* [PATCH V2 1/5] arm64: dts: broadcom: bcm4908: describe USB PHY
@ 2021-02-19 5:50 Rafał Miłecki
2021-02-19 5:50 ` [PATCH V2 2/5] arm64: dts: broadcom: bcm4908: describe Ethernet controller Rafał Miłecki
` (4 more replies)
0 siblings, 5 replies; 11+ messages in thread
From: Rafał Miłecki @ 2021-02-19 5:50 UTC (permalink / raw)
To: Florian Fainelli
Cc: Rob Herring, linux-arm-kernel, devicetree,
bcm-kernel-feedback-list, Rafał Miłecki
From: Rafał Miłecki <rafal@milecki.pl>
BCM4908 uses slightly modified STB family USB PHY. It handles OHCI/EHCI
and XHCI. It requires powering up using the PMB.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
---
.../bcm4908/bcm4906-netgear-r8000p.dts | 17 +++++++++++++
.../bcm4908/bcm4908-asus-gt-ac5300.dts | 17 +++++++++++++
.../boot/dts/broadcom/bcm4908/bcm4908.dtsi | 25 ++++++++++++++++---
3 files changed, 55 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts
index ee3ed612274c..bf0d534ace2e 100644
--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts
+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts
@@ -26,6 +26,23 @@ wps {
};
};
+&usb_phy {
+ brcm,ioc = <1>;
+ status = "okay";
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
+
+&xhci {
+ status = "okay";
+};
+
&nandcs {
nand-ecc-strength = <4>;
nand-ecc-step-size = <512>;
diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
index 6e4ad66ff536..bb06683d6acf 100644
--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
@@ -44,6 +44,23 @@ brightness {
};
};
+&usb_phy {
+ brcm,ioc = <1>;
+ status = "okay";
+};
+
+&ehci {
+ status = "okay";
+};
+
+&ohci {
+ status = "okay";
+};
+
+&xhci {
+ status = "okay";
+};
+
&ports {
port@0 {
label = "lan2";
diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
index 9354077f74cd..358958105337 100644
--- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
+++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
@@ -2,6 +2,8 @@
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/soc/bcm-pmb.h>
/dts-v1/;
@@ -110,24 +112,39 @@ soc {
#size-cells = <1>;
ranges = <0x00 0x00 0x80000000 0x281000>;
- usb@c300 {
+ usb_phy: usb-phy@c200 {
+ compatible = "brcm,bcm4908-usb-phy";
+ reg = <0xc200 0x100>;
+ reg-names = "crtl";
+ power-domains = <&pmb BCM_PMB_HOST_USB>;
+ dr_mode = "host";
+ brcm,has-xhci;
+ brcm,has-eohci;
+ #phy-cells = <1>;
+ status = "disabled";
+ };
+
+ ehci: usb@c300 {
compatible = "generic-ehci";
reg = <0xc300 0x100>;
interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&usb_phy PHY_TYPE_USB2>;
status = "disabled";
};
- usb@c400 {
+ ohci: usb@c400 {
compatible = "generic-ohci";
reg = <0xc400 0x100>;
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&usb_phy PHY_TYPE_USB2>;
status = "disabled";
};
- usb@d000 {
+ xhci: usb@d000 {
compatible = "generic-xhci";
reg = <0xd000 0x8c8>;
interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&usb_phy PHY_TYPE_USB3>;
status = "disabled";
};
@@ -222,7 +239,7 @@ procmon: syscon@280000 {
#address-cells = <1>;
#size-cells = <1>;
- power-controller@2800c0 {
+ pmb: power-controller@2800c0 {
compatible = "brcm,bcm4908-pmb";
reg = <0x2800c0 0x40>;
#power-domain-cells = <1>;
--
2.26.2
^ permalink raw reply related [flat|nested] 11+ messages in thread* [PATCH V2 2/5] arm64: dts: broadcom: bcm4908: describe Ethernet controller 2021-02-19 5:50 [PATCH V2 1/5] arm64: dts: broadcom: bcm4908: describe USB PHY Rafał Miłecki @ 2021-02-19 5:50 ` Rafał Miłecki 2021-03-08 22:11 ` Florian Fainelli 2021-02-19 5:50 ` [PATCH V2 3/5] arm64: dts: broadcom: bcm4908: describe Netgear R8000P switch Rafał Miłecki ` (3 subsequent siblings) 4 siblings, 1 reply; 11+ messages in thread From: Rafał Miłecki @ 2021-02-19 5:50 UTC (permalink / raw) To: Florian Fainelli Cc: Rob Herring, linux-arm-kernel, devicetree, bcm-kernel-feedback-list, Rafał Miłecki From: Rafał Miłecki <rafal@milecki.pl> BCM4908 SoCs have an integrated Ethernet controller. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> --- V2: Drop redundant brcm,use-bcm-hdr --- .../boot/dts/broadcom/bcm4908/bcm4908.dtsi | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi index 358958105337..bdbf94f3348a 100644 --- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi +++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi @@ -112,6 +112,14 @@ soc { #size-cells = <1>; ranges = <0x00 0x00 0x80000000 0x281000>; + enet: ethernet@2000 { + compatible = "brcm,bcm4908-enet"; + reg = <0x2000 0x1000>; + + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "rx"; + }; + usb_phy: usb-phy@c200 { compatible = "brcm,bcm4908-usb-phy"; reg = <0xc200 0x100>; @@ -199,6 +207,17 @@ port@3 { phy-mode = "internal"; phy-handle = <&phy11>; }; + + port@8 { + reg = <8>; + phy-mode = "internal"; + ethernet = <&enet>; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; }; }; -- 2.26.2 ^ permalink raw reply related [flat|nested] 11+ messages in thread
* Re: [PATCH V2 2/5] arm64: dts: broadcom: bcm4908: describe Ethernet controller 2021-02-19 5:50 ` [PATCH V2 2/5] arm64: dts: broadcom: bcm4908: describe Ethernet controller Rafał Miłecki @ 2021-03-08 22:11 ` Florian Fainelli 0 siblings, 0 replies; 11+ messages in thread From: Florian Fainelli @ 2021-03-08 22:11 UTC (permalink / raw) To: bcm-kernel-feedback-list, Rafał Miłecki Cc: Rob Herring, linux-arm-kernel, devicetree, Rafał Miłecki On Fri, 19 Feb 2021 06:50:27 +0100, Rafał Miłecki <zajec5@gmail.com> wrote: > From: Rafał Miłecki <rafal@milecki.pl> > > BCM4908 SoCs have an integrated Ethernet controller. > > Signed-off-by: Rafał Miłecki <rafal@milecki.pl> > --- Applied to devicetree-arm64/next, thanks! -- Florian ^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH V2 3/5] arm64: dts: broadcom: bcm4908: describe Netgear R8000P switch 2021-02-19 5:50 [PATCH V2 1/5] arm64: dts: broadcom: bcm4908: describe USB PHY Rafał Miłecki 2021-02-19 5:50 ` [PATCH V2 2/5] arm64: dts: broadcom: bcm4908: describe Ethernet controller Rafał Miłecki @ 2021-02-19 5:50 ` Rafał Miłecki 2021-03-08 22:12 ` Florian Fainelli 2021-02-19 5:50 ` [PATCH V2 4/5] arm64: dts: broadcom: bcm4908: add remaining Netgear R8000P LEDs Rafał Miłecki ` (2 subsequent siblings) 4 siblings, 1 reply; 11+ messages in thread From: Rafał Miłecki @ 2021-02-19 5:50 UTC (permalink / raw) To: Florian Fainelli Cc: Rob Herring, linux-arm-kernel, devicetree, bcm-kernel-feedback-list, Rafał Miłecki From: Rafał Miłecki <rafal@milecki.pl> R8000P model has 4 LAN ports and 1 WAN port. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> --- .../bcm4908/bcm4906-netgear-r8000p.dts | 25 +++++++++++++++++++ 1 file changed, 25 insertions(+) diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts index bf0d534ace2e..af2616e82e83 100644 --- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts +++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts @@ -43,6 +43,31 @@ &xhci { status = "okay"; }; +&ports { + port@0 { + label = "lan4"; + }; + + port@1 { + label = "lan3"; + }; + + port@2 { + label = "lan2"; + }; + + port@3 { + label = "lan1"; + }; + + port@7 { + reg = <7>; + phy-mode = "internal"; + phy-handle = <&phy12>; + label = "wan"; + }; +}; + &nandcs { nand-ecc-strength = <4>; nand-ecc-step-size = <512>; -- 2.26.2 ^ permalink raw reply related [flat|nested] 11+ messages in thread
* Re: [PATCH V2 3/5] arm64: dts: broadcom: bcm4908: describe Netgear R8000P switch 2021-02-19 5:50 ` [PATCH V2 3/5] arm64: dts: broadcom: bcm4908: describe Netgear R8000P switch Rafał Miłecki @ 2021-03-08 22:12 ` Florian Fainelli 0 siblings, 0 replies; 11+ messages in thread From: Florian Fainelli @ 2021-03-08 22:12 UTC (permalink / raw) To: bcm-kernel-feedback-list, Rafał Miłecki Cc: Rob Herring, linux-arm-kernel, devicetree, Rafał Miłecki On Fri, 19 Feb 2021 06:50:28 +0100, Rafał Miłecki <zajec5@gmail.com> wrote: > From: Rafał Miłecki <rafal@milecki.pl> > > R8000P model has 4 LAN ports and 1 WAN port. > > Signed-off-by: Rafał Miłecki <rafal@milecki.pl> > --- Applied to devicetree-arm64/next, thanks! -- Florian ^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH V2 4/5] arm64: dts: broadcom: bcm4908: add remaining Netgear R8000P LEDs 2021-02-19 5:50 [PATCH V2 1/5] arm64: dts: broadcom: bcm4908: describe USB PHY Rafał Miłecki 2021-02-19 5:50 ` [PATCH V2 2/5] arm64: dts: broadcom: bcm4908: describe Ethernet controller Rafał Miłecki 2021-02-19 5:50 ` [PATCH V2 3/5] arm64: dts: broadcom: bcm4908: describe Netgear R8000P switch Rafał Miłecki @ 2021-02-19 5:50 ` Rafał Miłecki 2021-03-08 22:12 ` Florian Fainelli 2021-03-09 22:54 ` Florian Fainelli 2021-02-19 5:50 ` [PATCH V2 5/5] arm64: dts: broadcom: bcm4908: describe firmware partitions Rafał Miłecki 2021-03-08 22:11 ` [PATCH V2 1/5] arm64: dts: broadcom: bcm4908: describe USB PHY Florian Fainelli 4 siblings, 2 replies; 11+ messages in thread From: Rafał Miłecki @ 2021-02-19 5:50 UTC (permalink / raw) To: Florian Fainelli Cc: Rob Herring, linux-arm-kernel, devicetree, bcm-kernel-feedback-list, Rafał Miłecki From: Rafał Miłecki <rafal@milecki.pl> There are a few more GPIO connected LEDs there didn't get described initially. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> --- .../bcm4908/bcm4906-netgear-r8000p.dts | 48 +++++++++++++++++++ 1 file changed, 48 insertions(+) diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts index af2616e82e83..0d02986c80ab 100644 --- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts +++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts @@ -18,11 +18,59 @@ memory@0 { leds { compatible = "gpio-leds"; + power-white { + function = LED_FUNCTION_POWER; + color = <LED_COLOR_ID_WHITE>; + gpios = <&gpio0 8 GPIO_ACTIVE_LOW>; + }; + + power-amber { + function = LED_FUNCTION_POWER; + color = <LED_COLOR_ID_AMBER>; + gpios = <&gpio0 9 GPIO_ACTIVE_LOW>; + }; + wps { function = LED_FUNCTION_WPS; color = <LED_COLOR_ID_WHITE>; gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; }; + + 2ghz { + function = "2ghz"; + color = <LED_COLOR_ID_WHITE>; + gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; + }; + + 5ghz-1 { + function = "5ghz-1"; + color = <LED_COLOR_ID_WHITE>; + gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; + }; + + 5ghz-2 { + function = "5ghz-2"; + color = <LED_COLOR_ID_WHITE>; + gpios = <&gpio0 16 GPIO_ACTIVE_LOW>; + }; + + usb2 { + function = "usb2"; + color = <LED_COLOR_ID_WHITE>; + gpios = <&gpio0 17 GPIO_ACTIVE_LOW>; + }; + + usb3 { + function = "usb3"; + color = <LED_COLOR_ID_WHITE>; + gpios = <&gpio0 18 GPIO_ACTIVE_LOW>; + }; + + wifi { + function = "wifi"; + color = <LED_COLOR_ID_WHITE>; + gpios = <&gpio0 56 GPIO_ACTIVE_LOW>; + }; }; }; -- 2.26.2 ^ permalink raw reply related [flat|nested] 11+ messages in thread
