* [PATCH 1/7] arm64: dts: ls1012a: use constants in the clockgen phandle
2020-12-29 11:47 [PATCH 0/7] arm64: dts: fsl: use the new clockgen constants Michael Walle
@ 2020-12-29 11:47 ` Michael Walle
2020-12-29 11:47 ` [PATCH 2/7] arm64: dts: ls1028a: " Michael Walle
` (6 subsequent siblings)
7 siblings, 0 replies; 9+ messages in thread
From: Michael Walle @ 2020-12-29 11:47 UTC (permalink / raw)
To: linux-arm-kernel, devicetree, linux-kernel
Cc: Shawn Guo, Li Yang, Rob Herring, Michael Walle
Now that we have constants, use them. This is just a mechanical change.
Signed-off-by: Michael Walle <michael@walle.cc>
---
.../arm64/boot/dts/freescale/fsl-ls1012a.dtsi | 60 +++++++++++++------
1 file changed, 43 insertions(+), 17 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
index 626b709d1fb9..7de6b376d792 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
@@ -7,6 +7,7 @@
*
*/
+#include <dt-bindings/clock/fsl,qoriq-clockgen.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/thermal/thermal.h>
@@ -34,7 +35,7 @@
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x0>;
- clocks = <&clockgen 1 0>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 0>;
#cooling-cells = <2>;
cpu-idle-states = <&CPU_PH20>;
};
@@ -148,7 +149,10 @@
reg-names = "QuadSPI", "QuadSPI-memory";
interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "qspi_en", "qspi";
- clocks = <&clockgen 4 0>, <&clockgen 4 0>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(1)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(1)>;
status = "disabled";
};
@@ -156,7 +160,8 @@
compatible = "fsl,ls1012a-esdhc", "fsl,esdhc";
reg = <0x0 0x1560000 0x0 0x10000>;
interrupts = <0 62 0x4>;
- clocks = <&clockgen 4 0>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(1)>;
voltage-ranges = <1800 1800 3300 3300>;
sdhci,auto-cmd12;
big-endian;
@@ -174,7 +179,8 @@
compatible = "fsl,ls1012a-esdhc", "fsl,esdhc";
reg = <0x0 0x1580000 0x0 0x10000>;
interrupts = <0 65 0x4>;
- clocks = <&clockgen 4 0>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(1)>;
voltage-ranges = <1800 1800 3300 3300>;
sdhci,auto-cmd12;
big-endian;
@@ -341,7 +347,8 @@
#size-cells = <0>;
reg = <0x0 0x2180000 0x0 0x10000>;
interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 3>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
status = "disabled";
};
@@ -351,7 +358,8 @@
#size-cells = <0>;
reg = <0x0 0x2190000 0x0 0x10000>;
interrupts = <0 57 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 3>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
status = "disabled";
};
@@ -362,7 +370,8 @@
reg = <0x0 0x2100000 0x0 0x10000>;
interrupts = <0 64 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "dspi";
- clocks = <&clockgen 4 0>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(1)>;
spi-num-chipselects = <5>;
big-endian;
status = "disabled";
@@ -372,7 +381,8 @@
compatible = "fsl,ns16550", "ns16550a";
reg = <0x00 0x21c0500 0x0 0x100>;
interrupts = <0 54 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 0>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(1)>;
status = "disabled";
};
@@ -380,7 +390,8 @@
compatible = "fsl,ns16550", "ns16550a";
reg = <0x00 0x21c0600 0x0 0x100>;
interrupts = <0 54 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 0>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(1)>;
status = "disabled";
};
@@ -409,7 +420,7 @@
"fsl,imx21-wdt";
reg = <0x0 0x2ad0000 0x0 0x10000>;
interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 0>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(1)>;
big-endian;
};
@@ -418,8 +429,14 @@
compatible = "fsl,vf610-sai";
reg = <0x0 0x2b50000 0x0 0x10000>;
interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 3>, <&clockgen 4 3>,
- <&clockgen 4 3>, <&clockgen 4 3>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
clock-names = "bus", "mclk1", "mclk2", "mclk3";
dma-names = "tx", "rx";
dmas = <&edma0 1 47>,
@@ -432,8 +449,14 @@
compatible = "fsl,vf610-sai";
reg = <0x0 0x2b60000 0x0 0x10000>;
interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 3>, <&clockgen 4 3>,
- <&clockgen 4 3>, <&clockgen 4 3>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
clock-names = "bus", "mclk1", "mclk2", "mclk3";
dma-names = "tx", "rx";
dmas = <&edma0 1 45>,
@@ -453,8 +476,10 @@
dma-channels = <32>;
big-endian;
clock-names = "dmamux0", "dmamux1";
- clocks = <&clockgen 4 3>,
- <&clockgen 4 3>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
};
usb0: usb@2f00000 {
@@ -473,7 +498,8 @@
<0x0 0x20140520 0x0 0x4>;
reg-names = "ahci", "sata-ecc";
interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 0>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(1)>;
dma-coherent;
status = "disabled";
};
--
2.20.1
^ permalink raw reply related [flat|nested] 9+ messages in thread* [PATCH 2/7] arm64: dts: ls1028a: use constants in the clockgen phandle
2020-12-29 11:47 [PATCH 0/7] arm64: dts: fsl: use the new clockgen constants Michael Walle
2020-12-29 11:47 ` [PATCH 1/7] arm64: dts: ls1012a: use constants in the clockgen phandle Michael Walle
@ 2020-12-29 11:47 ` Michael Walle
2020-12-29 11:47 ` [PATCH 3/7] arm64: dts: ls1043a: " Michael Walle
` (5 subsequent siblings)
7 siblings, 0 replies; 9+ messages in thread
From: Michael Walle @ 2020-12-29 11:47 UTC (permalink / raw)
To: linux-arm-kernel, devicetree, linux-kernel
Cc: Shawn Guo, Li Yang, Rob Herring, Michael Walle
Now that we have constants, use them. This is just a mechanical change.
Signed-off-by: Michael Walle <michael@walle.cc>
---
.../fsl-ls1028a-kontron-sl28-var3-ads2.dts | 5 +-
.../arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 162 +++++++++++++-----
2 files changed, 120 insertions(+), 47 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts
index c45d7b40e374..ed4e69e87e30 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts
@@ -8,6 +8,8 @@
*/
/dts-v1/;
+
+#include <dt-bindings/clock/fsl,qoriq-clockgen.h>
#include "fsl-ls1028a-kontron-sl28.dts"
/ {
@@ -120,7 +122,8 @@
mclk: clock-mclk@f130080 {
compatible = "fsl,vf610-sai-clock";
reg = <0x0 0xf130080 0x0 0x80>;
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
#clock-cells = <0>;
};
};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
index 5872ccb3772a..0c05aa8a998c 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
@@ -8,6 +8,7 @@
*
*/
+#include <dt-bindings/clock/fsl,qoriq-clockgen.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/thermal/thermal.h>
@@ -30,7 +31,7 @@
compatible = "arm,cortex-a72";
reg = <0x0>;
enable-method = "psci";
- clocks = <&clockgen 1 0>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 0>;
next-level-cache = <&l2>;
cpu-idle-states = <&CPU_PW20>;
#cooling-cells = <2>;
@@ -41,7 +42,7 @@
compatible = "arm,cortex-a72";
reg = <0x1>;
enable-method = "psci";
- clocks = <&clockgen 1 0>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 0>;
next-level-cache = <&l2>;
cpu-idle-states = <&CPU_PW20>;
#cooling-cells = <2>;
@@ -235,7 +236,8 @@
#size-cells = <0>;
reg = <0x0 0x2000000 0x0 0x10000>;
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 3>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
status = "disabled";
};
@@ -245,7 +247,8 @@
#size-cells = <0>;
reg = <0x0 0x2010000 0x0 0x10000>;
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 3>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
status = "disabled";
};
@@ -255,7 +258,8 @@
#size-cells = <0>;
reg = <0x0 0x2020000 0x0 0x10000>;
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 3>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
status = "disabled";
};
@@ -265,7 +269,8 @@
#size-cells = <0>;
reg = <0x0 0x2030000 0x0 0x10000>;
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 3>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
status = "disabled";
};
@@ -275,7 +280,8 @@
#size-cells = <0>;
reg = <0x0 0x2040000 0x0 0x10000>;
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 3>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
status = "disabled";
};
@@ -285,7 +291,8 @@
#size-cells = <0>;
reg = <0x0 0x2050000 0x0 0x10000>;
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 3>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
status = "disabled";
};
@@ -295,7 +302,8 @@
#size-cells = <0>;
reg = <0x0 0x2060000 0x0 0x10000>;
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 3>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
status = "disabled";
};
@@ -305,7 +313,8 @@
#size-cells = <0>;
reg = <0x0 0x2070000 0x0 0x10000>;
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 3>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
