From: Shawn Guo <shawnguo@kernel.org>
To: Dong Aisheng <aisheng.dong@nxp.com>
Cc: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
dongas86@gmail.com, kernel@pengutronix.de, robh+dt@kernel.org,
linux-imx@nxp.com, jan.kiszka@siemens.com
Subject: Re: [PATCH v5 00/18] arm64: dts: imx8: architecture improvement and adding imx8qm support
Date: Mon, 8 Mar 2021 09:59:49 +0800 [thread overview]
Message-ID: <20210308015949.GZ543@dragon> (raw)
In-Reply-To: <1614950268-22073-1-git-send-email-aisheng.dong@nxp.com>
On Fri, Mar 05, 2021 at 09:17:29PM +0800, Dong Aisheng wrote:
> IMX SCU based platforms (e.g. MX8QM/MX8QXP) are comprised of a number of SS
> (Subsystems), those SS may be shared between different SoCs while most of them
> can be reused like Devices Resources, Clocks, Power domains and etc.
>
> This patch series aims to improve the MX8 architecture to comply with the HW
> design to save a lot of duplicated codes and benefits us a better
> maintainability and scalability in the future.
>
> ChangeLog:
> v5:
> * rebase to latest shawn/for-next
> * make mx8qm usdhc compatible with imx8qxp
> v4-resend:
> * no change except put three module binding patches first which are used
> by this patchset.
> v3->v4:
> * mainly rebase to latest kernel except a few very minor changes like change to use
> new scu protocol binding which was not supported in last version
> v2->v3:
> * use clock-indices property instead of bit-offset property suggested by Shawn Guo
> * rebase to latest shawn/for-next
> v1->v2:
> * change to the new two cells scu clock binding, so original adding scu clocks
> patches were removed.
> * Move scu pd node above clk node
>
>
> Dong Aisheng (18):
> dt-bindings: arm: fsl: add imx8qm boards compatible string
> dt-bindings: mailbox: mu: add imx8qm support
> arm64: dts: imx8qxp: add fallback compatible string for scu pd
> arm64: dts: imx8qxp: move scu pd node before scu clock node
> arm64: dts: imx8qxp: orginize dts in subsystems
The dts patches stop applying for me at this one. Please rebase and
resend them.
Shawn
> arm64: dts: imx8: add lsio lpcg clocks
> arm64: dts: imx8: add conn lpcg clocks
> arm64: dts: imx8: add adma lpcg clocks
> arm64: dts: imx8: switch to two cell scu clock binding
> arm64: dts: imx8: switch to new lpcg clock binding
> arm64: dts: imx8qm: add lsio ss support
> arm64: dts: imx8qm: add conn ss support
> arm64: dts: imx8: split adma ss into dma and audio ss
> arm64: dts: imx8qm: add dma ss support
> arm64: dts: imx: add imx8qm common dts file
> arm64: dts: imx: add imx8qm mek support
> arm64: defconfig: add imx8qm mek support
> firmware: imx: scu-pd: do not power off console domain
>
> .../devicetree/bindings/arm/fsl.yaml | 6 +
> .../devicetree/bindings/mailbox/fsl,mu.yaml | 5 +-
> arch/arm64/boot/dts/freescale/Makefile | 1 +
> .../boot/dts/freescale/imx8-ss-adma.dtsi | 8 +
> .../boot/dts/freescale/imx8-ss-audio.dtsi | 68 +++
> .../boot/dts/freescale/imx8-ss-conn.dtsi | 184 ++++++++
> .../arm64/boot/dts/freescale/imx8-ss-ddr.dtsi | 18 +
> .../arm64/boot/dts/freescale/imx8-ss-dma.dtsi | 202 +++++++++
> .../boot/dts/freescale/imx8-ss-lsio.dtsi | 311 +++++++++++++
> arch/arm64/boot/dts/freescale/imx8qm-mek.dts | 144 ++++++
> .../boot/dts/freescale/imx8qm-ss-conn.dtsi | 21 +
> .../boot/dts/freescale/imx8qm-ss-dma.dtsi | 51 +++
> .../boot/dts/freescale/imx8qm-ss-lsio.dtsi | 61 +++
> arch/arm64/boot/dts/freescale/imx8qm.dtsi | 176 ++++++++
> .../boot/dts/freescale/imx8qxp-ai_ml.dts | 20 +-
> .../freescale/imx8qxp-colibri-eval-v3.dtsi | 8 +-
> .../boot/dts/freescale/imx8qxp-colibri.dtsi | 12 +-
> arch/arm64/boot/dts/freescale/imx8qxp-mek.dts | 50 +--
> .../boot/dts/freescale/imx8qxp-ss-adma.dtsi | 37 ++
> .../boot/dts/freescale/imx8qxp-ss-conn.dtsi | 25 ++
> .../boot/dts/freescale/imx8qxp-ss-lsio.dtsi | 61 +++
