From: Krzysztof Kozlowski <krzk@kernel.org>
To: Tim Harvey <tharvey@gateworks.com>
Cc: Rob Herring <robh+dt@kernel.org>, Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>,
NXP Linux Team <linux-imx@nxp.com>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v5 2/2] arm64: dts: imx8mm: Add Gateworks i.MX 8M Mini Development Kits
Date: Mon, 4 Jan 2021 18:57:53 +0100 [thread overview]
Message-ID: <20210104175753.GA25954@kozik-lap> (raw)
In-Reply-To: <1609781807-15096-2-git-send-email-tharvey@gateworks.com>
On Mon, Jan 04, 2021 at 09:36:47AM -0800, Tim Harvey wrote:
> The Gateworks Venice GW71xx-0x/GW72xx-0x/GW73xx-0x are development
> kits consisting of a GW700x SoM and a Baseboard. Future SoM's such
> as the GW701x will create additional combinations.
>
> The GW700x SoM contains:
> - i.MX 8M Mini SoC
> - LPDDR4 DRAM
> - eMMC FLASH
> - Gateworks System Controller (eeprom/pushbutton/reset/voltage-monitor)
> - GbE PHY connected to the i.MX 8M Mini FEC
> - Power Management IC
>
> The GW71xx Baseboard contains:
> - 1x MiniPCIe Socket with USB2.0, PCIe, and SIM
> - 1x RJ45 GbE (i.MX 8M Mini FEC)
> - I/O connector with 1x-SPI/1x-I2C/1x-UART/4x-GPIO signals
> - PCIe Clock generator
> - GPS and accelerometer
> - 1x USB 2.0 Front Panel connector
> - wide range power supply
>
> The GW72xx Baseboard contains:
> - 2x MiniPCIe Socket with USB2.0, PCIe, and SIM
> - 2x RJ45 GbE (i.MX 8M Mini FEC and LAN743x)
> - 1x MicroSD connector
> - 1x USB 2.0 Front Panel connector
> - 1x SPI connector
> - 1x Serial connector supporting 2x-UART or 1x-UART configured as 1 of:
> RS232 w/ flow-control, RS485, RS422
> - PCIe Clock generator
> - GPS and accelerometer
> - Media Expansion connector (MIPI-CSI/MIPI-DSI/GPIO/I2S)
> - I/O connector with 2x-ADC,2x-GPIO,1x-UART,1x-I2C
> - wide range power supply
>
> The GW73xx Baseboard contains:
> - 3x MiniPCIe Socket with USB2.0, PCIe, and SIM
> - 2x RJ45 GbE (i.MX 8M Mini FEC and LAN743x)
> - 1x MicroSD connector
> - 1x USB 2.0 Front Panel connector
> - 1x SPI connector
> - 1x Serial connector supporting 2x-UART or 1x-UART configured as 1 of:
> RS232 w/ flow-control, RS485, RS422
> - WiFi/BT
> - PCIe Clock generator
> - GPS and accelerometer
> - Media Expansion connector (MIPI-CSI/MIPI-DSI/GPIO/I2S)
> - I/O connector with 2x-ADC,2x-GPIO,1x-UART,1x-I2C
> - wide range power supply
>
> Signed-off-by: Tim Harvey <tharvey@gateworks.com>
> ---
> v5:
> - fixed typo/grammar in commit log (s/controll/control s/comprised/consisting/)
> - removed underscore from remaining node names
> - removed blank line in hoggrp
> - removed unused assigned-clocks and assigned-clock-rates node from usdhc nodes
>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Best regards,
Krzysztof
next prev parent reply other threads:[~2021-01-04 17:58 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-01-04 17:36 [PATCH v5 1/2] dt-bindings: arm: fsl: Add binding for Gateworks boards with IMX8MM Tim Harvey
2021-01-04 17:36 ` [PATCH v5 2/2] arm64: dts: imx8mm: Add Gateworks i.MX 8M Mini Development Kits Tim Harvey
2021-01-04 17:57 ` Krzysztof Kozlowski [this message]
2021-01-11 3:29 ` [PATCH v5 1/2] dt-bindings: arm: fsl: Add binding for Gateworks boards with IMX8MM Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210104175753.GA25954@kozik-lap \
--to=krzk@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
--cc=tharvey@gateworks.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).