[PATCH v2 1/4] dt-bindings: phy: qcom,qmp: Add SM8150, SM8250 and SM8350 USB PHY bindings

[Jack Pham <jackp@codeaurora.org>]

Add the compatible strings for the USB3 PHYs found on SM8150, SM8250
and SM8350 SoCs. These require separate subschemas due to the different
required clock entries.

Note the SM8150 and SM8250 compatibles have already been in place in
the dts as well as the driver implementation but were missing from
the documentation.

Signed-off-by: Jack Pham <jackp@codeaurora.org>
---
 .../devicetree/bindings/phy/qcom,qmp-phy.yaml | 67 +++++++++++++++++++
 1 file changed, 67 insertions(+)

diff --git a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
index 390df23b82e7..841c72863b4f 100644
--- a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
@@ -30,15 +30,24 @@ properties:
       - qcom,sdm845-qmp-ufs-phy
       - qcom,sdm845-qmp-usb3-uni-phy
       - qcom,sm8150-qmp-ufs-phy
+      - qcom,sm8150-qmp-usb3-phy
+      - qcom,sm8150-qmp-usb3-uni-phy
       - qcom,sm8250-qmp-ufs-phy
       - qcom,sm8250-qmp-gen3x1-pcie-phy
       - qcom,sm8250-qmp-gen3x2-pcie-phy
       - qcom,sm8250-qmp-modem-pcie-phy
+      - qcom,sm8250-qmp-usb3-phy
+      - qcom,sm8250-qmp-usb3-uni-phy
+      - qcom,sm8350-qmp-usb3-phy
+      - qcom,sm8350-qmp-usb3-uni-phy
       - qcom,sdx55-qmp-usb3-uni-phy
 
   reg:
+    minItems: 1
+    maxItems: 2
     items:
       - description: Address and length of PHY's common serdes block.
+      - description: Address and length of PHY's DP_COM control block.
 
   "#clock-cells":
     enum: [ 1, 2 ]
@@ -287,6 +296,64 @@ allOf:
         reset-names:
           items:
             - const: phy
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm8150-qmp-usb3-phy
+              - qcom,sm8150-qmp-usb3-uni-phy
+              - qcom,sm8250-qmp-usb3-uni-phy
+              - qcom,sm8350-qmp-usb3-uni-phy
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Phy aux clock.
+            - description: 19.2 MHz ref clk source.
+            - description: 19.2 MHz ref clk.
+            - description: Phy common block aux clock.
+        clock-names:
+          items:
+            - const: aux
+            - const: ref_clk_src
+            - const: ref
+            - const: com_aux
+        resets:
+          items:
+            - description: reset of phy block.
+            - description: phy common block reset.
+        reset-names:
+          items:
+            - const: phy
+            - const: common
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sm8250-qmp-usb3-phy
+              - qcom,sm8350-qmp-usb3-phy
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Phy aux clock.
+            - description: 19.2 MHz ref clk.
+            - description: Phy common block aux clock.
+        clock-names:
+          items:
+            - const: aux
+            - const: ref_clk_src
+            - const: com_aux
+        resets:
+          items:
+            - description: reset of phy block.
+            - description: phy common block reset.
+        reset-names:
+          items:
+            - const: phy
+            - const: common
 
 examples:
   - |
-- 
2.24.0