status = "disabled";
};
@@ -317,7 +326,8 @@
<0x0 0x20000000 0x0 0x10000000>;
reg-names = "fspi_base", "fspi_mmap";
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 2 0>, <&clockgen 2 0>;
+ clocks = <&clockgen QORIQ_CLK_HWACCEL 0>,
+ <&clockgen QORIQ_CLK_HWACCEL 0>;
clock-names = "fspi_en", "fspi";
status = "disabled";
};
@@ -329,7 +339,8 @@
reg = <0x0 0x2100000 0x0 0x10000>;
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "dspi";
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
dmas = <&edma0 0 62>, <&edma0 0 60>;
dma-names = "tx", "rx";
spi-num-chipselects = <4>;
@@ -344,7 +355,8 @@
reg = <0x0 0x2110000 0x0 0x10000>;
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "dspi";
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
dmas = <&edma0 0 58>, <&edma0 0 56>;
dma-names = "tx", "rx";
spi-num-chipselects = <4>;
@@ -359,7 +371,8 @@
reg = <0x0 0x2120000 0x0 0x10000>;
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "dspi";
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
dmas = <&edma0 0 54>, <&edma0 0 2>;
dma-names = "tx", "rx";
spi-num-chipselects = <3>;
@@ -372,7 +385,7 @@
reg = <0x0 0x2140000 0x0 0x10000>;
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <0>; /* fixed up by bootloader */
- clocks = <&clockgen 2 1>;
+ clocks = <&clockgen QORIQ_CLK_HWACCEL 1>;
voltage-ranges = <1800 1800 3300 3300>;
sdhci,auto-cmd12;
little-endian;
@@ -385,7 +398,7 @@
reg = <0x0 0x2150000 0x0 0x10000>;
interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
clock-frequency = <0>; /* fixed up by bootloader */
- clocks = <&clockgen 2 1>;
+ clocks = <&clockgen QORIQ_CLK_HWACCEL 1>;
voltage-ranges = <1800 1800 3300 3300>;
sdhci,auto-cmd12;
broken-cd;
@@ -398,7 +411,8 @@
compatible = "fsl,ls1028ar1-flexcan", "fsl,lx2160ar1-flexcan";
reg = <0x0 0x2180000 0x0 0x10000>;
interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&sysclk>, <&clockgen 4 1>;
+ clocks = <&sysclk>, <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
clock-names = "ipg", "per";
status = "disabled";
};
@@ -407,7 +421,8 @@
compatible = "fsl,ls1028ar1-flexcan", "fsl,lx2160ar1-flexcan";
reg = <0x0 0x2190000 0x0 0x10000>;
interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&sysclk>, <&clockgen 4 1>;
+ clocks = <&sysclk>, <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
clock-names = "ipg", "per";
status = "disabled";
};
@@ -416,7 +431,8 @@
compatible = "fsl,ns16550", "ns16550a";
reg = <0x00 0x21c0500 0x0 0x100>;
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
status = "disabled";
};
@@ -424,7 +440,8 @@
compatible = "fsl,ns16550", "ns16550a";
reg = <0x00 0x21c0600 0x0 0x100>;
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
status = "disabled";
};
@@ -433,7 +450,8 @@
compatible = "fsl,ls1028a-lpuart";
reg = <0x0 0x2260000 0x0 0x1000>;
interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
clock-names = "ipg";
dma-names = "rx","tx";
dmas = <&edma0 1 32>,
@@ -445,7 +463,8 @@
compatible = "fsl,ls1028a-lpuart";
reg = <0x0 0x2270000 0x0 0x1000>;
interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
clock-names = "ipg";
dma-names = "rx","tx";
dmas = <&edma0 1 30>,
@@ -457,7 +476,8 @@
compatible = "fsl,ls1028a-lpuart";
reg = <0x0 0x2280000 0x0 0x1000>;
interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
clock-names = "ipg";
dma-names = "rx","tx";
dmas = <&edma0 1 28>,
@@ -469,7 +489,8 @@
compatible = "fsl,ls1028a-lpuart";
reg = <0x0 0x2290000 0x0 0x1000>;
interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
clock-names = "ipg";
dma-names = "rx","tx";
dmas = <&edma0 1 26>,
@@ -481,7 +502,8 @@
compatible = "fsl,ls1028a-lpuart";
reg = <0x0 0x22a0000 0x0 0x1000>;
interrupts = <GIC_SPI 236 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
clock-names = "ipg";
dma-names = "rx","tx";
dmas = <&edma0 1 24>,
@@ -493,7 +515,8 @@
compatible = "fsl,ls1028a-lpuart";
reg = <0x0 0x22b0000 0x0 0x1000>;
interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
clock-names = "ipg";
dma-names = "rx","tx";
dmas = <&edma0 1 22>,
@@ -512,8 +535,10 @@
interrupt-names = "edma-tx", "edma-err";
dma-channels = <32>;
clock-names = "dmamux0", "dmamux1";
- clocks = <&clockgen 4 1>,
- <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
};
gpio1: gpio@2300000 {
@@ -575,7 +600,8 @@
<0x7 0x100520 0x0 0x4>;
reg-names = "ahci", "sata-ecc";
interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
status = "disabled";
};
@@ -747,14 +773,20 @@
cluster1_core0_watchdog: watchdog@c000000 {
compatible = "arm,sp805", "arm,primecell";
reg = <0x0 0xc000000 0x0 0x1000>;
- clocks = <&clockgen 4 15>, <&clockgen 4 15>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(16)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(16)>;
clock-names = "wdog_clk", "apb_pclk";
};
cluster1_core1_watchdog: watchdog@c010000 {
compatible = "arm,sp805", "arm,primecell";
reg = <0x0 0xc010000 0x0 0x1000>;
- clocks = <&clockgen 4 15>, <&clockgen 4 15>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(16)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(16)>;
clock-names = "wdog_clk", "apb_pclk";
};
@@ -763,8 +795,14 @@
compatible = "fsl,vf610-sai";
reg = <0x0 0xf100000 0x0 0x10000>;
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 1>, <&clockgen 4 1>,
- <&clockgen 4 1>, <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
clock-names = "bus", "mclk1", "mclk2", "mclk3";
dma-names = "tx", "rx";
dmas = <&edma0 1 4>,
@@ -778,8 +816,14 @@
compatible = "fsl,vf610-sai";
reg = <0x0 0xf110000 0x0 0x10000>;
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 1>, <&clockgen 4 1>,
- <&clockgen 4 1>, <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
clock-names = "bus", "mclk1", "mclk2", "mclk3";
dma-names = "tx", "rx";
dmas = <&edma0 1 6>,
@@ -793,8 +837,14 @@
compatible = "fsl,vf610-sai";
reg = <0x0 0xf120000 0x0 0x10000>;
interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 1>, <&clockgen 4 1>,
- <&clockgen 4 1>, <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
clock-names = "bus", "mclk1", "mclk2", "mclk3";
dma-names = "tx", "rx";
dmas = <&edma0 1 8>,
@@ -808,8 +858,14 @@
compatible = "fsl,vf610-sai";
reg = <0x0 0xf130000 0x0 0x10000>;
interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 1>, <&clockgen 4 1>,
- <&clockgen 4 1>, <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
clock-names = "bus", "mclk1", "mclk2", "mclk3";
dma-names = "tx", "rx";
dmas = <&edma0 1 10>,
@@ -823,8 +879,14 @@
compatible = "fsl,vf610-sai";
reg = <0x0 0xf140000 0x0 0x10000>;
interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 1>, <&clockgen 4 1>,
- <&clockgen 4 1>, <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
clock-names = "bus", "mclk1", "mclk2", "mclk3";
dma-names = "tx", "rx";
dmas = <&edma0 1 12>,
@@ -838,8 +900,14 @@
compatible = "fsl,vf610-sai";
reg = <0x0 0xf150000 0x0 0x10000>;
interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 1>, <&clockgen 4 1>,
- <&clockgen 4 1>, <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
clock-names = "bus", "mclk1", "mclk2", "mclk3";
dma-names = "tx", "rx";
dmas = <&edma0 1 14>,
@@ -961,7 +1029,7 @@
ethernet@0,4 {
compatible = "fsl,enetc-ptp";
reg = <0x000400 0 0 0 0>;
- clocks = <&clockgen 2 3>;
+ clocks = <&clockgen QORIQ_CLK_HWACCEL 3>;
little-endian;
fsl,extts-fifo;
};
@@ -1056,8 +1124,10 @@
interrupts = <0 222 IRQ_TYPE_LEVEL_HIGH>,
<0 223 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "DE", "SE";
- clocks = <&dpclk>, <&clockgen 2 2>, <&clockgen 2 2>,
- <&clockgen 2 2>;
+ clocks = <&dpclk>,
+ <&clockgen QORIQ_CLK_HWACCEL 2>,
+ <&clockgen QORIQ_CLK_HWACCEL 2>,
+ <&clockgen QORIQ_CLK_HWACCEL 2>;
clock-names = "pxlclk", "mclk", "aclk", "pclk";
arm,malidp-output-port-lines = /bits/ 8 <8 8 8>;
arm,malidp-arqos-value = <0xd000d000>;
--
2.20.1
^ permalink raw reply related [flat|nested] 9+ messages in thread* [PATCH 3/7] arm64: dts: ls1043a: use constants in the clockgen phandle
2020-12-29 11:47 [PATCH 0/7] arm64: dts: fsl: use the new clockgen constants Michael Walle
2020-12-29 11:47 ` [PATCH 1/7] arm64: dts: ls1012a: use constants in the clockgen phandle Michael Walle
2020-12-29 11:47 ` [PATCH 2/7] arm64: dts: ls1028a: " Michael Walle
@ 2020-12-29 11:47 ` Michael Walle
2020-12-29 11:47 ` [PATCH 4/7] arm64: dts: ls1046a: " Michael Walle
` (4 subsequent siblings)
7 siblings, 0 replies; 9+ messages in thread
From: Michael Walle @ 2020-12-29 11:47 UTC (permalink / raw)
To: linux-arm-kernel, devicetree, linux-kernel
Cc: Shawn Guo, Li Yang, Rob Herring, Michael Walle
Now that we have constants, use them. This is just a mechanical change.
Signed-off-by: Michael Walle <michael@walle.cc>
---
.../arm64/boot/dts/freescale/fsl-ls1043a.dtsi | 73 ++++++++++++-------
.../boot/dts/freescale/qoriq-fman3-0.dtsi | 6 +-
2 files changed, 52 insertions(+), 27 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index bbae4b353d3f..073f17ed634f 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -8,6 +8,7 @@
* Mingkai Hu <Mingkai.hu@freescale.com>
*/
+#include <dt-bindings/clock/fsl,qoriq-clockgen.h>
#include <dt-bindings/thermal/thermal.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -44,7 +45,7 @@
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x0>;
- clocks = <&clockgen 1 0>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 0>;
next-level-cache = <&l2>;
cpu-idle-states = <&CPU_PH20>;
#cooling-cells = <2>;
@@ -54,7 +55,7 @@
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x1>;
- clocks = <&clockgen 1 0>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 0>;
next-level-cache = <&l2>;
cpu-idle-states = <&CPU_PH20>;
#cooling-cells = <2>;
@@ -64,7 +65,7 @@
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x2>;
- clocks = <&clockgen 1 0>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 0>;
next-level-cache = <&l2>;
cpu-idle-states = <&CPU_PH20>;
#cooling-cells = <2>;
@@ -74,7 +75,7 @@
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x3>;
- clocks = <&clockgen 1 0>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 0>;
next-level-cache = <&l2>;
cpu-idle-states = <&CPU_PH20>;
#cooling-cells = <2>;
@@ -377,7 +378,10 @@
reg-names = "QuadSPI", "QuadSPI-memory";
interrupts = <0 99 0x4>;
clock-names = "qspi_en", "qspi";
- clocks = <&clockgen 4 0>, <&clockgen 4 0>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(1)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(1)>;
status = "disabled";
};
@@ -476,7 +480,8 @@
reg = <0x0 0x2100000 0x0 0x10000>;
interrupts = <0 64 0x4>;
clock-names = "dspi";
- clocks = <&clockgen 4 0>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(1)>;
spi-num-chipselects = <5>;
big-endian;
status = "disabled";
@@ -489,7 +494,8 @@
reg = <0x0 0x2110000 0x0 0x10000>;
interrupts = <0 65 0x4>;
clock-names = "dspi";
- clocks = <&clockgen 4 0>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(1)>;
spi-num-chipselects = <5>;
big-endian;
status = "disabled";
@@ -502,7 +508,8 @@
reg = <0x0 0x2180000 0x0 0x10000>;
interrupts = <0 56 0x4>;
clock-names = "i2c";
- clocks = <&clockgen 4 0>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(1)>;
dmas = <&edma0 1 39>,
<&edma0 1 38>;
dma-names = "tx", "rx";
@@ -516,7 +523,8 @@
reg = <0x0 0x2190000 0x0 0x10000>;
interrupts = <0 57 0x4>;
clock-names = "i2c";
- clocks = <&clockgen 4 0>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(1)>;
status = "disabled";
};
@@ -527,7 +535,8 @@
reg = <0x0 0x21a0000 0x0 0x10000>;
interrupts = <0 58 0x4>;
clock-names = "i2c";
- clocks = <&clockgen 4 0>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(1)>;
status = "disabled";
};
@@ -538,7 +547,8 @@
reg = <0x0 0x21b0000 0x0 0x10000>;
interrupts = <0 59 0x4>;
clock-names = "i2c";
- clocks = <&clockgen 4 0>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(1)>;
status = "disabled";
};
@@ -546,28 +556,32 @@
compatible = "fsl,ns16550", "ns16550a";
reg = <0x00 0x21c0500 0x0 0x100>;
interrupts = <0 54 0x4>;
- clocks = <&clockgen 4 0>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(1)>;
};
duart1: serial@21c0600 {
compatible = "fsl,ns16550", "ns16550a";
reg = <0x00 0x21c0600 0x0 0x100>;
interrupts = <0 54 0x4>;
- clocks = <&clockgen 4 0>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(1)>;
};
duart2: serial@21d0500 {
compatible = "fsl,ns16550", "ns16550a";
reg = <0x0 0x21d0500 0x0 0x100>;
interrupts = <0 55 0x4>;
- clocks = <&clockgen 4 0>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(1)>;
};
duart3: serial@21d0600 {
compatible = "fsl,ns16550", "ns16550a";
reg = <0x0 0x21d0600 0x0 0x100>;
interrupts = <0 55 0x4>;
- clocks = <&clockgen 4 0>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(1)>;
};
gpio1: gpio@2300000 {
@@ -679,7 +693,7 @@
compatible = "fsl,ls1021a-lpuart";
reg = <0x0 0x2950000 0x0 0x1000>;
interrupts = <0 48 0x4>;
- clocks = <&clockgen 0 0>;
+ clocks = <&clockgen QORIQ_CLK_SYSCLK 0>;
clock-names = "ipg";
status = "disabled";
};
@@ -688,7 +702,8 @@
compatible = "fsl,ls1021a-lpuart";
reg = <0x0 0x2960000 0x0 0x1000>;
interrupts = <0 49 0x4>;
- clocks = <&clockgen 4 0>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(1)>;
clock-names = "ipg";
status = "disabled";
};
@@ -697,7 +712,8 @@
compatible = "fsl,ls1021a-lpuart";
reg = <0x0 0x2970000 0x0 0x1000>;
interrupts = <0 50 0x4>;
- clocks = <&clockgen 4 0>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(1)>;
clock-names = "ipg";
status = "disabled";
};
@@ -706,7 +722,8 @@
compatible = "fsl,ls1021a-lpuart";
reg = <0x0 0x2980000 0x0 0x1000>;
interrupts = <0 51 0x4>;
- clocks = <&clockgen 4 0>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(1)>;
clock-names = "ipg";
status = "disabled";
};
@@ -715,7 +732,8 @@
compatible = "fsl,ls1021a-lpuart";
reg = <0x0 0x2990000 0x0 0x1000>;
interrupts = <0 52 0x4>;
- clocks = <&clockgen 4 0>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(1)>;
clock-names = "ipg";
status = "disabled";
};
@@ -724,7 +742,8 @@
compatible = "fsl,ls1021a-lpuart";
reg = <0x0 0x29a0000 0x0 0x1000>;
interrupts = <0 53 0x4>;
- clocks = <&clockgen 4 0>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(1)>;
clock-names = "ipg";
status = "disabled";
};
@@ -733,7 +752,8 @@
compatible = "fsl,ls1043a-wdt", "fsl,imx21-wdt";
reg = <0x0 0x2ad0000 0x0 0x10000>;
interrupts = <0 83 0x4>;
- clocks = <&clockgen 4 0>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(1)>;
clock-names = "wdog";
big-endian;
};
@@ -750,8 +770,10 @@
dma-channels = <32>;
big-endian;
clock-names = "dmamux0", "dmamux1";
- clocks = <&clockgen 4 0>,
- <&clockgen 4 0>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(1)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(1)>;
};
usb0: usb@2f00000 {
@@ -793,7 +815,8 @@
<0x0 0x20140520 0x0 0x4>;
reg-names = "ahci", "sata-ecc";
interrupts = <0 69 0x4>;
- clocks = <&clockgen 4 0>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(1)>;
dma-coherent;
};
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi
index 4338db14c5da..ae1c2abaaf36 100644
--- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi
@@ -6,6 +6,8 @@
*
*/
+#include <dt-bindings/clock/fsl,qoriq-clockgen.h>
+
fman0: fman@1a00000 {
#address-cells = <1>;
#size-cells = <1>;
@@ -15,7 +17,7 @@ fman0: fman@1a00000 {
reg = <0x0 0x1a00000 0x0 0xfe000>;
interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 3 0>;
+ clocks = <&clockgen QORIQ_CLK_FMAN 0>;
clock-names = "fmanclk";
fsl,qman-channel-range = <0x800 0x10>;
ptimer-handle = <&ptp_timer0>;
@@ -81,6 +83,6 @@ ptp_timer0: ptp-timer@1afe000 {
compatible = "fsl,fman-ptp-timer";
reg = <0x0 0x1afe000 0x0 0x1000>;
interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 3 0>;
+ clocks = <&clockgen QORIQ_CLK_FMAN 0>;
fsl,extts-fifo;
};
--
2.20.1
^ permalink raw reply related [flat|nested] 9+ messages in thread* [PATCH 4/7] arm64: dts: ls1046a: use constants in the clockgen phandle
2020-12-29 11:47 [PATCH 0/7] arm64: dts: fsl: use the new clockgen constants Michael Walle
` (2 preceding siblings ...)