* Re: [PATCH V2 4/5] arm64: dts: broadcom: bcm4908: add remaining Netgear R8000P LEDs 2021-02-19 5:50 ` [PATCH V2 4/5] arm64: dts: broadcom: bcm4908: add remaining Netgear R8000P LEDs Rafał Miłecki @ 2021-03-08 22:12 ` Florian Fainelli 2021-03-09 22:54 ` Florian Fainelli 1 sibling, 0 replies; 11+ messages in thread From: Florian Fainelli @ 2021-03-08 22:12 UTC (permalink / raw) To: bcm-kernel-feedback-list, Rafał Miłecki Cc: Rob Herring, linux-arm-kernel, devicetree, Rafał Miłecki On Fri, 19 Feb 2021 06:50:29 +0100, Rafał Miłecki <zajec5@gmail.com> wrote: > From: Rafał Miłecki <rafal@milecki.pl> > > There are a few more GPIO connected LEDs there didn't get described > initially. > > Signed-off-by: Rafał Miłecki <rafal@milecki.pl> > --- Applied to devicetree-arm64/next, thanks! -- Florian ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH V2 4/5] arm64: dts: broadcom: bcm4908: add remaining Netgear R8000P LEDs 2021-02-19 5:50 ` [PATCH V2 4/5] arm64: dts: broadcom: bcm4908: add remaining Netgear R8000P LEDs Rafał Miłecki 2021-03-08 22:12 ` Florian Fainelli @ 2021-03-09 22:54 ` Florian Fainelli 1 sibling, 0 replies; 11+ messages in thread From: Florian Fainelli @ 2021-03-09 22:54 UTC (permalink / raw) To: Rafał Miłecki, Florian Fainelli Cc: Rob Herring, linux-arm-kernel, devicetree, bcm-kernel-feedback-list, Rafał Miłecki On 2/18/21 9:50 PM, Rafał Miłecki wrote: > From: Rafał Miłecki <rafal@milecki.pl> > > There are a few more GPIO connected LEDs there didn't get described > initially. > > Signed-off-by: Rafał Miłecki <rafal@milecki.pl> > --- > .../bcm4908/bcm4906-netgear-r8000p.dts | 48 +++++++++++++++++++ > 1 file changed, 48 insertions(+) > > diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts > index af2616e82e83..0d02986c80ab 100644 > --- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts > +++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts Can you send me a fixup patch to fix the following warnings: +arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dt.yaml: leds: '2ghz', '5ghz-1', '5ghz-2' do not match any of the regexes: '.*-names$', '.*-supply$', '^#.*-cells$', '^#[a-zA-Z0-9,+\\-._]{0,63}$', '^[a-zA-Z][a-zA-Z0-9,+\\-._]{0,63}$', '^[a-zA-Z][a-zA-Z0-9,+\\-._]{0,63}@[0-9a-fA-F]+(,[0-9a-fA-F]+)*$', '^__.*__$', 'pinctrl-[0-9]+' +arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dt.yaml: leds: '2ghz', '5ghz-1', '5ghz-2', 'power-amber', 'power-white', 'usb2', 'usb3', 'wifi', 'wps' do not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+' -arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dt.yaml: leds: 'wps' does not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+' -- Florian ^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH V2 5/5] arm64: dts: broadcom: bcm4908: describe firmware partitions 2021-02-19 5:50 [PATCH V2 1/5] arm64: dts: broadcom: bcm4908: describe USB PHY Rafał Miłecki ` (2 preceding siblings ...) 2021-02-19 5:50 ` [PATCH V2 4/5] arm64: dts: broadcom: bcm4908: add remaining Netgear R8000P LEDs Rafał Miłecki @ 2021-02-19 5:50 ` Rafał Miłecki 2021-03-08 22:12 ` Florian Fainelli 2021-03-08 22:11 ` [PATCH V2 1/5] arm64: dts: broadcom: bcm4908: describe USB PHY Florian Fainelli 4 siblings, 1 reply; 11+ messages in thread From: Rafał Miłecki @ 2021-02-19 5:50 UTC (permalink / raw) To: Florian Fainelli Cc: Rob Herring, linux-arm-kernel, devicetree, bcm-kernel-feedback-list, Rafał Miłecki From: Rafał Miłecki <rafal@milecki.pl> BCM4908 bootloader supports multiple firmware partitions and has its own bindings defined for them. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> --- .../dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts | 1 + .../dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts | 12 +++++++++++- 2 files changed, 12 insertions(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts index 0d02986c80ab..7b24ad365a3c 100644 --- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts +++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts @@ -135,6 +135,7 @@ partition@0 { }; partition@100000 { + compatible = "brcm,bcm4908-firmware"; label = "firmware"; reg = <0x100000 0x4400000>; }; diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts index bb06683d6acf..7240a9ee9812 100644 --- a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts +++ b/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts @@ -122,7 +122,7 @@ &nandcs { #size-cells = <0>; partitions { - compatible = "fixed-partitions"; + compatible = "brcm,bcm4908-partitions"; #address-cells = <1>; #size-cells = <1>; @@ -130,5 +130,15 @@ partition@0 { label = "cferom"; reg = <0x0 0x100000>; }; + + partition@100000 { + compatible = "brcm,bcm4908-firmware"; + reg = <0x100000 0x5700000>; + }; + + partition@5800000 { + compatible = "brcm,bcm4908-firmware"; + reg = <0x5800000 0x5700000>; + }; }; }; -- 2.26.2 ^ permalink raw reply related [flat|nested] 11+ messages in thread
* Re: [PATCH V2 5/5] arm64: dts: broadcom: bcm4908: describe firmware partitions 2021-02-19 5:50 ` [PATCH V2 5/5] arm64: dts: broadcom: bcm4908: describe firmware partitions Rafał Miłecki @ 2021-03-08 22:12 ` Florian Fainelli 0 siblings, 0 replies; 11+ messages in thread From: Florian Fainelli @ 2021-03-08 22:12 UTC (permalink / raw) To: bcm-kernel-feedback-list, Rafał Miłecki Cc: Rob Herring, linux-arm-kernel, devicetree, Rafał Miłecki On Fri, 19 Feb 2021 06:50:30 +0100, Rafał Miłecki <zajec5@gmail.com> wrote: > From: Rafał Miłecki <rafal@milecki.pl> > > BCM4908 bootloader supports multiple firmware partitions and has its own > bindings defined for them. > > Signed-off-by: Rafał Miłecki <rafal@milecki.pl> > --- Applied to devicetree-arm64/next, thanks! -- Florian ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH V2 1/5] arm64: dts: broadcom: bcm4908: describe USB PHY 2021-02-19 5:50 [PATCH V2 1/5] arm64: dts: broadcom: bcm4908: describe USB PHY Rafał Miłecki ` (3 preceding siblings ...) 2021-02-19 5:50 ` [PATCH V2 5/5] arm64: dts: broadcom: bcm4908: describe firmware partitions Rafał Miłecki @ 2021-03-08 22:11 ` Florian Fainelli 4 siblings, 0 replies; 11+ messages in thread From: Florian Fainelli @ 2021-03-08 22:11 UTC (permalink / raw) To: bcm-kernel-feedback-list, Rafał Miłecki Cc: Rob Herring, linux-arm-kernel, devicetree, Rafał Miłecki On Fri, 19 Feb 2021 06:50:26 +0100, Rafał Miłecki <zajec5@gmail.com> wrote: > From: Rafał Miłecki <rafal@milecki.pl> > > BCM4908 uses slightly modified STB family USB PHY. It handles OHCI/EHCI > and XHCI. It requires powering up using the PMB. > > Signed-off-by: Rafał Miłecki <rafal@milecki.pl> > --- Applied to devicetree-arm64/next, thanks! -- Florian ^ permalink raw reply [flat|nested] 11+ messages in thread
end of thread, other threads:[~2021-03-09 22:55 UTC | newest] Thread overview: 11+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2021-02-19 5:50 [PATCH V2 1/5] arm64: dts: broadcom: bcm4908: describe USB PHY Rafał Miłecki 2021-02-19 5:50 ` [PATCH V2 2/5] arm64: dts: broadcom: bcm4908: describe Ethernet controller Rafał Miłecki 2021-03-08 22:11 ` Florian Fainelli 2021-02-19 5:50 ` [PATCH V2 3/5] arm64: dts: broadcom: bcm4908: describe Netgear R8000P switch Rafał Miłecki 2021-03-08 22:12 ` Florian Fainelli 2021-02-19 5:50 ` [PATCH V2 4/5] arm64: dts: broadcom: bcm4908: add remaining Netgear R8000P LEDs Rafał Miłecki 2021-03-08 22:12 ` Florian Fainelli 2021-03-09 22:54 ` Florian Fainelli 2021-02-19 5:50 ` [PATCH V2 5/5] arm64: dts: broadcom: bcm4908: describe firmware partitions Rafał Miłecki 2021-03-08 22:12 ` Florian Fainelli 2021-03-08 22:11 ` [PATCH V2 1/5] arm64: dts: broadcom: bcm4908: describe USB PHY Florian Fainelli
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).