From: Rob Herring <robh@kernel.org>
To: devicetree@vger.kernel.org
Cc: linux-kernel@vger.kernel.org,
Nicolas Saenz Julienne <nsaenzjulienne@suse.de>,
Maxime Ripard <mripard@kernel.org>,
Linus Walleij <linus.walleij@linaro.org>,
Bartosz Golaszewski <bgolaszewski@baylibre.com>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Krzysztof Kozlowski <krzk@kernel.org>,
Marc Kleine-Budde <mkl@pengutronix.de>,
"David S. Miller" <davem@davemloft.net>,
Jakub Kicinski <kuba@kernel.org>,
Srinivas Kandagatla <srinivas.kandagatla@linaro.org>,
Ohad Ben-Cohen <ohad@wizery.com>, Mark Brown <broonie@kernel.org>,
Cheng-Yi Chiang <cychiang@chromium.org>,
Benson Leung <bleung@chromium.org>,
Zhang Rui <rui.zhang@intel.com>,
Daniel Lezcano <daniel.lezcano@linaro.org>,
Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Stefan Wahren <wahrenst@gmx.net>,
Masahiro Yamada <yamada.masahiro@socionext.com>,
Odelu Kukatla <okukatla@codeaurora.org>,
Alex Elder <elder@kernel.org>, Suman Anna <s-anna@ti.com>,
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>,
Dmitry Baryshkov <dmitry.baryshkov@linaro.org>,
linux-gpio@vger.kernel.org, linux-pm@vger.kernel.org,
linux-can@vger.kernel.org, netdev@vger.kernel.org,
linux-remoteproc@vger.kernel.org, alsa-devel@alsa-project.org,
linux-usb@vger.kernel.org
Subject: [PATCH] dt-bindings: Drop type references on common properties
Date: Tue, 16 Mar 2021 13:48:58 -0600 [thread overview]
Message-ID: <20210316194858.3527845-1-robh@kernel.org> (raw)
Users of common properties shouldn't have a type definition as the
common schemas already have one. Drop all the unnecessary type
references in the tree.
A meta-schema update to catch these is pending.
Cc: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Cc: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Cc: Ohad Ben-Cohen <ohad@wizery.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Cheng-Yi Chiang <cychiang@chromium.org>
Cc: Benson Leung <bleung@chromium.org>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Stefan Wahren <wahrenst@gmx.net>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Odelu Kukatla <okukatla@codeaurora.org>
Cc: Alex Elder <elder@kernel.org>
Cc: Suman Anna <s-anna@ti.com>
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: linux-gpio@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Cc: linux-can@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: linux-remoteproc@vger.kernel.org
Cc: alsa-devel@alsa-project.org
Cc: linux-usb@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
---
.../bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml | 5 +----
Documentation/devicetree/bindings/arm/cpus.yaml | 2 --
.../bindings/display/allwinner,sun4i-a10-tcon.yaml | 1 -
.../devicetree/bindings/gpio/socionext,uniphier-gpio.yaml | 3 +--
.../devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml | 1 -
.../devicetree/bindings/interconnect/qcom,rpmh.yaml | 1 -
.../bindings/memory-controllers/nvidia,tegra210-emc.yaml | 2 +-
Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml | 1 -
Documentation/devicetree/bindings/net/qcom,ipa.yaml | 1 -
Documentation/devicetree/bindings/nvmem/nvmem-consumer.yaml | 2 --
.../devicetree/bindings/remoteproc/ti,omap-remoteproc.yaml | 2 +-
Documentation/devicetree/bindings/sound/ak4642.yaml | 2 --
.../devicetree/bindings/sound/google,cros-ec-codec.yaml | 2 +-
Documentation/devicetree/bindings/sound/renesas,rsnd.yaml | 1 -
.../devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml | 1 -
Documentation/devicetree/bindings/usb/usb.yaml | 1 -
16 files changed, 5 insertions(+), 23 deletions(-)
diff --git a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml
index a2c63c8b1d10..c6144c8421fa 100644
--- a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml
+++ b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml
@@ -26,10 +26,7 @@ properties:
- const: simple-mfd
mboxes:
- $ref: '/schemas/types.yaml#/definitions/phandle'
- description: |
- Phandle to the firmware device's Mailbox.
- (See: ../mailbox/mailbox.txt for more information)
+ maxItems: 1
clocks:
type: object
diff --git a/Documentation/devicetree/bindings/arm/cpus.yaml b/Documentation/devicetree/bindings/arm/cpus.yaml
index 26b886b20b27..6be4a8852ee5 100644
--- a/Documentation/devicetree/bindings/arm/cpus.yaml
+++ b/Documentation/devicetree/bindings/arm/cpus.yaml
@@ -256,13 +256,11 @@ properties:
where voltage is in V, frequency is in MHz.
power-domains:
- $ref: '/schemas/types.yaml#/definitions/phandle-array'
description:
List of phandles and PM domain specifiers, as defined by bindings of the
PM domain provider (see also ../power_domain.txt).
power-domain-names:
- $ref: '/schemas/types.yaml#/definitions/string-array'
description:
A list of power domain name strings sorted in the same order as the
power-domains property.
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml
index c13faf3e6581..3a7d5d731712 100644
--- a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml
+++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml
@@ -73,7 +73,6 @@ properties:
clock-output-names:
description:
Name of the LCD pixel clock created.
- $ref: /schemas/types.yaml#/definitions/string-array
maxItems: 1
dmas:
diff --git a/Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml b/Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml
index 1a54db04f29d..bcafa494ed7a 100644
--- a/Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml
+++ b/Documentation/devicetree/bindings/gpio/socionext,uniphier-gpio.yaml
@@ -43,8 +43,7 @@ properties:
gpio-ranges: true
- gpio-ranges-group-names:
- $ref: /schemas/types.yaml#/definitions/string-array
+ gpio-ranges-group-names: true
socionext,interrupt-ranges:
description: |
diff --git a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml
index 6f2398cdc82d..1e7894e524f9 100644
--- a/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/st,stm32-dfsdm-adc.yaml
@@ -102,7 +102,6 @@ patternProperties:
st,adc-channel-names:
description: List of single-ended channel names.
- $ref: /schemas/types.yaml#/definitions/string-array
st,filter-order:
description: |
diff --git a/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml b/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml
index 799e73cdb90b..13da7b29c707 100644
--- a/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml
+++ b/Documentation/devicetree/bindings/interconnect/qcom,rpmh.yaml
@@ -82,7 +82,6 @@ properties:
this interconnect to send RPMh commands.
qcom,bcm-voter-names:
- $ref: /schemas/types.yaml#/definitions/string-array
description: |
Names for each of the qcom,bcm-voters specified.
diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra210-emc.yaml b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra210-emc.yaml
index 49ab09252e52..bc8477e7ab19 100644
--- a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra210-emc.yaml
+++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra210-emc.yaml
@@ -34,7 +34,7 @@ properties:
- description: EMC general interrupt
memory-region:
- $ref: /schemas/types.yaml#/definitions/phandle
+ maxItems: 1
description:
phandle to a reserved memory region describing the table of EMC
frequencies trained by the firmware
diff --git a/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml b/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml
index fe6a949a2eab..55bff1586b6f 100644
--- a/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml
+++ b/Documentation/devicetree/bindings/net/can/fsl,flexcan.yaml
@@ -57,7 +57,6 @@ properties:
- const: per
clock-frequency:
- $ref: /schemas/types.yaml#/definitions/uint32
description: |
The oscillator frequency driving the flexcan device, filled in by the
boot loader. This property should only be used the used operating system
diff --git a/Documentation/devicetree/bindings/net/qcom,ipa.yaml b/Documentation/devicetree/bindings/net/qcom,ipa.yaml
index 8f86084bf12e..4e8dee4aa90d 100644
--- a/Documentation/devicetree/bindings/net/qcom,ipa.yaml
+++ b/Documentation/devicetree/bindings/net/qcom,ipa.yaml
@@ -100,7 +100,6 @@ properties:
- description: Whether the IPA clock is enabled (if valid)
qcom,smem-state-names:
- $ref: /schemas/types.yaml#/definitions/string-array
description: The names of the state bits used for SMP2P output
items:
- const: ipa-clock-enabled-valid
diff --git a/Documentation/devicetree/bindings/nvmem/nvmem-consumer.yaml b/Documentation/devicetree/bindings/nvmem/nvmem-consumer.yaml
index d5d7f113bade..828e4a1ece41 100644
--- a/Documentation/devicetree/bindings/nvmem/nvmem-consumer.yaml
+++ b/Documentation/devicetree/bindings/nvmem/nvmem-consumer.yaml
@@ -23,12 +23,10 @@ properties:
List of phandle to the nvmem data cells.
nvmem-names:
- $ref: /schemas/types.yaml#/definitions/string-array
description:
Names for the each nvmem provider.
nvmem-cell-names:
- $ref: /schemas/types.yaml#/definitions/string-array
description:
Names for each nvmem-cells specified.
diff --git a/Documentation/devicetree/bindings/remoteproc/ti,omap-remoteproc.yaml b/Documentation/devicetree/bindings/remoteproc/ti,omap-remoteproc.yaml
index 1a1159097a2a..73400bc6e91d 100644
--- a/Documentation/devicetree/bindings/remoteproc/ti,omap-remoteproc.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/ti,omap-remoteproc.yaml
@@ -93,7 +93,7 @@ properties:
# The following are the optional properties:
memory-region:
- $ref: /schemas/types.yaml#/definitions/phandle
+ maxItems: 1
description: |
phandle to the reserved memory node to be associated
with the remoteproc device. The reserved memory node
diff --git a/Documentation/devicetree/bindings/sound/ak4642.yaml b/Documentation/devicetree/bindings/sound/ak4642.yaml
index 6cd213be2266..1e2caa29790e 100644
--- a/Documentation/devicetree/bindings/sound/ak4642.yaml
+++ b/Documentation/devicetree/bindings/sound/ak4642.yaml
@@ -29,11 +29,9 @@ properties:
clock-frequency:
description: common clock binding; frequency of MCKO
- $ref: /schemas/types.yaml#/definitions/uint32
clock-output-names:
description: common clock name
- $ref: /schemas/types.yaml#/definitions/string
required:
- compatible
diff --git a/Documentation/devicetree/bindings/sound/google,cros-ec-codec.yaml b/Documentation/devicetree/bindings/sound/google,cros-ec-codec.yaml
index acfb9db021dc..77adbebed824 100644
--- a/Documentation/devicetree/bindings/sound/google,cros-ec-codec.yaml
+++ b/Documentation/devicetree/bindings/sound/google,cros-ec-codec.yaml
@@ -32,7 +32,7 @@ properties:
The last one integer is the length of the shared memory.
memory-region:
- $ref: '/schemas/types.yaml#/definitions/phandle'
+ maxItems: 1
description: |
Shared memory region to EC. A "shared-dma-pool".
See ../reserved-memory/reserved-memory.txt for details.
diff --git a/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml b/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml
index 2e1046513603..e494a0416748 100644
--- a/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml
+++ b/Documentation/devicetree/bindings/sound/renesas,rsnd.yaml
@@ -78,7 +78,6 @@ properties:
clock-frequency:
description: for audio_clkout0/1/2/3
- $ref: /schemas/types.yaml#/definitions/uint32-array
clkout-lr-asynchronous:
description: audio_clkoutn is asynchronizes with lr-clock.
diff --git a/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml b/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml
index 95a728f4d333..3ea8c0c1f45f 100644
--- a/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml
+++ b/Documentation/devicetree/bindings/thermal/qcom-spmi-adc-tm5.yaml
@@ -59,7 +59,6 @@ patternProperties:
properties:
reg:
- $ref: /schemas/types.yaml#/definitions/uint32
description: Specify the sensor channel. There are 8 channels in PMIC5's ADC TM
minimum: 0
maximum: 7
diff --git a/Documentation/devicetree/bindings/usb/usb.yaml b/Documentation/devicetree/bindings/usb/usb.yaml
index 78491e66ed24..939f217b8c7b 100644
--- a/Documentation/devicetree/bindings/usb/usb.yaml
+++ b/Documentation/devicetree/bindings/usb/usb.yaml
@@ -16,7 +16,6 @@ properties:
pattern: "^usb(@.*)?"
phys:
- $ref: /schemas/types.yaml#/definitions/phandle-array
description:
List of all the USB PHYs on this HCD
--
2.27.0
next reply other threads:[~2021-03-16 19:50 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-16 19:48 Rob Herring [this message]
2021-03-16 20:23 ` [PATCH] dt-bindings: Drop type references on common properties Dmitry Baryshkov
2021-03-16 20:26 ` Alex Elder
2021-03-16 20:50 ` Mark Brown
2021-03-16 21:58 ` Suman Anna
2021-03-17 5:52 ` Greg Kroah-Hartman
2021-03-17 8:30 ` Marc Kleine-Budde
2021-03-17 8:59 ` Srinivas Kandagatla
2021-03-17 9:44 ` Maxime Ripard
2021-03-17 22:41 ` Kuninori Morimoto
2021-03-18 9:16 ` Nicolas Saenz Julienne
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210316194858.3527845-1-robh@kernel.org \
--to=robh@kernel.org \
--cc=alsa-devel@alsa-project.org \
--cc=bgolaszewski@baylibre.com \
--cc=bjorn.andersson@linaro.org \
--cc=bleung@chromium.org \
--cc=broonie@kernel.org \
--cc=cychiang@chromium.org \
--cc=daniel.lezcano@linaro.org \
--cc=davem@davemloft.net \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.baryshkov@linaro.org \
--cc=elder@kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=krzk@kernel.org \
--cc=kuba@kernel.org \
--cc=kuninori.morimoto.gx@renesas.com \
--cc=linus.walleij@linaro.org \
--cc=linux-can@vger.kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux-remoteproc@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=mkl@pengutronix.de \
--cc=mripard@kernel.org \
--cc=netdev@vger.kernel.org \
--cc=nsaenzjulienne@suse.de \
--cc=ohad@wizery.com \
--cc=okukatla@codeaurora.org \
--cc=rui.zhang@intel.com \
--cc=s-anna@ti.com \
--cc=srinivas.kandagatla@linaro.org \
--cc=wahrenst@gmx.net \
--cc=yamada.masahiro@socionext.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).