2020-12-29 11:47 ` [PATCH 3/7] arm64: dts: ls1043a: " Michael Walle
@ 2020-12-29 11:47 ` Michael Walle
2020-12-29 11:47 ` [PATCH 5/7] arm64: dts: ls1088a: " Michael Walle
` (3 subsequent siblings)
7 siblings, 0 replies; 9+ messages in thread
From: Michael Walle @ 2020-12-29 11:47 UTC (permalink / raw)
To: linux-arm-kernel, devicetree, linux-kernel
Cc: Shawn Guo, Li Yang, Rob Herring, Michael Walle
Now that we have constants, use them. This is just a mechanical change.
Signed-off-by: Michael Walle <michael@walle.cc>
---
.../arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 73 ++++++++++++-------
1 file changed, 48 insertions(+), 25 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
index 025e1f587662..bfad3efafda2 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
@@ -8,6 +8,7 @@
* Mingkai Hu <mingkai.hu@nxp.com>
*/
+#include <dt-bindings/clock/fsl,qoriq-clockgen.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/thermal/thermal.h>
@@ -39,7 +40,7 @@
device_type = "cpu";
compatible = "arm,cortex-a72";
reg = <0x0>;
- clocks = <&clockgen 1 0>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 0>;
next-level-cache = <&l2>;
cpu-idle-states = <&CPU_PH20>;
#cooling-cells = <2>;
@@ -49,7 +50,7 @@
device_type = "cpu";
compatible = "arm,cortex-a72";
reg = <0x1>;
- clocks = <&clockgen 1 0>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 0>;
next-level-cache = <&l2>;
cpu-idle-states = <&CPU_PH20>;
#cooling-cells = <2>;
@@ -59,7 +60,7 @@
device_type = "cpu";
compatible = "arm,cortex-a72";
reg = <0x2>;
- clocks = <&clockgen 1 0>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 0>;
next-level-cache = <&l2>;
cpu-idle-states = <&CPU_PH20>;
#cooling-cells = <2>;
@@ -69,7 +70,7 @@
device_type = "cpu";
compatible = "arm,cortex-a72";
reg = <0x3>;
- clocks = <&clockgen 1 0>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 0>;
next-level-cache = <&l2>;
cpu-idle-states = <&CPU_PH20>;
#cooling-cells = <2>;
@@ -295,7 +296,10 @@
reg-names = "QuadSPI", "QuadSPI-memory";
interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "qspi_en", "qspi";
- clocks = <&clockgen 4 1>, <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
status = "disabled";
};
@@ -303,7 +307,7 @@
compatible = "fsl,ls1046a-esdhc", "fsl,esdhc";
reg = <0x0 0x1560000 0x0 0x10000>;
interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 2 1>;
+ clocks = <&clockgen QORIQ_CLK_HWACCEL 1>;
voltage-ranges = <1800 1800 3300 3300>;
sdhci,auto-cmd12;
big-endian;
@@ -454,7 +458,8 @@
reg = <0x0 0x2100000 0x0 0x10000>;
interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "dspi";
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
spi-num-chipselects = <5>;
big-endian;
status = "disabled";
@@ -466,7 +471,8 @@
#size-cells = <0>;
reg = <0x0 0x2180000 0x0 0x10000>;
interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
dmas = <&edma0 1 39>,
<&edma0 1 38>;
dma-names = "tx", "rx";
@@ -479,7 +485,8 @@
#size-cells = <0>;
reg = <0x0 0x2190000 0x0 0x10000>;
interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
status = "disabled";
};
@@ -489,7 +496,8 @@
#size-cells = <0>;
reg = <0x0 0x21a0000 0x0 0x10000>;
interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
status = "disabled";
};
@@ -499,7 +507,8 @@
#size-cells = <0>;
reg = <0x0 0x21b0000 0x0 0x10000>;
interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
status = "disabled";
};
@@ -507,7 +516,8 @@
compatible = "fsl,ns16550", "ns16550a";
reg = <0x00 0x21c0500 0x0 0x100>;
interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
status = "disabled";
};
@@ -515,7 +525,8 @@
compatible = "fsl,ns16550", "ns16550a";
reg = <0x00 0x21c0600 0x0 0x100>;
interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
status = "disabled";
};
@@ -523,7 +534,8 @@
compatible = "fsl,ns16550", "ns16550a";
reg = <0x0 0x21d0500 0x0 0x100>;
interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
status = "disabled";
};
@@ -531,7 +543,8 @@
compatible = "fsl,ns16550", "ns16550a";
reg = <0x0 0x21d0600 0x0 0x100>;
interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
status = "disabled";
};
@@ -579,7 +592,8 @@
compatible = "fsl,ls1021a-lpuart";
reg = <0x0 0x2950000 0x0 0x1000>;
interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 0>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(1)>;
clock-names = "ipg";
status = "disabled";
};
@@ -588,7 +602,8 @@
compatible = "fsl,ls1021a-lpuart";
reg = <0x0 0x2960000 0x0 0x1000>;
interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
clock-names = "ipg";
status = "disabled";
};
@@ -597,7 +612,8 @@
compatible = "fsl,ls1021a-lpuart";
reg = <0x0 0x2970000 0x0 0x1000>;
interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
clock-names = "ipg";
status = "disabled";
};
@@ -606,7 +622,8 @@
compatible = "fsl,ls1021a-lpuart";
reg = <0x0 0x2980000 0x0 0x1000>;
interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
clock-names = "ipg";
status = "disabled";
};
@@ -615,7 +632,8 @@
compatible = "fsl,ls1021a-lpuart";
reg = <0x0 0x2990000 0x0 0x1000>;
interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
clock-names = "ipg";
status = "disabled";
};
@@ -624,7 +642,8 @@
compatible = "fsl,ls1021a-lpuart";
reg = <0x0 0x29a0000 0x0 0x1000>;
interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
clock-names = "ipg";
status = "disabled";
};
@@ -633,7 +652,8 @@
compatible = "fsl,imx21-wdt";
reg = <0x0 0x2ad0000 0x0 0x10000>;
interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
big-endian;
};
@@ -649,8 +669,10 @@
dma-channels = <32>;
big-endian;
clock-names = "dmamux0", "dmamux1";
- clocks = <&clockgen 4 1>,
- <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
};
usb0: usb@2f00000 {
@@ -689,7 +711,8 @@
<0x0 0x20140520 0x0 0x4>;
reg-names = "ahci", "sata-ecc";
interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
};
msi1: msi-controller@1580000 {
--
2.20.1
^ permalink raw reply related [flat|nested] 9+ messages in thread* [PATCH 5/7] arm64: dts: ls1088a: use constants in the clockgen phandle
2020-12-29 11:47 [PATCH 0/7] arm64: dts: fsl: use the new clockgen constants Michael Walle
` (3 preceding siblings ...)
