* [PATCH v1 1/2] dt-bindings: thermal: qcom-tsens: Add compatible for sm8350 @ 2021-03-19 10:48 Robert Foss 2021-03-19 10:48 ` [PATCH v1 2/2] arm64: dts: qcom: sm8350: Add thermal zones and throttling support Robert Foss 0 siblings, 1 reply; 4+ messages in thread From: Robert Foss @ 2021-03-19 10:48 UTC (permalink / raw) To: amitk, agross, bjorn.andersson, rui.zhang, daniel.lezcano, robh+dt, linux-pm, linux-arm-msm, devicetree, linux-kernel, Vinod Koul Cc: Robert Foss Add tsens bindings for sm8350. Signed-off-by: Robert Foss <robert.foss@linaro.org> --- Documentation/devicetree/bindings/thermal/qcom-tsens.yaml | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml index 95462e071ab4..e788378eff8d 100644 --- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml +++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml @@ -43,6 +43,7 @@ properties: - qcom,sdm845-tsens - qcom,sm8150-tsens - qcom,sm8250-tsens + - qcom,sm8350-tsens - const: qcom,tsens-v2 reg: -- 2.27.0 ^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCH v1 2/2] arm64: dts: qcom: sm8350: Add thermal zones and throttling support 2021-03-19 10:48 [PATCH v1 1/2] dt-bindings: thermal: qcom-tsens: Add compatible for sm8350 Robert Foss @ 2021-03-19 10:48 ` Robert Foss 2021-03-19 11:24 ` Robert Foss 0 siblings, 1 reply; 4+ messages in thread From: Robert Foss @ 2021-03-19 10:48 UTC (permalink / raw) To: amitk, agross, bjorn.andersson, rui.zhang, daniel.lezcano, robh+dt, linux-pm, linux-arm-msm, devicetree, linux-kernel, Vinod Koul Cc: Robert Foss sm8350 has 29 thermal sensors split across two tsens controllers. Add the thermal zones to expose them and wireup the cpus to throttle their frequencies on crossing passive temperature thresholds. Signed-off-by: Robert Foss <robert.foss@linaro.org> --- arch/arm64/boot/dts/qcom/sm8350.dtsi | 829 +++++++++++++++++++++++++++ 1 file changed, 829 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi index 4abdba78cec1..424887652f47 100644 --- a/arch/arm64/boot/dts/qcom/sm8350.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi @@ -11,6 +11,7 @@ #include <dt-bindings/power/qcom-aoss-qmp.h> #include <dt-bindings/power/qcom-rpmpd.h> #include <dt-bindings/soc/qcom,rpmh-rsc.h> +#include <dt-bindings/thermal/thermal.h> / { interrupt-parent = <&intc>; @@ -46,6 +47,7 @@ CPU0: cpu@0 { enable-method = "psci"; next-level-cache = <&L2_0>; qcom,freq-domain = <&cpufreq_hw 0>; + #cooling-cells = <2>; L2_0: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; @@ -62,6 +64,7 @@ CPU1: cpu@100 { enable-method = "psci"; next-level-cache = <&L2_100>; qcom,freq-domain = <&cpufreq_hw 0>; + #cooling-cells = <2>; L2_100: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; @@ -75,6 +78,7 @@ CPU2: cpu@200 { enable-method = "psci"; next-level-cache = <&L2_200>; qcom,freq-domain = <&cpufreq_hw 0>; + #cooling-cells = <2>; L2_200: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; @@ -88,6 +92,7 @@ CPU3: cpu@300 { enable-method = "psci"; next-level-cache = <&L2_300>; qcom,freq-domain = <&cpufreq_hw 0>; + #cooling-cells = <2>; L2_300: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; @@ -101,6 +106,7 @@ CPU4: cpu@400 { enable-method = "psci"; next-level-cache = <&L2_400>; qcom,freq-domain = <&cpufreq_hw 1>; + #cooling-cells = <2>; L2_400: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; @@ -114,6 +120,7 @@ CPU5: cpu@500 { enable-method = "psci"; next-level-cache = <&L2_500>; qcom,freq-domain = <&cpufreq_hw 1>; + #cooling-cells = <2>; L2_500: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; @@ -128,6 +135,7 @@ CPU6: cpu@600 { enable-method = "psci"; next-level-cache = <&L2_600>; qcom,freq-domain = <&cpufreq_hw 1>; + #cooling-cells = <2>; L2_600: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; @@ -141,6 +149,7 @@ CPU7: cpu@700 { enable-method = "psci"; next-level-cache = <&L2_700>; qcom,freq-domain = <&cpufreq_hw 2>; + #cooling-cells = <2>; L2_700: l2-cache { compatible = "cache"; next-level-cache = <&L3_0>; @@ -682,6 +691,28 @@ pdc: interrupt-controller@b220000 { interrupt-controller; }; + tsens0: thermal-sensor@c222000 { + compatible = "qcom,sm8350-tsens", "qcom,tsens-v2"; + reg = <0 0x0C263000 0 0x1ff>, /* TM */ + <0 0x0C222000 0 0x8>; /* SROT */ + #qcom,sensors = <15>; + interrupts = <&pdc 26 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 28 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + }; + + tsens1: thermal-sensor@c223000 { + compatible = "qcom,sm8350-tsens", "qcom,tsens-v2"; + reg = <0 0x0C265000 0 0x1ff>, /* TM */ + <0 0x0c223000 0 0x8>; /* SROT */ + #qcom,sensors = <14>; + interrupts = <&pdc 27 IRQ_TYPE_LEVEL_HIGH>, + <&pdc 29 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "uplow", "critical"; + #thermal-sensor-cells = <1>; + }; + aoss_qmp: qmp@c300000 { compatible = "qcom,sm8350-aoss-qmp"; reg = <0 0x0c300000 0 0x100000>; @@ -1280,6 +1311,804 @@ IPCC_MPROC_SIGNAL_GLINK_QMP }; }; + thermal-zones { + cpu0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 1>; + + trips { + cpu0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu0_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu0_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu0_alert0>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu0_alert1>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 2>; + + trips { + cpu1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu1_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu1_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu1_alert0>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu1_alert1>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu2-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 3>; + + trips { + cpu2_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu2_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu2_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu2_alert0>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu2_alert1>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu3-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 4>; + + trips { + cpu3_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu3_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu3_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu3_alert0>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu3_alert1>; + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu4-top-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 7>; + + trips { + cpu4_top_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4_top_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4_top_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu4_top_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu4_top_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu5-top-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 8>; + + trips { + cpu5_top_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5_top_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5_top_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu5_top_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu5_top_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu6-top-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 9>; + + trips { + cpu6_top_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6_top_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6_top_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu6_top_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu6_top_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu7-top-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 10>; + + trips { + cpu7_top_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_top_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_top_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu7_top_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu7_top_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu4-bottom-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 11>; + + trips { + cpu4_bottom_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4_bottom_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu4_bottom_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu4_bottom_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu4_bottom_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu5-bottom-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 12>; + + trips { + cpu5_bottom_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5_bottom_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu5_bottom_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu5_bottom_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu5_bottom_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu6-bottom-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 13>; + + trips { + cpu6_bottom_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6_bottom_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu6_bottom_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu6_bottom_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu6_bottom_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + cpu7-bottom-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 14>; + + trips { + cpu7_bottom_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_bottom_alert1: trip-point1 { + temperature = <95000>; + hysteresis = <2000>; + type = "passive"; + }; + + cpu7_bottom_crit: cpu_crit { + temperature = <110000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + + cooling-maps { + map0 { + trip = <&cpu7_bottom_alert0>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu7_bottom_alert1>; + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + + aoss0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 0>; + + trips { + aoss0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + cluster0-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 5>; + + trips { + cluster0_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + cluster0_crit: cluster0_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + cluster1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens0 6>; + + trips { + cluster1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + cluster1_crit: cluster1_crit { + temperature = <110000>; + hysteresis = <2000>; + type = "critical"; + }; + }; + }; + + aoss1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 0>; + + trips { + aoss1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + gpu-thermal-top { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 1>; + + trips { + gpu1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <1000>; + type = "hot"; + }; + }; + }; + + gpu-thermal-bottom { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 2>; + + trips { + gpu2_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <1000>; + type = "hot"; + }; + }; + }; + + // TODO: What is the NSP subsystem? + nspss1-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 3>; + + trips { + nspss1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <1000>; + type = "hot"; + }; + }; + }; + + // TODO: What is the NSP subsystem? + nspss2-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 4>; + + trips { + nspss2_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <1000>; + type = "hot"; + }; + }; + }; + + // TODO: What is the NSP subsystem? + nspss3-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 5>; + + trips { + nspss3_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <1000>; + type = "hot"; + }; + }; + }; + + video-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 6>; + + trips { + video_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + mem-thermal { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 7>; + + trips { + mem_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + modem1-thermal-top { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 8>; + + trips { + modem1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + modem2-thermal-top { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 9>; + + trips { + modem2_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + modem3-thermal-top { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 10>; + + trips { + modem3_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + modem4-thermal-top { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 11>; + + trips { + modem4_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + camera-thermal-top { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 12>; + + trips { + camera1_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + + camera-thermal-bottom { + polling-delay-passive = <250>; + polling-delay = <1000>; + + thermal-sensors = <&tsens1 13>; + + trips { + camera2_alert0: trip-point0 { + temperature = <90000>; + hysteresis = <2000>; + type = "hot"; + }; + }; + }; + }; + timer { compatible = "arm,armv8-timer"; interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, -- 2.27.0 ^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH v1 2/2] arm64: dts: qcom: sm8350: Add thermal zones and throttling support 2021-03-19 10:48 ` [PATCH v1 2/2] arm64: dts: qcom: sm8350: Add thermal zones and throttling support Robert Foss @ 2021-03-19 11:24 ` Robert Foss 2021-03-19 11:27 ` Daniel Lezcano 0 siblings, 1 reply; 4+ messages in thread From: Robert Foss @ 2021-03-19 11:24 UTC (permalink / raw) To: amitk, Andy Gross, Bjorn Andersson, rui.zhang, Daniel Lezcano, Rob Herring, linux-pm, MSM, open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS, linux-kernel, Vinod Koul On Fri, 19 Mar 2021 at 11:49, Robert Foss <robert.foss@linaro.org> wrote: > > sm8350 has 29 thermal sensors split across two tsens controllers. Add > the thermal zones to expose them and wireup the cpus to throttle their > frequencies on crossing passive temperature thresholds. > > Signed-off-by: Robert Foss <robert.foss@linaro.org> > --- > arch/arm64/boot/dts/qcom/sm8350.dtsi | 829 +++++++++++++++++++++++++++ > 1 file changed, 829 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi > index 4abdba78cec1..424887652f47 100644 > --- a/arch/arm64/boot/dts/qcom/sm8350.dtsi > +++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi > @@ -11,6 +11,7 @@ > #include <dt-bindings/power/qcom-aoss-qmp.h> > #include <dt-bindings/power/qcom-rpmpd.h> > #include <dt-bindings/soc/qcom,rpmh-rsc.h> > +#include <dt-bindings/thermal/thermal.h> > > / { > interrupt-parent = <&intc>; > @@ -46,6 +47,7 @@ CPU0: cpu@0 { > enable-method = "psci"; > next-level-cache = <&L2_0>; > qcom,freq-domain = <&cpufreq_hw 0>; > + #cooling-cells = <2>; > L2_0: l2-cache { > compatible = "cache"; > next-level-cache = <&L3_0>; > @@ -62,6 +64,7 @@ CPU1: cpu@100 { > enable-method = "psci"; > next-level-cache = <&L2_100>; > qcom,freq-domain = <&cpufreq_hw 0>; > + #cooling-cells = <2>; > L2_100: l2-cache { > compatible = "cache"; > next-level-cache = <&L3_0>; > @@ -75,6 +78,7 @@ CPU2: cpu@200 { > enable-method = "psci"; > next-level-cache = <&L2_200>; > qcom,freq-domain = <&cpufreq_hw 0>; > + #cooling-cells = <2>; > L2_200: l2-cache { > compatible = "cache"; > next-level-cache = <&L3_0>; > @@ -88,6 +92,7 @@ CPU3: cpu@300 { > enable-method = "psci"; > next-level-cache = <&L2_300>; > qcom,freq-domain = <&cpufreq_hw 0>; > + #cooling-cells = <2>; > L2_300: l2-cache { > compatible = "cache"; > next-level-cache = <&L3_0>; > @@ -101,6 +106,7 @@ CPU4: cpu@400 { > enable-method = "psci"; > next-level-cache = <&L2_400>; > qcom,freq-domain = <&cpufreq_hw 1>; > + #cooling-cells = <2>; > L2_400: l2-cache { > compatible = "cache"; > next-level-cache = <&L3_0>; > @@ -114,6 +120,7 @@ CPU5: cpu@500 { > enable-method = "psci"; > next-level-cache = <&L2_500>; > qcom,freq-domain = <&cpufreq_hw 