[PATCH v4 1/2] dt-bindings: counter: add pulse-counter binding

[Oleksij Rempel <o.rempel@pengutronix.de>]

Add binding for the pulse counter node

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 .../bindings/counter/pulse-counter.yaml       | 52 +++++++++++++++++++
 1 file changed, 52 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/counter/pulse-counter.yaml

diff --git a/Documentation/devicetree/bindings/counter/pulse-counter.yaml b/Documentation/devicetree/bindings/counter/pulse-counter.yaml
new file mode 100644
index 000000000000..8a82091edd65
--- /dev/null
+++ b/Documentation/devicetree/bindings/counter/pulse-counter.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/counter/pulse-counter.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Pulse counter
+
+maintainers:
+  - Oleksij Rempel <o.rempel@pengutronix.de>
+
+description: |
+  A generic pulse counter to measure pulse frequency. It was developed and used
+  for agricultural devices to measure rotation speed of wheels or other tools.
+  Since the direction of rotation is not important, only one signal line is
+  needed.
+
+properties:
+  compatible:
+    const: virtual,pulse-counter
+
+  interrupts:
+    maxItems: 1
+
+  gpios:
+    description: Optional diagnostic interface to measure signal level
+    maxItems: 1
+
+required:
+  - compatible
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+
+    counter-0 {
+        compatible = "virtual,pulse-counter";
+        interrupts-extended = <&gpio 0 IRQ_TYPE_EDGE_RISING>;
+    };
+
+    counter-1 {
+        compatible = "virtual,pulse-counter";
+        interrupts-extended = <&gpio 1 IRQ_TYPE_EDGE_RISING>;
+        gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+    };
+
+...
-- 
2.30.0