2020-12-29 11:47 ` [PATCH 4/7] arm64: dts: ls1046a: " Michael Walle
@ 2020-12-29 11:47 ` Michael Walle
2020-12-29 11:47 ` [PATCH 6/7] arm64: dts: ls208xa: " Michael Walle
` (2 subsequent siblings)
7 siblings, 0 replies; 9+ messages in thread
From: Michael Walle @ 2020-12-29 11:47 UTC (permalink / raw)
To: linux-arm-kernel, devicetree, linux-kernel
Cc: Shawn Guo, Li Yang, Rob Herring, Michael Walle
Now that we have constants, use them. This is just a mechanical change.
Signed-off-by: Michael Walle <michael@walle.cc>
---
.../arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 91 +++++++++++++------
1 file changed, 64 insertions(+), 27 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
index 6403455ed039..95647e5afb02 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
@@ -7,6 +7,7 @@
* Harninder Rai <harninder.rai@nxp.com>
*
*/
+#include <dt-bindings/clock/fsl,qoriq-clockgen.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/thermal/thermal.h>
@@ -30,7 +31,7 @@
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x0>;
- clocks = <&clockgen 1 0>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 0>;
cpu-idle-states = <&CPU_PH20>;
#cooling-cells = <2>;
};
@@ -39,7 +40,7 @@
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x1>;
- clocks = <&clockgen 1 0>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 0>;
cpu-idle-states = <&CPU_PH20>;
#cooling-cells = <2>;
};
@@ -48,7 +49,7 @@
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x2>;
- clocks = <&clockgen 1 0>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 0>;
cpu-idle-states = <&CPU_PH20>;
#cooling-cells = <2>;
};
@@ -57,7 +58,7 @@
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x3>;
- clocks = <&clockgen 1 0>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 0>;
cpu-idle-states = <&CPU_PH20>;
#cooling-cells = <2>;
};
@@ -66,7 +67,7 @@
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x100>;
- clocks = <&clockgen 1 1>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 1>;
cpu-idle-states = <&CPU_PH20>;
#cooling-cells = <2>;
};
@@ -75,7 +76,7 @@
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x101>;
- clocks = <&clockgen 1 1>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 1>;
cpu-idle-states = <&CPU_PH20>;
#cooling-cells = <2>;
};
@@ -84,7 +85,7 @@
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x102>;
- clocks = <&clockgen 1 1>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 1>;
cpu-idle-states = <&CPU_PH20>;
#cooling-cells = <2>;
};
@@ -93,7 +94,7 @@
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x103>;
- clocks = <&clockgen 1 1>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 1>;
cpu-idle-states = <&CPU_PH20>;
#cooling-cells = <2>;
};
@@ -279,7 +280,8 @@
reg = <0x0 0x2100000 0x0 0x10000>;
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "dspi";
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
spi-num-chipselects = <6>;
status = "disabled";
};
@@ -287,7 +289,8 @@
duart0: serial@21c0500 {
compatible = "fsl,ns16550", "ns16550a";
reg = <0x0 0x21c0500 0x0 0x100>;
- clocks = <&clockgen 4 3>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
@@ -295,7 +298,8 @@
duart1: serial@21c0600 {
compatible = "fsl,ns16550", "ns16550a";
reg = <0x0 0x21c0600 0x0 0x100>;
- clocks = <&clockgen 4 3>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
@@ -360,7 +364,8 @@
#size-cells = <0>;
reg = <0x0 0x2000000 0x0 0x10000>;
interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 7>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(8)>;
status = "disabled";
};
@@ -370,7 +375,8 @@
#size-cells = <0>;
reg = <0x0 0x2010000 0x0 0x10000>;
interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 7>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(8)>;
status = "disabled";
};
@@ -380,7 +386,8 @@
#size-cells = <0>;
reg = <0x0 0x2020000 0x0 0x10000>;
interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 7>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(8)>;
status = "disabled";
};
@@ -390,7 +397,8 @@
#size-cells = <0>;
reg = <0x0 0x2030000 0x0 0x10000>;
interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 7>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(8)>;
status = "disabled";
};
@@ -403,7 +411,10 @@
reg-names = "QuadSPI", "QuadSPI-memory";
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "qspi_en", "qspi";
- clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
status = "disabled";
};
@@ -412,7 +423,7 @@
reg = <0x0 0x2140000 0x0 0x10000>;
interrupts = <0 28 0x4>; /* Level high type */
clock-frequency = <0>;
- clocks = <&clockgen 2 1>;
+ clocks = <&clockgen QORIQ_CLK_HWACCEL 1>;
voltage-ranges = <1800 1800 3300 3300>;
sdhci,auto-cmd12;
little-endian;
@@ -447,7 +458,8 @@
<0x7 0x100520 0x0 0x4>;
reg-names = "ahci", "sata-ecc";
interrupts = <0 133 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 3>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
dma-coherent;
status = "disabled";
};
@@ -698,7 +710,8 @@
ptp-timer@8b95000 {
compatible = "fsl,dpaa2-ptp";
reg = <0x0 0x8b95000 0x0 0x100>;
- clocks = <&clockgen 4 0>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(1)>;
little-endian;
fsl,extts-fifo;
};
@@ -787,56 +800,80 @@
cluster1_core0_watchdog: wdt@c000000 {
compatible = "arm,sp805-wdt", "arm,primecell";
reg = <0x0 0xc000000 0x0 0x1000>;
- clocks = <&clockgen 4 15>, <&clockgen 4 15>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(16)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(16)>;
clock-names = "wdog_clk", "apb_pclk";
};
cluster1_core1_watchdog: wdt@c010000 {
compatible = "arm,sp805-wdt", "arm,primecell";
reg = <0x0 0xc010000 0x0 0x1000>;
- clocks = <&clockgen 4 15>, <&clockgen 4 15>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(16)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(16)>;
clock-names = "wdog_clk", "apb_pclk";
};
cluster1_core2_watchdog: wdt@c020000 {
compatible = "arm,sp805-wdt", "arm,primecell";
reg = <0x0 0xc020000 0x0 0x1000>;
- clocks = <&clockgen 4 15>, <&clockgen 4 15>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(16)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(16)>;
clock-names = "wdog_clk", "apb_pclk";
};
cluster1_core3_watchdog: wdt@c030000 {
compatible = "arm,sp805-wdt", "arm,primecell";
reg = <0x0 0xc030000 0x0 0x1000>;
- clocks = <&clockgen 4 15>, <&clockgen 4 15>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(16)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(16)>;
clock-names = "wdog_clk", "apb_pclk";
};
cluster2_core0_watchdog: wdt@c100000 {
compatible = "arm,sp805-wdt", "arm,primecell";
reg = <0x0 0xc100000 0x0 0x1000>;
- clocks = <&clockgen 4 15>, <&clockgen 4 15>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(16)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(16)>;
clock-names = "wdog_clk", "apb_pclk";
};
cluster2_core1_watchdog: wdt@c110000 {
compatible = "arm,sp805-wdt", "arm,primecell";
reg = <0x0 0xc110000 0x0 0x1000>;
- clocks = <&clockgen 4 15>, <&clockgen 4 15>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(16)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(16)>;
clock-names = "wdog_clk", "apb_pclk";
};
cluster2_core2_watchdog: wdt@c120000 {
compatible = "arm,sp805-wdt", "arm,primecell";
reg = <0x0 0xc120000 0x0 0x1000>;
- clocks = <&clockgen 4 15>, <&clockgen 4 15>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(16)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(16)>;
clock-names = "wdog_clk", "apb_pclk";
};
cluster2_core3_watchdog: wdt@c130000 {
compatible = "arm,sp805-wdt", "arm,primecell";
reg = <0x0 0xc130000 0x0 0x1000>;
- clocks = <&clockgen 4 15>, <&clockgen 4 15>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(16)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(16)>;
clock-names = "wdog_clk", "apb_pclk";
};
--
2.20.1
^ permalink raw reply related [flat|nested] 9+ messages in thread* [PATCH 6/7] arm64: dts: ls208xa: use constants in the clockgen phandle
2020-12-29 11:47 [PATCH 0/7] arm64: dts: fsl: use the new clockgen constants Michael Walle
` (4 preceding siblings ...)
