From: Robert Hancock <robert.hancock@calian.com>
To: mturquette@baylibre.com, sboyd@kernel.org
Cc: mike.looijmans@topic.nl, devicetree@vger.kernel.org,
linux-clk@vger.kernel.org,
Robert Hancock <robert.hancock@calian.com>
Subject: [PATCH 7/9] clk: si5341: Add silabs,xaxb-ext-clk property
Date: Thu, 11 Mar 2021 16:24:34 -0600 [thread overview]
Message-ID: <20210311222436.3826800-8-robert.hancock@calian.com> (raw)
In-Reply-To: <20210311222436.3826800-1-robert.hancock@calian.com>
Add a property to allow specifying that the device XA/XB pins are used for
an external clock input rather than for a clock crystal.
Signed-off-by: Robert Hancock <robert.hancock@calian.com>
---
drivers/clk/clk-si5341.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/drivers/clk/clk-si5341.c b/drivers/clk/clk-si5341.c
index f01a20fdf005..11740855bcde 100644
--- a/drivers/clk/clk-si5341.c
+++ b/drivers/clk/clk-si5341.c
@@ -80,6 +80,7 @@ struct clk_si5341 {
u8 num_outputs;
u8 num_synth;
u16 chip_id;
+ bool xaxb_ext_clk;
};
#define to_clk_si5341(_hw) container_of(_hw, struct clk_si5341, hw)
@@ -529,9 +530,11 @@ static int si5341_clk_reparent(struct clk_si5341 *data, u8 index)
if (err < 0)
return err;
- /* Power up XTAL oscillator and buffer */
+ /* Power up XTAL oscillator and buffer, select clock mode */
err = regmap_update_bits(data->regmap, SI5341_XAXB_CFG,
- SI5341_XAXB_CFG_PDNB, SI5341_XAXB_CFG_PDNB);
+ SI5341_XAXB_CFG_PDNB | SI5341_XAXB_CFG_EXTCLK_EN,
+ SI5341_XAXB_CFG_PDNB | (data->xaxb_ext_clk ?
+ SI5341_XAXB_CFG_EXTCLK_EN : 0));
if (err < 0)
return err;
}
@@ -1560,6 +1563,8 @@ static int si5341_probe(struct i2c_client *client,
initialization_required = !err;
}
+ data->xaxb_ext_clk = of_property_read_bool(client->dev.of_node,
+ "silabs,xaxb-ext-clk");
if (initialization_required) {
/* Populate the regmap cache in preparation for "cache only" */
--
2.27.0
next prev parent reply other threads:[~2021-03-11 22:26 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-11 22:24 [PATCH 0/9] Si5341 driver updates Robert Hancock
[not found] ` <1b153bce-a66a-45ee-a5c6-963ea6fb1c82.949ef384-8293-46b8-903f-40a477c056ae.a5c64a18-101d-4705-9716-1c41c644d43a@emailsignatures365.codetwo.com>
[not found] ` <1b153bce-a66a-45ee-a5c6-963ea6fb1c82.949ef384-8293-46b8-903f-40a477c056ae.b1dc66c0-d7df-44f1-9f1a-e729e77f49c2@emailsignatures365.codetwo.com>
[not found] ` <1b153bce-a66a-45ee-a5c6-963ea6fb1c82.949ef384-8293-46b8-903f-40a477c056ae.9334a909-9494-43d0-954a-ed0ddcbb7b5d@emailsignatures365.codetwo.com>
2021-03-11 22:24 ` [PATCH 1/9] dt-bindings: clock: clk-si5341: Add new attributes Robert Hancock
2021-03-11 22:24 ` [PATCH 2/9] clk: si5341: Wait for DEVICE_READY on startup Robert Hancock
2021-03-12 6:39 ` Mike Looijmans
2021-03-12 15:23 ` Robert Hancock
2021-03-11 22:24 ` [PATCH 3/9] clk: si5341: Avoid divide errors due to bogus register contents Robert Hancock
2021-03-11 22:24 ` [PATCH 4/9] clk: si5341: Check for input clock presence and PLL lock on startup Robert Hancock
2021-03-12 6:47 ` Mike Looijmans
2021-03-12 15:23 ` Robert Hancock
2021-03-11 22:24 ` [PATCH 5/9] clk: si5341: Update initialization magic Robert Hancock
2021-03-11 22:24 ` [PATCH 6/9] clk: si5341: Allow different output VDD_SEL values Robert Hancock
2021-03-12 0:09 ` kernel test robot
2021-03-12 0:09 ` [RFC PATCH] clk: si5341: si5341_remove() can be static kernel test robot
2021-03-12 0:48 ` [PATCH 6/9] clk: si5341: Allow different output VDD_SEL values kernel test robot
2021-03-11 22:24 ` Robert Hancock [this message]
2021-03-11 22:24 ` [PATCH 8/9] clk: si5341: Add silabs,iovdd-33 property Robert Hancock
2021-03-12 6:44 ` Mike Looijmans
2021-03-12 15:39 ` Robert Hancock
2021-03-11 22:24 ` [PATCH 9/9] clk: si5341: Add sysfs properties to allow checking/resetting device faults Robert Hancock
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210311222436.3826800-8-robert.hancock@calian.com \
--to=robert.hancock@calian.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=mike.looijmans@topic.nl \
--cc=mturquette@baylibre.com \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox