Re: [PATCH v3 1/2] dt-bindings: rockchip: Add DesignWare based PCIe controller

[Rob Herring <robh@kernel.org>]

On Mon, Jan 25, 2021 at 10:48:24AM +0800, Simon Xue wrote:
> Document DT bindings for PCIe controller found on Rockchip SoC.
> 
> Signed-off-by: Simon Xue <xxm@rock-chips.com>
> ---
>  .../bindings/pci/rockchip-dw-pcie.yaml        | 133 ++++++++++++++++++
>  1 file changed, 133 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml
> 
> diff --git a/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml b/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml
> new file mode 100644
> index 000000000000..24ea42203c14
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml
> @@ -0,0 +1,133 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pci/rockchip-dw-pcie.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: DesignWare based PCIe RC controller on Rockchip SoCs
> +
> +maintainers:
> +  - Shawn Lin <shawn.lin@rock-chips.com>
> +  - Simon Xue <xxm@rock-chips.com>
> +  - Heiko Stuebner <heiko@sntech.de>
> +
> +description: |+
> +  RK3568 SoC PCIe host controller is based on the Synopsys DesignWare
> +  PCIe IP and thus inherits all the common properties defined in
> +  designware-pcie.txt.
> +
> +allOf:
> +  - $ref: /schemas/pci/pci-bus.yaml#
> +
> +# We need a select here so we don't match all nodes with 'snps,dw-pcie'
> +select:
> +  properties:
> +    compatible:
> +      contains:
> +        const: rockchip,rk3568-pcie
> +  required:
> +    - compatible
> +
> +properties:
> +  compatible:
> +    items:
> +      - const: rockchip,rk3568-pcie
> +      - const: snps,dw-pcie
> +
> +  reg:
> +    items:
> +      - description: Data Bus Interface (DBI) registers
> +      - description: Rockchip designed configuration registers
> +
> +  clocks:
> +    items:
> +      - description: AHB clock for PCIe master
> +      - description: AHB clock for PCIe slave
> +      - description: AHB clock for PCIe dbi
> +      - description: APB clock for PCIe
> +      - description: Auxiliary clock for PCIe
> +
> +  clock-names:
> +    items:
> +      - const: aclk_mst
> +      - const: aclk_slv
> +      - const: aclk_dbi
> +      - const: pclk
> +      - const: aux
> +
> +  msi-map: true
> +
> +  num-lanes: true
> +
> +  phys:
> +    maxItems: 1
> +
> +  phy-names:
> +    const: pcie-phy
> +
> +  power-domains:
> +    maxItems: 1
> +
> +  ranges:
> +    maxItems: 3
> +
> +  resets:
> +    maxItems: 1
> +
> +  reset-names:
> +    const: pipe
> +
> +required:
> +  - compatible
> +  - reg
> +  - reg-names
> +  - clocks
> +  - clock-names
> +  - msi-map
> +  - num-lanes
> +  - phys
> +  - phy-names
> +  - power-domains
> +  - resets
> +  - reset-names
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +    bus {
> +        #address-cells = <2>;
> +        #size-cells = <2>;
> +
> +        pcie3x2: pcie@fe280000 {
> +            compatible = "rockchip,rk3568-pcie", "snps,dw-pcie";
> +            reg = <0x3 0xc0800000 0x0 0x400000>,
> +                  <0x0 0xfe280000 0x0 0x10000>;
> +            reg-names = "pcie-dbi", "pcie-apb";

I believe I already said use 'dbi'. The DBI is also not 4MB. The config 
space goes here too, not in 'ranges'.

> +            bus-range = <0x20 0x2f>;
> +            clocks = <&cru 143>, <&cru 144>,
> +                     <&cru 145>, <&cru 146>,
> +                     <&cru 147>;
> +            clock-names = "aclk_mst", "aclk_slv",
> +                          "aclk_dbi", "pclk",
> +                          "aux";
> +            device_type = "pci";
> +            linux,pci-domain = <2>;
> +            max-link-speed = <2>;
> +            msi-map = <0x2000 &its 0x2000 0x1000>;
> +            num-lanes = <2>;
> +            phys = <&pcie30phy>;
> +            phy-names = "pcie-phy";
> +            power-domains = <&power 15>;
> +            ranges = <0x00000800 0x0 0x80000000 0x3 0x80000000 0x0 0x800000>,
> +                     <0x81000000 0x0 0x80800000 0x3 0x80800000 0x0 0x100000>,
> +                     <0x83000000 0x0 0x80900000 0x3 0x80900000 0x0 0x3f700000>;
> +            resets = <&cru 193>;
> +            reset-names = "pipe";
> +            #address-cells = <3>;
> +            #size-cells = <2>;
> +        };
> +    };
> +...
> -- 
> 2.25.1
> 
> 
>