2020-12-29 11:47 ` [PATCH 5/7] arm64: dts: ls1088a: " Michael Walle
@ 2020-12-29 11:47 ` Michael Walle
2020-12-29 11:47 ` [PATCH 7/7] arm64: dts: lx2160a: " Michael Walle
2021-01-11 1:20 ` [PATCH 0/7] arm64: dts: fsl: use the new clockgen constants Shawn Guo
7 siblings, 0 replies; 9+ messages in thread
From: Michael Walle @ 2020-12-29 11:47 UTC (permalink / raw)
To: linux-arm-kernel, devicetree, linux-kernel
Cc: Shawn Guo, Li Yang, Rob Herring, Michael Walle
Now that we have constants, use them. This is just a mechanical change.
Signed-off-by: Michael Walle <michael@walle.cc>
---
.../arm64/boot/dts/freescale/fsl-ls2080a.dtsi | 17 ++--
.../arm64/boot/dts/freescale/fsl-ls2088a.dtsi | 17 ++--
.../arm64/boot/dts/freescale/fsl-ls208xa.dtsi | 85 ++++++++++++++-----
3 files changed, 81 insertions(+), 38 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
index f9c1d30cf4a7..76ab68d2de0b 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2080a.dtsi
@@ -9,6 +9,7 @@
*
*/
+#include <dt-bindings/clock/fsl,qoriq-clockgen.h>
#include "fsl-ls208xa.dtsi"
&cpu {
@@ -16,7 +17,7 @@
device_type = "cpu";
compatible = "arm,cortex-a57";
reg = <0x0>;
- clocks = <&clockgen 1 0>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 0>;
cpu-idle-states = <&CPU_PW20>;
next-level-cache = <&cluster0_l2>;
#cooling-cells = <2>;
@@ -26,7 +27,7 @@
device_type = "cpu";
compatible = "arm,cortex-a57";
reg = <0x1>;
- clocks = <&clockgen 1 0>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 0>;
cpu-idle-states = <&CPU_PW20>;
next-level-cache = <&cluster0_l2>;
#cooling-cells = <2>;
@@ -36,7 +37,7 @@
device_type = "cpu";
compatible = "arm,cortex-a57";
reg = <0x100>;
- clocks = <&clockgen 1 1>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 1>;
cpu-idle-states = <&CPU_PW20>;
next-level-cache = <&cluster1_l2>;
#cooling-cells = <2>;
@@ -46,7 +47,7 @@
device_type = "cpu";
compatible = "arm,cortex-a57";
reg = <0x101>;
- clocks = <&clockgen 1 1>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 1>;
cpu-idle-states = <&CPU_PW20>;
next-level-cache = <&cluster1_l2>;
#cooling-cells = <2>;
@@ -56,7 +57,7 @@
device_type = "cpu";
compatible = "arm,cortex-a57";
reg = <0x200>;
- clocks = <&clockgen 1 2>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 2>;
cpu-idle-states = <&CPU_PW20>;
next-level-cache = <&cluster2_l2>;
#cooling-cells = <2>;
@@ -66,7 +67,7 @@
device_type = "cpu";
compatible = "arm,cortex-a57";
reg = <0x201>;
- clocks = <&clockgen 1 2>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 2>;
cpu-idle-states = <&CPU_PW20>;
next-level-cache = <&cluster2_l2>;
#cooling-cells = <2>;
@@ -76,7 +77,7 @@
device_type = "cpu";
compatible = "arm,cortex-a57";
reg = <0x300>;
- clocks = <&clockgen 1 3>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 3>;
next-level-cache = <&cluster3_l2>;
cpu-idle-states = <&CPU_PW20>;
#cooling-cells = <2>;
@@ -86,7 +87,7 @@
device_type = "cpu";
compatible = "arm,cortex-a57";
reg = <0x301>;
- clocks = <&clockgen 1 3>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 3>;
cpu-idle-states = <&CPU_PW20>;
next-level-cache = <&cluster3_l2>;
#cooling-cells = <2>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi
index a5f668d786b8..da24dc127698 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a.dtsi
@@ -9,6 +9,7 @@
*
*/
+#include <dt-bindings/clock/fsl,qoriq-clockgen.h>
#include "fsl-ls208xa.dtsi"
&cpu {
@@ -16,7 +17,7 @@
device_type = "cpu";
compatible = "arm,cortex-a72";
reg = <0x0>;
- clocks = <&clockgen 1 0>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 0>;
cpu-idle-states = <&CPU_PW20>;
next-level-cache = <&cluster0_l2>;
#cooling-cells = <2>;
@@ -26,7 +27,7 @@
device_type = "cpu";
compatible = "arm,cortex-a72";
reg = <0x1>;
- clocks = <&clockgen 1 0>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 0>;
cpu-idle-states = <&CPU_PW20>;
next-level-cache = <&cluster0_l2>;
#cooling-cells = <2>;
@@ -36,7 +37,7 @@
device_type = "cpu";
compatible = "arm,cortex-a72";
reg = <0x100>;
- clocks = <&clockgen 1 1>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 1>;
cpu-idle-states = <&CPU_PW20>;
next-level-cache = <&cluster1_l2>;
#cooling-cells = <2>;
@@ -46,7 +47,7 @@
device_type = "cpu";
compatible = "arm,cortex-a72";
reg = <0x101>;
- clocks = <&clockgen 1 1>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 1>;
cpu-idle-states = <&CPU_PW20>;
next-level-cache = <&cluster1_l2>;
#cooling-cells = <2>;
@@ -56,7 +57,7 @@
device_type = "cpu";
compatible = "arm,cortex-a72";
reg = <0x200>;
- clocks = <&clockgen 1 2>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 2>;
next-level-cache = <&cluster2_l2>;
cpu-idle-states = <&CPU_PW20>;
#cooling-cells = <2>;
@@ -66,7 +67,7 @@
device_type = "cpu";
compatible = "arm,cortex-a72";
reg = <0x201>;
- clocks = <&clockgen 1 2>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 2>;
cpu-idle-states = <&CPU_PW20>;
next-level-cache = <&cluster2_l2>;
#cooling-cells = <2>;
@@ -76,7 +77,7 @@
device_type = "cpu";
compatible = "arm,cortex-a72";
reg = <0x300>;
- clocks = <&clockgen 1 3>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 3>;
cpu-idle-states = <&CPU_PW20>;
next-level-cache = <&cluster3_l2>;
#cooling-cells = <2>;
@@ -86,7 +87,7 @@
device_type = "cpu";
compatible = "arm,cortex-a72";
reg = <0x301>;
- clocks = <&clockgen 1 3>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 3>;
cpu-idle-states = <&CPU_PW20>;
next-level-cache = <&cluster3_l2>;
#cooling-cells = <2>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
index c68901f8c6f0..6110025f02a4 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
@@ -9,6 +9,7 @@
*
*/
+#include <dt-bindings/clock/fsl,qoriq-clockgen.h>
#include <dt-bindings/thermal/thermal.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -325,84 +326,112 @@
serial0: serial@21c0500 {
compatible = "fsl,ns16550", "ns16550a";
reg = <0x0 0x21c0500 0x0 0x100>;
- clocks = <&clockgen 4 3>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
interrupts = <0 32 0x4>; /* Level high type */
};
serial1: serial@21c0600 {
compatible = "fsl,ns16550", "ns16550a";
reg = <0x0 0x21c0600 0x0 0x100>;
- clocks = <&clockgen 4 3>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
interrupts = <0 32 0x4>; /* Level high type */
};
serial2: serial@21d0500 {
compatible = "fsl,ns16550", "ns16550a";
reg = <0x0 0x21d0500 0x0 0x100>;
- clocks = <&clockgen 4 3>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
interrupts = <0 33 0x4>; /* Level high type */
};
serial3: serial@21d0600 {
compatible = "fsl,ns16550", "ns16550a";
reg = <0x0 0x21d0600 0x0 0x100>;
- clocks = <&clockgen 4 3>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
interrupts = <0 33 0x4>; /* Level high type */
};
cluster1_core0_watchdog: wdt@c000000 {
compatible = "arm,sp805-wdt", "arm,primecell";
reg = <0x0 0xc000000 0x0 0x1000>;
- clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
clock-names = "wdog_clk", "apb_pclk";
};
cluster1_core1_watchdog: wdt@c010000 {
compatible = "arm,sp805-wdt", "arm,primecell";
reg = <0x0 0xc010000 0x0 0x1000>;
- clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
clock-names = "wdog_clk", "apb_pclk";
};
cluster2_core0_watchdog: wdt@c100000 {
compatible = "arm,sp805-wdt", "arm,primecell";
reg = <0x0 0xc100000 0x0 0x1000>;
- clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
clock-names = "wdog_clk", "apb_pclk";
};
cluster2_core1_watchdog: wdt@c110000 {
compatible = "arm,sp805-wdt", "arm,primecell";
reg = <0x0 0xc110000 0x0 0x1000>;
- clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
clock-names = "wdog_clk", "apb_pclk";
};
cluster3_core0_watchdog: wdt@c200000 {
compatible = "arm,sp805-wdt", "arm,primecell";
reg = <0x0 0xc200000 0x0 0x1000>;
- clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
