From: Sebastian Reichel <sebastian.reichel@collabora.com>
To: Sebastian Reichel <sebastian.reichel@collabora.com>,
Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>,
NXP Linux Team <linux-imx@nxp.com>
Cc: Rob Herring <robh+dt@kernel.org>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, kernel@collabora.com
Subject: [PATCHv1 1/4] ARM: dts: imx: ba16: add USB OTG VBUS enable GPIO
Date: Tue, 23 Feb 2021 19:33:43 +0100 [thread overview]
Message-ID: <20210223183346.138575-2-sebastian.reichel@collabora.com> (raw)
In-Reply-To: <20210223183346.138575-1-sebastian.reichel@collabora.com>
Add VBUS regulator GPIO information, so that USB OTG port can
also be used in host mode.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
arch/arm/boot/dts/imx6q-ba16.dtsi | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/arch/arm/boot/dts/imx6q-ba16.dtsi b/arch/arm/boot/dts/imx6q-ba16.dtsi
index e4578ed3371e..4793ef5171aa 100644
--- a/arch/arm/boot/dts/imx6q-ba16.dtsi
+++ b/arch/arm/boot/dts/imx6q-ba16.dtsi
@@ -124,6 +124,10 @@ reg_usb_otg_vbus: regulator-usbotgvbus {
regulator-name = "usb_otg_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
+
+ pinctrl-0 = <&pinctrl_usbotg_vbus>;
+ gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
};
};
@@ -575,6 +579,12 @@ MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
>;
};
+ pinctrl_usbotg_vbus: usbotgvbusgrp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x000b0
+ >;
+ };
+
pinctrl_usdhc2: usdhc2grp {
fsl,pins = <
MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059
--
2.30.0
next prev parent reply other threads:[~2021-02-23 18:34 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-02-23 18:33 [PATCHv1 0/4] Bx50v3 DT improvements Sebastian Reichel
2021-02-23 18:33 ` Sebastian Reichel [this message]
2021-03-08 0:35 ` [PATCHv1 1/4] ARM: dts: imx: ba16: add USB OTG VBUS enable GPIO Shawn Guo
2021-02-23 18:33 ` [PATCHv1 2/4] ARM: dts: imx: ba16: improve PHY information Sebastian Reichel
2021-03-08 0:38 ` Shawn Guo
2021-02-23 18:33 ` [PATCHv1 3/4] ARM: dts: imx: bx50v3: i2c GPIOs are open drain Sebastian Reichel
2021-02-23 18:33 ` [PATCHv1 4/4] ARM: dts: imx: bx50v3: Define GPIO line names Sebastian Reichel
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210223183346.138575-2-sebastian.reichel@collabora.com \
--to=sebastian.reichel@collabora.com \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=kernel@collabora.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).