx8m.c | 84 +++++++++++++++++++++++++++++++------
1 file changed, 72 insertions(+), 12 deletions(-)
diff --git a/drivers/soc/imx/soc-imx8m.c b/drivers/soc/imx/soc-imx8m.c
index cc57a384d74d..071e14496e4b 100644
--- a/drivers/soc/imx/soc-imx8m.c
+++ b/drivers/soc/imx/soc-imx8m.c
@@ -5,6 +5,8 @@
#include <linux/init.h>
#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/nvmem-consumer.h>
#include <linux/of_address.h>
#include <linux/slab.h>
#include <linux/sys_soc.h>
@@ -29,7 +31,7 @@
struct imx8_soc_data {
char *name;
- u32 (*soc_revision)(void);
+ u32 (*soc_revision)(struct device *dev);
};
static u64 soc_uid;
@@ -50,7 +52,7 @@ static u32 imx8mq_soc_revision_from_atf(void)
static inline u32 imx8mq_soc_revision_from_atf(void) { return 0; };
#endif
-static u32 __init imx8mq_soc_revision(void)
+static u32 __init imx8mq_soc_revision(struct device *dev)
{
struct device_node *np;
void __iomem *ocotp_base;
@@ -75,9 +77,20 @@ static u32 __init imx8mq_soc_revision(void)
rev = REV_B1;
}
- soc_uid = readl_relaxed(ocotp_base + OCOTP_UID_HIGH);
- soc_uid <<= 32;
- soc_uid |= readl_relaxed(ocotp_base + OCOTP_UID_LOW);
+ if (dev) {
+ int ret;
+
+ ret = nvmem_cell_read_u64(dev, "soc_unique_id", &soc_uid);
+ if (ret) {
+ iounmap(ocotp_base);
+ of_node_put(np);
+ return ret;
+ }
+ } else {
+ soc_uid = readl_relaxed(ocotp_base + OCOTP_UID_HIGH);
+ soc_uid <<= 32;
+ soc_uid |= readl_relaxed(ocotp_base + OCOTP_UID_LOW);
+ }
iounmap(ocotp_base);
of_node_put(np);
@@ -107,7 +120,7 @@ static void __init imx8mm_soc_uid(void)
of_node_put(np);
}
-static u32 __init imx8mm_soc_revision(void)
+static u32 __init imx8mm_soc_revision(struct device *dev)
{
struct device_node *np;
void __iomem *anatop_base;
@@ -125,7 +138,15 @@ static u32 __init imx8mm_soc_revision(void)
iounmap(anatop_base);
of_node_put(np);
- imx8mm_soc_uid();
+ if (dev) {
+ int ret;
+
+ ret = nvmem_cell_read_u64(dev, "soc_unique_id", &soc_uid);
+ if (ret)
+ return ret;
+ } else {
+ imx8mm_soc_uid();
+ }
return rev;
}
@@ -150,7 +171,7 @@ static const struct imx8_soc_data imx8mp_soc_data = {
.soc_revision = imx8mm_soc_revision,
};
-static __maybe_unused const struct of_device_id imx8_soc_match[] = {
+static __maybe_unused const struct of_device_id imx8_machine_match[] = {
{ .compatible = "fsl,imx8mq", .data = &imx8mq_soc_data, },
{ .compatible = "fsl,imx8mm", .data = &imx8mm_soc_data, },
{ .compatible = "fsl,imx8mn", .data = &imx8mn_soc_data, },
@@ -158,12 +179,20 @@ static __maybe_unused const struct of_device_id imx8_soc_match[] = {
{ }
};
+static __maybe_unused const struct of_device_id imx8_soc_match[] = {
+ { .compatible = "fsl,imx8mq-soc", .data = &imx8mq_soc_data, },
+ { .compatible = "fsl,imx8mm-soc", .data = &imx8mm_soc_data, },
+ { .compatible = "fsl,imx8mn-soc", .data = &imx8mn_soc_data, },
+ { .compatible = "fsl,imx8mp-soc", .data = &imx8mp_soc_data, },
+ { }
+};
+
#define imx8_revision(soc_rev) \
soc_rev ? \
kasprintf(GFP_KERNEL, "%d.%d", (soc_rev >> 4) & 0xf, soc_rev & 0xf) : \
"unknown"
-static int __init imx8_soc_init(void)
+static int imx8_soc_info(struct platform_device *pdev)
{
struct soc_device_attribute *soc_dev_attr;
struct soc_device *soc_dev;
@@ -182,7 +211,10 @@ static int __init imx8_soc_init(void)
if (ret)
goto free_soc;
- id = of_match_node(imx8_soc_match, of_root);
+ if (pdev)
+ id = of_match_node(imx8_soc_match, pdev->dev.of_node);
+ else
+ id = of_match_node(imx8_machine_match, of_root);
if (!id) {
ret = -ENODEV;
goto free_soc;
@@ -191,8 +223,16 @@ static int __init imx8_soc_init(void)
data = id->data;
if (data) {
soc_dev_attr->soc_id = data->name;
- if (data->soc_revision)
- soc_rev = data->soc_revision();
+ if (data->soc_revision) {
+ if (pdev) {
+ soc_rev = data->soc_revision(&pdev->dev);
+ ret = soc_rev;
+ if (ret < 0)
+ goto free_soc;
+ } else {
+ soc_rev = data->soc_revision(NULL);
+ }
+ }
}
soc_dev_attr->revision = imx8_revision(soc_rev);
@@ -230,4 +270,24 @@ static int __init imx8_soc_init(void)
kfree(soc_dev_attr);
return ret;
}
+
+/* Retain device_initcall is for backward compatibility with DTS. */
+static int __init imx8_soc_init(void)
+{
+ if (of_find_matching_node_and_match(NULL, imx8_soc_match, NULL))
+ return 0;
+
+ return imx8_soc_info(NULL);
+}
device_initcall(imx8_soc_init);
+
+static struct platform_driver imx8_soc_info_driver = {
+ .probe = imx8_soc_info,
+ .driver = {
+ .name = "imx8_soc_info",
+ .of_match_table = imx8_soc_match,
+ },
+};
+
+module_platform_driver(imx8_soc_info_driver);
+MODULE_LICENSE("GPL v2");
--
2.17.1
next prev parent reply other threads:[~2021-01-04 9:17 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-01-04 9:15 [PATCH v10 1/4] dt-bindings: soc: imx8m: add DT Binding doc for soc unique ID Alice Guo (OSS)
2021-01-04 9:15 ` [PATCH v10 2/4] arm64: dts: imx8m: add SoC ID compatible Alice Guo (OSS)
2021-01-04 9:15 ` [PATCH v10 3/4] arm64: dts: imx8m: add NVMEM provider and consumer to read soc unique ID Alice Guo (OSS)
2021-01-04 9:15 ` Alice Guo (OSS) [this message]
2021-03-09 13:42 ` [PATCH] arm64: dts: imx8mq: remove SoC ID compatible Martin Kepplinger
2021-03-09 20:56 ` Krzysztof Kozlowski
2021-01-11 2:46 ` [PATCH v10 1/4] dt-bindings: soc: imx8m: add DT Binding doc for soc unique ID Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210104091544.13972-4-alice.guo@oss.nxp.com \
--to=alice.guo@oss.nxp.com \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=krzk@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).