clock-names = "wdog_clk", "apb_pclk";
};
cluster3_core1_watchdog: wdt@c210000 {
compatible = "arm,sp805-wdt", "arm,primecell";
reg = <0x0 0xc210000 0x0 0x1000>;
- clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
clock-names = "wdog_clk", "apb_pclk";
};
cluster4_core0_watchdog: wdt@c300000 {
compatible = "arm,sp805-wdt", "arm,primecell";
reg = <0x0 0xc300000 0x0 0x1000>;
- clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
clock-names = "wdog_clk", "apb_pclk";
};
cluster4_core1_watchdog: wdt@c310000 {
compatible = "arm,sp805-wdt", "arm,primecell";
reg = <0x0 0xc310000 0x0 0x1000>;
- clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
clock-names = "wdog_clk", "apb_pclk";
};
@@ -453,7 +482,8 @@
ptp-timer@8b95000 {
compatible = "fsl,dpaa2-ptp";
reg = <0x0 0x8b95000 0x0 0x100>;
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
little-endian;
fsl,extts-fifo;
};
@@ -864,7 +894,8 @@
#size-cells = <0>;
reg = <0x0 0x2100000 0x0 0x10000>;
interrupts = <0 26 0x4>; /* Level high type */
- clocks = <&clockgen 4 3>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
clock-names = "dspi";
spi-num-chipselects = <5>;
bus-num = <0>;
@@ -875,7 +906,8 @@
compatible = "fsl,ls2080a-esdhc", "fsl,esdhc";
reg = <0x0 0x2140000 0x0 0x10000>;
interrupts = <0 28 0x4>; /* Level high type */
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
voltage-ranges = <1800 1800 3300 3300>;
sdhci,auto-cmd12;
little-endian;
@@ -934,7 +966,8 @@
reg = <0x0 0x2000000 0x0 0x10000>;
interrupts = <0 34 0x4>; /* Level high type */
clock-names = "i2c";
- clocks = <&clockgen 4 3>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
};
i2c1: i2c@2010000 {
@@ -945,7 +978,8 @@
reg = <0x0 0x2010000 0x0 0x10000>;
interrupts = <0 34 0x4>; /* Level high type */
clock-names = "i2c";
- clocks = <&clockgen 4 3>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
};
i2c2: i2c@2020000 {
@@ -956,7 +990,8 @@
reg = <0x0 0x2020000 0x0 0x10000>;
interrupts = <0 35 0x4>; /* Level high type */
clock-names = "i2c";
- clocks = <&clockgen 4 3>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
};
i2c3: i2c@2030000 {
@@ -967,7 +1002,8 @@
reg = <0x0 0x2030000 0x0 0x10000>;
interrupts = <0 35 0x4>; /* Level high type */
clock-names = "i2c";
- clocks = <&clockgen 4 3>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
};
ifc: ifc@2240000 {
@@ -991,7 +1027,10 @@
<0x0 0x20000000 0x0 0x10000000>;
reg-names = "QuadSPI", "QuadSPI-memory";
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
clock-names = "qspi_en", "qspi";
status = "disabled";
};
@@ -1089,7 +1128,8 @@
compatible = "fsl,ls2080a-ahci";
reg = <0x0 0x3200000 0x0 0x10000>;
interrupts = <0 133 0x4>; /* Level high type */
- clocks = <&clockgen 4 3>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
dma-coherent;
};
@@ -1098,7 +1138,8 @@
compatible = "fsl,ls2080a-ahci";
reg = <0x0 0x3210000 0x0 0x10000>;
interrupts = <0 136 0x4>; /* Level high type */
- clocks = <&clockgen 4 3>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
dma-coherent;
};
--
2.20.1
^ permalink raw reply related [flat|nested] 9+ messages in thread* [PATCH 7/7] arm64: dts: lx2160a: use constants in the clockgen phandle
2020-12-29 11:47 [PATCH 0/7] arm64: dts: fsl: use the new clockgen constants Michael Walle
` (5 preceding siblings ...)
2020-12-29 11:47 ` [PATCH 6/7] arm64: dts: ls208xa: " Michael Walle
@ 2020-12-29 11:47 ` Michael Walle
2021-01-11 1:20 ` [PATCH 0/7] arm64: dts: fsl: use the new clockgen constants Shawn Guo
7 siblings, 0 replies; 9+ messages in thread
From: Michael Walle @ 2020-12-29 11:47 UTC (permalink / raw)
To: linux-arm-kernel, devicetree, linux-kernel
Cc: Shawn Guo, Li Yang, Rob Herring, Michael Walle
Now that we have constants, use them. This is just a mechanical change.
Signed-off-by: Michael Walle <michael@walle.cc>
---
.../arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 92 ++++++++++++-------
1 file changed, 57 insertions(+), 35 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
index 197397777c83..b16e7f738f52 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
@@ -4,6 +4,7 @@
//
// Copyright 2018-2020 NXP
+#include <dt-bindings/clock/fsl,qoriq-clockgen.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/thermal/thermal.h>
@@ -30,7 +31,7 @@
compatible = "arm,cortex-a72";
enable-method = "psci";
reg = <0x0>;
- clocks = <&clockgen 1 0>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 0>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <128>;
@@ -47,7 +48,7 @@
compatible = "arm,cortex-a72";
enable-method = "psci";
reg = <0x1>;
- clocks = <&clockgen 1 0>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 0>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <128>;
@@ -64,7 +65,7 @@
compatible = "arm,cortex-a72";
enable-method = "psci";
reg = <0x100>;
- clocks = <&clockgen 1 1>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 1>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <128>;
@@ -81,7 +82,7 @@
compatible = "arm,cortex-a72";
enable-method = "psci";
reg = <0x101>;
- clocks = <&clockgen 1 1>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 1>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <128>;
@@ -98,7 +99,7 @@
compatible = "arm,cortex-a72";
enable-method = "psci";
reg = <0x200>;
- clocks = <&clockgen 1 2>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 2>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <128>;
@@ -115,7 +116,7 @@
compatible = "arm,cortex-a72";
enable-method = "psci";
reg = <0x201>;
- clocks = <&clockgen 1 2>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 2>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <128>;
@@ -132,7 +133,7 @@
compatible = "arm,cortex-a72";
enable-method = "psci";
reg = <0x300>;
- clocks = <&clockgen 1 3>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 3>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <128>;
@@ -149,7 +150,7 @@
compatible = "arm,cortex-a72";
enable-method = "psci";
reg = <0x301>;
- clocks = <&clockgen 1 3>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 3>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <128>;
@@ -166,7 +167,7 @@
compatible = "arm,cortex-a72";
enable-method = "psci";
reg = <0x400>;
- clocks = <&clockgen 1 4>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 4>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <128>;
@@ -183,7 +184,7 @@
compatible = "arm,cortex-a72";
enable-method = "psci";
reg = <0x401>;
- clocks = <&clockgen 1 4>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 4>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <128>;
@@ -200,7 +201,7 @@
compatible = "arm,cortex-a72";
enable-method = "psci";
reg = <0x500>;
- clocks = <&clockgen 1 5>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 5>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <128>;
@@ -217,7 +218,7 @@
compatible = "arm,cortex-a72";
enable-method = "psci";
reg = <0x501>;
- clocks = <&clockgen 1 5>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 5>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <128>;
@@ -234,7 +235,7 @@
compatible = "arm,cortex-a72";
enable-method = "psci";
reg = <0x600>;
- clocks = <&clockgen 1 6>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 6>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <128>;
@@ -251,7 +252,7 @@
compatible = "arm,cortex-a72";
enable-method = "psci";
reg = <0x601>;
- clocks = <&clockgen 1 6>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 6>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <128>;
@@ -268,7 +269,7 @@
compatible = "arm,cortex-a72";
enable-method = "psci";
reg = <0x700>;
- clocks = <&clockgen 1 7>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 7>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <128>;
@@ -285,7 +286,7 @@