> arch/arm64/boot/dts/freescale/imx8qxp.dtsi | 423 ++----------------
> arch/arm64/configs/defconfig | 1 +
> drivers/firmware/imx/scu-pd.c | 28 +-
> 24 files changed, 1481 insertions(+), 440 deletions(-)
> create mode 100644 arch/arm64/boot/dts/freescale/imx8-ss-adma.dtsi
> create mode 100644 arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi
> create mode 100644 arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi
> create mode 100644 arch/arm64/boot/dts/freescale/imx8-ss-ddr.dtsi
> create mode 100644 arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
> create mode 100644 arch/arm64/boot/dts/freescale/imx8-ss-lsio.dtsi
> create mode 100644 arch/arm64/boot/dts/freescale/imx8qm-mek.dts
> create mode 100644 arch/arm64/boot/dts/freescale/imx8qm-ss-conn.dtsi
> create mode 100644 arch/arm64/boot/dts/freescale/imx8qm-ss-dma.dtsi
> create mode 100644 arch/arm64/boot/dts/freescale/imx8qm-ss-lsio.dtsi
> create mode 100644 arch/arm64/boot/dts/freescale/imx8qm.dtsi
> create mode 100644 arch/arm64/boot/dts/freescale/imx8qxp-ss-adma.dtsi
> create mode 100644 arch/arm64/boot/dts/freescale/imx8qxp-ss-conn.dtsi
> create mode 100644 arch/arm64/boot/dts/freescale/imx8qxp-ss-lsio.dtsi
>
> --
> 2.25.1
>
next prev parent reply other threads:[~2021-03-08 2:00 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-05 13:17 [PATCH v5 00/18] arm64: dts: imx8: architecture improvement and adding imx8qm support Dong Aisheng
2021-03-05 13:17 ` [PATCH v5 01/18] dt-bindings: arm: fsl: add imx8qm boards compatible string Dong Aisheng
2021-03-08 1:40 ` Shawn Guo
2021-03-05 13:17 ` [PATCH 1/1] firmware: imx: scu-pd: do not power off console domain Dong Aisheng
2021-03-05 13:33 ` Aisheng Dong
2021-03-05 13:17 ` [PATCH v5 02/18] dt-bindings: mailbox: mu: add imx8qm support Dong Aisheng
2021-03-08 1:40 ` Shawn Guo
2021-03-05 13:17 ` [PATCH v5 03/18] arm64: dts: imx8qxp: add fallback compatible string for scu pd Dong Aisheng
2021-03-05 13:17 ` [PATCH v5 04/18] arm64: dts: imx8qxp: move scu pd node before scu clock node Dong Aisheng
2021-03-05 13:17 ` [PATCH v5 05/18] arm64: dts: imx8qxp: orginize dts in subsystems Dong Aisheng
2021-03-05 13:17 ` [PATCH v5 06/18] arm64: dts: imx8: add lsio lpcg clocks Dong Aisheng
2021-03-05 13:17 ` [PATCH v5 07/18] arm64: dts: imx8: add conn " Dong Aisheng
2021-03-05 13:17 ` [PATCH v5 08/18] arm64: dts: imx8: add adma " Dong Aisheng
2021-03-05 13:17 ` [PATCH v5 09/18] arm64: dts: imx8: switch to two cell scu clock binding Dong Aisheng
2021-03-05 13:17 ` [PATCH v5 10/18] arm64: dts: imx8: switch to new lpcg " Dong Aisheng
2021-03-05 13:17 ` [PATCH v5 11/18] arm64: dts: imx8qm: add lsio ss support Dong Aisheng
2021-03-05 13:17 ` [PATCH v5 12/18] arm64: dts: imx8qm: add conn " Dong Aisheng
2021-03-05 13:17 ` [PATCH v5 13/18] arm64: dts: imx8: split adma ss into dma and audio ss Dong Aisheng
2021-03-05 13:17 ` [PATCH v5 14/18] arm64: dts: imx8qm: add dma ss support Dong Aisheng
2021-03-05 13:17 ` [PATCH v5 15/18] arm64: dts: imx: add imx8qm common dts file Dong Aisheng
2021-03-05 13:17 ` [PATCH v5 16/18] arm64: dts: imx: add imx8qm mek support Dong Aisheng
2021-03-05 13:17 ` [PATCH v5 17/18] arm64: defconfig: " Dong Aisheng
2021-03-08 1:44 ` Shawn Guo
2021-03-05 13:17 ` [PATCH v5 18/18] firmware: imx: scu-pd: do not power off console domain Dong Aisheng
2021-03-08 1:45 ` Shawn Guo
2021-03-08 1:59 ` Shawn Guo [this message]
2021-03-08 2:29 ` [PATCH v5 00/18] arm64: dts: imx8: architecture improvement and adding imx8qm support Aisheng Dong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210308015949.GZ543@dragon \
--to=shawnguo@kernel.org \
--cc=aisheng.dong@nxp.com \
--cc=devicetree@vger.kernel.org \
--cc=dongas86@gmail.com \
--cc=jan.kiszka@siemens.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).