From: Martina Krasteva <martinax.krasteva@linux.intel.com>
To: linux-media@vger.kernel.org
Cc: mchehab@kernel.org, robh+dt@kernel.org,
devicetree@vger.kernel.org, sakari.ailus@linux.intel.com,
daniele.alessandrelli@linux.intel.com,
paul.j.murphy@linux.intel.com,
gjorgjix.rosikopulos@linux.intel.com,
martinax.krasteva@linux.intel.com
Subject: [PATCH v7 0/2] IMX334 Camera Sensor Driver
Date: Wed, 3 Feb 2021 13:54:39 +0000 [thread overview]
Message-ID: <20210203135441.136-1-martinax.krasteva@linux.intel.com> (raw)
From: Martina Krasteva <martinax.krasteva@intel.com>
Hello,
This patch series contains Sony imx334 sensor driver and device tree binding document.
A v4l2 sub-device driver for the Sony imx334 image sensor is added.
This is a camera sensor using the i2c bus for control and the
csi-2 bus for data.
The following features are supported:
- manual exposure and analog gain control support
- vblank/hblank/pixel rate control support
- supported resolution:
- 3840x2160 @ 60fps
- supported bayer order output:
- SRGGB12
v1: https://patchwork.kernel.org/project/linux-media/list/?series=388393
v1->v2:
- dt-bindings doc fixes
- minor cosmetic changes
- improvement in write_reg()
- set all media bus format fields to pass v4l2-compliance test
- remove link_validate from source entity
v2: https://patchwork.kernel.org/project/linux-media/list/?series=396393
v2->v3:
- small cosmetic changes
v3: https://patchwork.kernel.org/project/linux-media/list/?series=397689
v3->v4:
- fix read/write_reg() functions
v4: https://patchwork.kernel.org/project/linux-media/list/?series=400459
v4->v5:
- add link-frequencies in dt-bindings doc
- edit required properties in db-bindings doc
- fix data_buf overrun in read_reg()
- add function to parse dt configuration
- allow cahnging vblank in power off state
- change lpfr and ppln with vblank and hblank in mode description
v5: https://patchwork.kernel.org/project/linux-media/list/?series=425541
v5->v6:
- declare imx334_parse_hw_config() as static function
v6: https://patchwork.kernel.org/project/linux-media/list/?series=426171
v6->v7:
- add clocks and reset-gpios in dt-bindings doc
- fix error handling in imx334_set_pad_format()
- add LINK_FREQ ctrl
- do not specify a clock name in devm_clk_get()
Best Regards,
Martina
Martina Krasteva (2):
dt-bindings: media: Add bindings for imx334
media: i2c: Add imx334 camera sensor driver
.../devicetree/bindings/media/i2c/sony,imx334.yaml | 90 ++
MAINTAINERS | 9 +
drivers/media/i2c/Kconfig | 14 +
drivers/media/i2c/Makefile | 1 +
drivers/media/i2c/imx334.c | 1131 ++++++++++++++++++++
5 files changed, 1245 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/i2c/sony,imx334.yaml
create mode 100644 drivers/media/i2c/imx334.c
base-commit: fb2a9c3209872b6e65661e3737f2767832a42973
--
2.11.0
next reply other threads:[~2021-02-03 13:56 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-02-03 13:54 Martina Krasteva [this message]
2021-02-03 13:54 ` [PATCH v7 1/2] dt-bindings: media: Add bindings for imx334 Martina Krasteva
2021-02-04 15:20 ` Rob Herring
2021-02-04 16:16 ` Sakari Ailus
2021-02-04 23:06 ` Rob Herring
2021-02-05 8:35 ` Sakari Ailus
2021-02-09 22:14 ` Krzysztof Kozlowski
2021-02-03 13:54 ` [PATCH v7 2/2] media: i2c: Add imx334 camera sensor driver Martina Krasteva
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210203135441.136-1-martinax.krasteva@linux.intel.com \
--to=martinax.krasteva@linux.intel.com \
--cc=daniele.alessandrelli@linux.intel.com \
--cc=devicetree@vger.kernel.org \
--cc=gjorgjix.rosikopulos@linux.intel.com \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=paul.j.murphy@linux.intel.com \
--cc=robh+dt@kernel.org \
--cc=sakari.ailus@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).