compatible = "arm,cortex-a72";
enable-method = "psci";
reg = <0x701>;
- clocks = <&clockgen 1 7>;
+ clocks = <&clockgen QORIQ_CLK_CMUX 7>;
d-cache-size = <0x8000>;
d-cache-line-size = <64>;
d-cache-sets = <128>;
@@ -685,7 +686,8 @@
reg = <0x0 0x2000000 0x0 0x10000>;
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "i2c";
- clocks = <&clockgen 4 15>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(16)>;
scl-gpio = <&gpio2 15 GPIO_ACTIVE_HIGH>;
status = "disabled";
};
@@ -697,7 +699,8 @@
reg = <0x0 0x2010000 0x0 0x10000>;
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "i2c";
- clocks = <&clockgen 4 15>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(16)>;
status = "disabled";
};
@@ -708,7 +711,8 @@
reg = <0x0 0x2020000 0x0 0x10000>;
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "i2c";
- clocks = <&clockgen 4 15>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(16)>;
status = "disabled";
};
@@ -719,7 +723,8 @@
reg = <0x0 0x2030000 0x0 0x10000>;
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "i2c";
- clocks = <&clockgen 4 15>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(16)>;
status = "disabled";
};
@@ -730,7 +735,8 @@
reg = <0x0 0x2040000 0x0 0x10000>;
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "i2c";
- clocks = <&clockgen 4 15>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(16)>;
scl-gpio = <&gpio2 16 GPIO_ACTIVE_HIGH>;
status = "disabled";
};
@@ -742,7 +748,8 @@
reg = <0x0 0x2050000 0x0 0x10000>;
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "i2c";
- clocks = <&clockgen 4 15>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(16)>;
status = "disabled";
};
@@ -753,7 +760,8 @@
reg = <0x0 0x2060000 0x0 0x10000>;
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "i2c";
- clocks = <&clockgen 4 15>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(16)>;
status = "disabled";
};
@@ -764,7 +772,8 @@
reg = <0x0 0x2070000 0x0 0x10000>;
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "i2c";
- clocks = <&clockgen 4 15>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(16)>;
status = "disabled";
};
@@ -776,7 +785,10 @@
<0x0 0x20000000 0x0 0x10000000>;
reg-names = "fspi_base", "fspi_mmap";
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 3>, <&clockgen 4 3>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>,
+ <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
clock-names = "fspi_en", "fspi";
status = "disabled";
};
@@ -787,7 +799,8 @@
#size-cells = <0>;
reg = <0x0 0x2100000 0x0 0x10000>;
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 7>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(8)>;
clock-names = "dspi";
spi-num-chipselects = <5>;
bus-num = <0>;
@@ -800,7 +813,8 @@
#size-cells = <0>;
reg = <0x0 0x2110000 0x0 0x10000>;
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 7>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(8)>;
clock-names = "dspi";
spi-num-chipselects = <5>;
bus-num = <1>;
@@ -813,7 +827,8 @@
#size-cells = <0>;
reg = <0x0 0x2120000 0x0 0x10000>;
interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 7>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(8)>;
clock-names = "dspi";
spi-num-chipselects = <5>;
bus-num = <2>;
@@ -824,7 +839,8 @@
compatible = "fsl,esdhc";
reg = <0x0 0x2140000 0x0 0x10000>;
interrupts = <0 28 0x4>; /* Level high type */
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
dma-coherent;
voltage-ranges = <1800 1800 3300 3300>;
sdhci,auto-cmd12;
@@ -837,7 +853,8 @@
compatible = "fsl,esdhc";
reg = <0x0 0x2150000 0x0 0x10000>;
interrupts = <0 63 0x4>; /* Level high type */
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
dma-coherent;
voltage-ranges = <1800 1800 3300 3300>;
sdhci,auto-cmd12;
@@ -973,7 +990,8 @@
<0x7 0x100520 0x0 0x4>;
reg-names = "ahci", "sata-ecc";
interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 3>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
dma-coherent;
status = "disabled";
};
@@ -984,7 +1002,8 @@
<0x7 0x100520 0x0 0x4>;
reg-names = "ahci", "sata-ecc";
interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 3>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
dma-coherent;
status = "disabled";
};
@@ -995,7 +1014,8 @@
<0x7 0x100520 0x0 0x4>;
reg-names = "ahci", "sata-ecc";
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 3>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
dma-coherent;
status = "disabled";
};
@@ -1006,7 +1026,8 @@
<0x7 0x100520 0x0 0x4>;
reg-names = "ahci", "sata-ecc";
interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clockgen 4 3>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(4)>;
dma-coherent;
status = "disabled";
};
@@ -1279,7 +1300,8 @@
ptp-timer@8b95000 {
compatible = "fsl,dpaa2-ptp";
reg = <0x0 0x8b95000 0x0 0x100>;
- clocks = <&clockgen 4 1>;
+ clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
+ QORIQ_CLK_PLL_DIV(2)>;
little-endian;
fsl,extts-fifo;
};
--
2.20.1
^ permalink raw reply related [flat|nested] 9+ messages in thread* Re: [PATCH 0/7] arm64: dts: fsl: use the new clockgen constants
2020-12-29 11:47 [PATCH 0/7] arm64: dts: fsl: use the new clockgen constants Michael Walle
` (6 preceding siblings ...)
2020-12-29 11:47 ` [PATCH 7/7] arm64: dts: lx2160a: " Michael Walle
@ 2021-01-11 1:20 ` Shawn Guo
7 siblings, 0 replies; 9+ messages in thread
From: Shawn Guo @ 2021-01-11 1:20 UTC (permalink / raw)
To: Michael Walle
Cc: linux-arm-kernel, devicetree, linux-kernel, Li Yang, Rob Herring
On Tue, Dec 29, 2020 at 12:47:33PM +0100, Michael Walle wrote:
> Since commit 4cb15934ba05 ("clk: qoriq: provide constants for the type")
> there are constants for better readabilty. This series will use them for
> all arm64 device trees.
>
> This is just a mechanical change. The change was done with the following
> script:
>
> $ sed -e 's/<&clockgen 0 \([0-9]\)>/<\&clockgen QORIQ_CLK_SYSCLK \1>/g' \
> -e 's/<&clockgen 1 \([0-9]\)>/<\&clockgen QORIQ_CLK_CMUX \1>/g' \
> -e 's/<&clockgen 2 \([0-9]\)>/<\&clockgen QORIQ_CLK_HWACCEL \1>/g' \
> -e 's/<&clockgen 3 \([0-9]\)>/<\&clockgen QORIQ_CLK_FMAN \1>/g' \
> -e 's/<&clockgen 4 0>/<\&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(1)>/g' \
> -e 's/<&clockgen 4 1>/<\&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(2)>/g' \
> -e 's/<&clockgen 4 3>/<\&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(4)>/g' \
> -e 's/<&clockgen 4 7>/<\&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(8)>/g' \
> -e 's/<&clockgen 4 15>/<\&clockgen QORIQ_CLK_PLATFORM_PLL QORIQ_CLK_PLL_DIV(16)>/g' \
> -i \
> arm64/boot/dts/freescale/fsl-ls1012a.dtsi \
> arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var3-ads2.dts \
> arm64/boot/dts/freescale/fsl-ls1028a.dtsi \
> arm64/boot/dts/freescale/fsl-ls1043a.dtsi \
> arm64/boot/dts/freescale/fsl-ls1046a.dtsi \
> arm64/boot/dts/freescale/fsl-ls1088a.dtsi \
> arm64/boot/dts/freescale/fsl-ls2080a.dtsi \
> arm64/boot/dts/freescale/fsl-ls2088a.dtsi \
> arm64/boot/dts/freescale/fsl-ls208xa.dtsi \
> arm64/boot/dts/freescale/fsl-lx2160a.dtsi \
> boot/dts/freescale/qoriq-fman3-0.dtsi
>
> Afterwards the changes were manually clean-up for proper indendation, the
> include file was added and split into individual commits per SoC.
>
> Michael Walle (7):
> arm64: dts: ls1012a: use constants in the clockgen phandle
> arm64: dts: ls1028a: use constants in the clockgen phandle
> arm64: dts: ls1043a: use constants in the clockgen phandle
> arm64: dts: ls1046a: use constants in the clockgen phandle
> arm64: dts: ls1088a: use constants in the clockgen phandle
> arm64: dts: ls208xa: use constants in the clockgen phandle
> arm64: dts: lx2160a: use constants in the clockgen phandle
Applied all, thanks.
^ permalink raw reply [flat|nested] 9+ messages in thread