* [PATCH] ARM: dts: ebaz4205: add pinctrl entries for switches
@ 2021-02-01 13:30 Michael Walle
2021-02-03 6:58 ` Michal Simek
0 siblings, 1 reply; 2+ messages in thread
From: Michael Walle @ 2021-02-01 13:30 UTC (permalink / raw)
To: devicetree, linux-arm-kernel, linux-kernel
Cc: Rob Herring, Michal Simek, Michael Walle
Add the pinctrl entries for the GPIOs which are connected to the
push buttons on this board.
Signed-off-by: Michael Walle <michael@walle.cc>
---
arch/arm/boot/dts/zynq-ebaz4205.dts | 23 +++++++++++++++++++++++
1 file changed, 23 insertions(+)
diff --git a/arch/arm/boot/dts/zynq-ebaz4205.dts b/arch/arm/boot/dts/zynq-ebaz4205.dts
index e802d4ae8804..b0b836aedd76 100644
--- a/arch/arm/boot/dts/zynq-ebaz4205.dts
+++ b/arch/arm/boot/dts/zynq-ebaz4205.dts
@@ -43,7 +43,30 @@
};
};
+&gpio0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio0_default>;
+};
+
&pinctrl0 {
+ pinctrl_gpio0_default: gpio0-default {
+ mux {
+ groups = "gpio0_20_grp", "gpio0_32_grp";
+ function = "gpio0";
+ };
+
+ conf {
+ groups = "gpio0_20_grp", "gpio0_32_grp";
+ io-standard = <3>;
+ slew-rate = <0>;
+ };
+
+ conf-pull-up {
+ pins = "MIO20", "MIO32";
+ bias-disable;
+ };
+ };
+
pinctrl_sdhci0_default: sdhci0-default {
mux {
groups = "sdio0_2_grp";
--
2.20.1
^ permalink raw reply related [flat|nested] 2+ messages in thread* Re: [PATCH] ARM: dts: ebaz4205: add pinctrl entries for switches
2021-02-01 13:30 [PATCH] ARM: dts: ebaz4205: add pinctrl entries for switches Michael Walle
@ 2021-02-03 6:58 ` Michal Simek
0 siblings, 0 replies; 2+ messages in thread
From: Michal Simek @ 2021-02-03 6:58 UTC (permalink / raw)
To: Michael Walle, devicetree, linux-arm-kernel, linux-kernel
Cc: Rob Herring, Michal Simek
On 2/1/21 2:30 PM, Michael Walle wrote:
> Add the pinctrl entries for the GPIOs which are connected to the
> push buttons on this board.
>
> Signed-off-by: Michael Walle <michael@walle.cc>
> ---
> arch/arm/boot/dts/zynq-ebaz4205.dts | 23 +++++++++++++++++++++++
> 1 file changed, 23 insertions(+)
>
> diff --git a/arch/arm/boot/dts/zynq-ebaz4205.dts b/arch/arm/boot/dts/zynq-ebaz4205.dts
> index e802d4ae8804..b0b836aedd76 100644
> --- a/arch/arm/boot/dts/zynq-ebaz4205.dts
> +++ b/arch/arm/boot/dts/zynq-ebaz4205.dts
> @@ -43,7 +43,30 @@
> };
> };
>
> +&gpio0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_gpio0_default>;
> +};
> +
> &pinctrl0 {
> + pinctrl_gpio0_default: gpio0-default {
> + mux {
> + groups = "gpio0_20_grp", "gpio0_32_grp";
> + function = "gpio0";
> + };
> +
> + conf {
> + groups = "gpio0_20_grp", "gpio0_32_grp";
> + io-standard = <3>;
> + slew-rate = <0>;
> + };
> +
> + conf-pull-up {
> + pins = "MIO20", "MIO32";
> + bias-disable;
> + };
> + };
> +
> pinctrl_sdhci0_default: sdhci0-default {
> mux {
> groups = "sdio0_2_grp";
>
Applied.
M
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2021-02-03 7:00 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2021-02-01 13:30 [PATCH] ARM: dts: ebaz4205: add pinctrl entries for switches Michael Walle
2021-02-03 6:58 ` Michal Simek
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).