1>; > + #cooling-cells = <2>; > L2_500: l2-cache { > compatible = "cache"; > next-level-cache = <&L3_0>; > @@ -128,6 +135,7 @@ CPU6: cpu@600 { > enable-method = "psci"; > next-level-cache = <&L2_600>; > qcom,freq-domain = <&cpufreq_hw 1>; > + #cooling-cells = <2>; > L2_600: l2-cache { > compatible = "cache"; > next-level-cache = <&L3_0>; > @@ -141,6 +149,7 @@ CPU7: cpu@700 { > enable-method = "psci"; > next-level-cache = <&L2_700>; > qcom,freq-domain = <&cpufreq_hw 2>; > + #cooling-cells = <2>; > L2_700: l2-cache { > compatible = "cache"; > next-level-cache = <&L3_0>; > @@ -682,6 +691,28 @@ pdc: interrupt-controller@b220000 { > interrupt-controller; > }; > > + tsens0: thermal-sensor@c222000 { > + compatible = "qcom,sm8350-tsens", "qcom,tsens-v2"; > + reg = <0 0x0C263000 0 0x1ff>, /* TM */ > + <0 0x0C222000 0 0x8>; /* SROT */ > + #qcom,sensors = <15>; > + interrupts = <&pdc 26 IRQ_TYPE_LEVEL_HIGH>, > + <&pdc 28 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-names = "uplow", "critical"; > + #thermal-sensor-cells = <1>; > + }; > + > + tsens1: thermal-sensor@c223000 { > + compatible = "qcom,sm8350-tsens", "qcom,tsens-v2"; > + reg = <0 0x0C265000 0 0x1ff>, /* TM */ > + <0 0x0c223000 0 0x8>; /* SROT */ > + #qcom,sensors = <14>; > + interrupts = <&pdc 27 IRQ_TYPE_LEVEL_HIGH>, > + <&pdc 29 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-names = "uplow", "critical"; > + #thermal-sensor-cells = <1>; > + }; > + > aoss_qmp: qmp@c300000 { > compatible = "qcom,sm8350-aoss-qmp"; > reg = <0 0x0c300000 0 0x100000>; > @@ -1280,6 +1311,804 @@ IPCC_MPROC_SIGNAL_GLINK_QMP > }; > }; > > + thermal-zones { > + cpu0-thermal { > + polling-delay-passive = <250>; > + polling-delay = <1000>; > + > + thermal-sensors = <&tsens0 1>; > + > + trips { > + cpu0_alert0: trip-point0 { > + temperature = <90000>; > + hysteresis = <2000>; > + type = "passive"; > + }; > + > + cpu0_alert1: trip-point1 { > + temperature = <95000>; > + hysteresis = <2000>; > + type = "passive"; > + }; > + > + cpu0_crit: cpu_crit { > + temperature = <110000>; > + hysteresis = <1000>; > + type = "critical"; > + }; > + }; > + > + cooling-maps { > + map0 { > + trip = <&cpu0_alert0>; > + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > + }; > + map1 { > + trip = <&cpu0_alert1>; > + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > + }; > + }; > + }; > + > + cpu1-thermal { > + polling-delay-passive = <250>; > + polling-delay = <1000>; > + > + thermal-sensors = <&tsens0 2>; > + > + trips { > + cpu1_alert0: trip-point0 { > + temperature = <90000>; > + hysteresis = <2000>; > + type = "passive"; > + }; > + > + cpu1_alert1: trip-point1 { > + temperature = <95000>; > + hysteresis = <2000>; > + type = "passive"; > + }; > + > + cpu1_crit: cpu_crit { > + temperature = <110000>; > + hysteresis = <1000>; > + type = "critical"; > + }; > + }; > + > + cooling-maps { > + map0 { > + trip = <&cpu1_alert0>; > + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > + }; > + map1 { > + trip = <&cpu1_alert1>; > + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > + }; > + }; > + }; > + > + cpu2-thermal { > + polling-delay-passive = <250>; > + polling-delay = <1000>; > + > + thermal-sensors = <&tsens0 3>; > + > + trips { > + cpu2_alert0: trip-point0 { > + temperature = <90000>; > + hysteresis = <2000>; > + type = "passive"; > + }; > + > + cpu2_alert1: trip-point1 { > + temperature = <95000>; > + hysteresis = <2000>; > + type = "passive"; > + }; > + > + cpu2_crit: cpu_crit { > + temperature = <110000>; > + hysteresis = <1000>; > + type = "critical"; > + }; > + }; > + > + cooling-maps { > + map0 { > + trip = <&cpu2_alert0>; > + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > + }; > + map1 { > + trip = <&cpu2_alert1>; > + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > + }; > + }; > + }; > + > + cpu3-thermal { > + polling-delay-passive = <250>; > + polling-delay = <1000>; > + > + thermal-sensors = <&tsens0 4>; > + > + trips { > + cpu3_alert0: trip-point0 { > + temperature = <90000>; > + hysteresis = <2000>; > + type = "passive"; > + }; > + > + cpu3_alert1: trip-point1 { > + temperature = <95000>; > + hysteresis = <2000>; > + type = "passive"; > + }; > + > + cpu3_crit: cpu_crit { > + temperature = <110000>; > + hysteresis = <1000>; > + type = "critical"; > + }; > + }; > + > + cooling-maps { > + map0 { > + trip = <&cpu3_alert0>; > + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > + }; > + map1 { > + trip = <&cpu3_alert1>; > + cooling-device = <&CPU0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > + }; > + }; > + }; > + > + cpu4-top-thermal { > + polling-delay-passive = <250>; > + polling-delay = <1000>; > + > + thermal-sensors = <&tsens0 7>; > + > + trips { > + cpu4_top_alert0: trip-point0 { > + temperature = <90000>; > + hysteresis = <2000>; > + type = "passive"; > + }; > + > + cpu4_top_alert1: trip-point1 { > + temperature = <95000>; > + hysteresis = <2000>; > + type = "passive"; > + }; > + > + cpu4_top_crit: cpu_crit { > + temperature = <110000>; > + hysteresis = <1000>; > + type = "critical"; > + }; > + }; > + > + cooling-maps { > + map0 { > + trip = <&cpu4_top_alert0>; > + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > + }; > + map1 { > + trip = <&cpu4_top_alert1>; > + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > + }; > + }; > + }; > + > + cpu5-top-thermal { > + polling-delay-passive = <250>; > + polling-delay = <1000>; > + > + thermal-sensors = <&tsens0 8>; > + > + trips { > + cpu5_top_alert0: trip-point0 { > + temperature = <90000>; > + hysteresis = <2000>; > + type = "passive"; > + }; > + > + cpu5_top_alert1: trip-point1 { > + temperature = <95000>; > + hysteresis = <2000>; > + type = "passive"; > + }; > + > + cpu5_top_crit: cpu_crit { > + temperature = <110000>; > + hysteresis = <1000>; > + type = "critical"; > + }; > + }; > + > + cooling-maps { > + map0 { > + trip = <&cpu5_top_alert0>; > + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > + }; > + map1 { > + trip = <&cpu5_top_alert1>; > + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > + }; > + }; > + }; > + > + cpu6-top-thermal { > + polling-delay-passive = <250>; > + polling-delay = <1000>; > + > + thermal-sensors = <&tsens0 9>; > + > + trips { > + cpu6_top_alert0: trip-point0 { > + temperature = <90000>; > + hysteresis = <2000>; > + type = "passive"; > + }; > + > + cpu6_top_alert1: trip-point1 { > + temperature = <95000>; > + hysteresis = <2000>; > + type = "passive"; > + }; > + > + cpu6_top_crit: cpu_crit { > + temperature = <110000>; > + hysteresis = <1000>; > + type = "critical"; > + }; > + }; > + > + cooling-maps { > + map0 { > + trip = <&cpu6_top_alert0>; > + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > + }; > + map1 { > + trip = <&cpu6_top_alert1>; > + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > + }; > + }; > + }; > + > + cpu7-top-thermal { > + polling-delay-passive = <250>; > + polling-delay = <1000>; > + > + thermal-sensors = <&tsens0 10>; > + > + trips { > + cpu7_top_alert0: trip-point0 { > + temperature = <90000>; > + hysteresis = <2000>; > + type = "passive"; > + }; > + > + cpu7_top_alert1: trip-point1 { > + temperature = <95000>; > + hysteresis = <2000>; > + type = "passive"; > + }; > + > + cpu7_top_crit: cpu_crit { > + temperature = <110000>; > + hysteresis = <1000>; > + type = "critical"; > + }; > + }; > + > + cooling-maps { > + map0 { > + trip = <&cpu7_top_alert0>; > + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > + }; > + map1 { > + trip = <&cpu7_top_alert1>; > + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > + }; > + }; > + }; > + > + cpu4-bottom-thermal { > + polling-delay-passive = <250>; > + polling-delay = <1000>; > + > + thermal-sensors = <&tsens0 11>; > + > + trips { > + cpu4_bottom_alert0: trip-point0 { > + temperature = <90000>; > + hysteresis = <2000>; > + type = "passive"; > + }; > + > + cpu4_bottom_alert1: trip-point1 { > + temperature = <95000>; > + hysteresis = <2000>; > + type = "passive"; > + }; > + > + cpu4_bottom_crit: cpu_crit { > + temperature = <110000>; > + hysteresis = <1000>; > + type = "critical"; > + }; > + }; > + > + cooling-maps { > + map0 { > + trip = <&cpu4_bottom_alert0>; > + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > + }; > + map1 { > + trip = <&cpu4_bottom_alert1>; > + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > + }; > + }; > + }; > + > + cpu5-bottom-thermal { > + polling-delay-passive = <250>; > + polling-delay = <1000>; > + > + thermal-sensors = <&tsens0 12>; > + > + trips { > + cpu5_bottom_alert0: trip-point0 { > + temperature = <90000>; > + hysteresis = <2000>; > + type = "passive"; > + }; > + > + cpu5_bottom_alert1: trip-point1 { > + temperature = <95000>; > + hysteresis = <2000>; > + type = "passive"; > + }; > + > + cpu5_bottom_crit: cpu_crit { > + temperature = <110000>; > + hysteresis = <1000>; > + type = "critical"; > + }; > + }; > + > + cooling-maps { > + map0 { > + trip = <&cpu5_bottom_alert0>; > + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > + }; > + map1 { > + trip = <&cpu5_bottom_alert1>; > + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > + }; > + }; > + }; > + > + cpu6-bottom-thermal { > + polling-delay-passive = <250>; > + polling-delay = <1000>; > + > + thermal-sensors = <&tsens0 13>; > + > + trips { > + cpu6_bottom_alert0: trip-point0 { > + temperature = <90000>; > + hysteresis = <2000>; > + type = "passive"; > + }; > + > + cpu6_bottom_alert1: trip-point1 { > + temperature = <95000>; > + hysteresis = <2000>; > + type = "passive"; > + }; > + > + cpu6_bottom_crit: cpu_crit { > + temperature = <110000>; > + hysteresis = <1000>; > + type = "critical"; > + }; > + }; > + > + cooling-maps { > + map0 { > + trip = <&cpu6_bottom_alert0>; > + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > + }; > + map1 { > + trip = <&cpu6_bottom_alert1>; > + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > + }; > + }; > + }; > + > + cpu7-bottom-thermal { > + polling-delay-passive = <250>; > + polling-delay = <1000>; > + > + thermal-sensors = <&tsens0 14>; > + > + trips { > + cpu7_bottom_alert0: trip-point0 { > + temperature = <90000>; > + hysteresis = <2000>; > + type = "passive"; > + }; > + > + cpu7_bottom_alert1: trip-point1 { > + temperature = <95000>; > + hysteresis = <2000>; > + type = "passive"; > + }; > + > + cpu7_bottom_crit: cpu_crit { > + temperature = <110000>; > + hysteresis = <1000>; > + type = "critical"; > + }; > + }; > + > + cooling-maps { > + map0 { > + trip = <&cpu7_bottom_alert0>; > + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > + }; > + map1 { > + trip = <&cpu7_bottom_alert1>; > + cooling-device = <&CPU4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU6 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, > + <&CPU7 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; > + }; > + }; > + }; > + > + aoss0-thermal { > + polling-delay-passive = <250>; > + polling-delay = <1000>; > + > + thermal-sensors = <&tsens0 0>; > + > + trips { > + aoss0_alert0: trip-point0 { > + temperature = <90000>; > + hysteresis = <2000>; > + type = "hot"; > + }; > + }; > + }; > + > + cluster0-thermal { > + polling-delay-passive = <250>; > + polling-delay = <1000>; > + > + thermal-sensors = <&tsens0 5>; > + > + trips { > + cluster0_alert0: trip-point0 { > + temperature = <90000>; > + hysteresis = <2000>; > + type = "hot"; > + }; > + cluster0_crit: cluster0_crit { > + temperature = <110000>; > + hysteresis = <2000>; > + type = "critical"; > + }; > + }; > + }; > + > + cluster1-thermal { > + polling-delay-passive = <250>; > + polling-delay = <1000>; > + > + thermal-sensors = <&tsens0 6>; > + > + trips { > + cluster1_alert0: trip-point0 { > + temperature = <90000>; > + hysteresis = <2000>; > + type = "hot"; > + }; > + cluster1_crit: cluster1_crit { > + temperature = <110000>; > + hysteresis = <2000>; > + type = "critical"; > + }; > + }; > + }; > + > + aoss1-thermal { > + polling-delay-passive = <250>; > + polling-delay = <1000>; > + > + thermal-sensors = <&tsens1 0>; > + > + trips { > + aoss1_alert0: trip-point0 { > + temperature = <90000>; > + hysteresis = <2000>; > + type = "hot"; > + }; > + }; > + }; > + > + gpu-thermal-top { > + polling-delay-passive = <250>; > + polling-delay = <1000>; > + > + thermal-sensors = <&tsens1 1>; > + > + trips { > + gpu1_alert0: trip-point0 { > + temperature = <90000>; > + hysteresis = <1000>; > + type = "hot"; > + }; > + }; > + }; > + > + gpu-thermal-bottom { > + polling-delay-passive = <250>; > + polling-delay = <1000>; > + > + thermal-sensors = <&tsens1 2>; > + > + trips { > + gpu2_alert0: trip-point0 { > + temperature = <90000>; > + hysteresis = <1000>; > + type = "hot"; > + }; > + }; > + }; > + > + // TODO: What is the NSP subsystem? This comment should not have been included, will remove in v2 > + nspss1-thermal { > + polling-delay-passive = <250>; > + polling-delay = <1000>; > + > + thermal-sensors = <&tsens1 3>; > + > + trips { > + nspss1_alert0: trip-point0 { > + temperature = <90000>; > + hysteresis = <1000>; > + type = "hot"; > + }; > + }; > + }; > + > + // TODO: What is the NSP subsystem? This comment should not have been included, will remove in v2 > + nspss2-thermal { > + polling-delay-passive = <250>; > + polling-delay = <1000>; > + > + thermal-sensors = <&tsens1 4>; > + > + trips { > + nspss2_alert0: trip-point0 { > + temperature = <90000>; > + hysteresis = <1000>; > + type = "hot"; > + }; > + }; > + }; > + > + // TODO: What is the NSP subsystem? This comment should not have been included, will remove in v2 > + nspss3-thermal { > + polling-delay-passive = <250>; > + polling-delay = <1000>; > + > + thermal-sensors = <&tsens1 5>; > + > + trips { > + nspss3_alert0: trip-point0 { > + temperature = <90000>; > + hysteresis = <1000>; > + type = "hot"; > + }; > + }; > + }; > + > + video-thermal { > + polling-delay-passive = <250>; > + polling-delay = <1000>; > + > + thermal-sensors = <&tsens1 6>; > + > + trips { > + video_alert0: trip-point0 { > + temperature = <90000>; > + hysteresis = <2000>; > + type = "hot"; > + }; > + }; > + }; > + > + mem-thermal { > + polling-delay-passive = <250>; > + polling-delay = <1000>; > + > + thermal-sensors = <&tsens1 7>; > + > + trips { > + mem_alert0: trip-point0 { > + temperature = <90000>; > + hysteresis = <2000>; > + type = "hot"; > + }; > + }; > + }; > + > + modem1-thermal-top { > + polling-delay-passive = <250>; > + polling-delay = <1000>; > + > + thermal-sensors = <&tsens1 8>; > + > + trips { > + modem1_alert0: trip-point0 { > + temperature = <90000>; > + hysteresis = <2000>; > + type = "hot"; > + }; > + }; > + }; > + > + modem2-thermal-top { > + polling-delay-passive = <250>; > + polling-delay = <1000>; > + > + thermal-sensors = <&tsens1 9>; > + > + trips { > + modem2_alert0: trip-point0 { > + temperature = <90000>; > + hysteresis = <2000>; > + type = "hot"; > + }; > + }; > + }; > + > + modem3-thermal-top { > + polling-delay-passive = <250>; > + polling-delay = <1000>; > + > + thermal-sensors = <&tsens1 10>; > + > + trips { > + modem3_alert0: trip-point0 { > + temperature = <90000>; > + hysteresis = <2000>; > + type = "hot"; > + }; > + }; > + }; > + > + modem4-thermal-top { > + polling-delay-passive = <250>; > + polling-delay = <1000>; > + > + thermal-sensors = <&tsens1 11>; > + > + trips { > + modem4_alert0: trip-point0 { > + temperature = <90000>; > + hysteresis = <2000>; > + type = "hot"; > + }; > + }; > + }; > + > + camera-thermal-top { > + polling-delay-passive = <250>; > + polling-delay = <1000>; > + > + thermal-sensors = <&tsens1 12>; > + > + trips { > + camera1_alert0: trip-point0 { > + temperature = <90000>; > + hysteresis = <2000>; > + type = "hot"; > + }; > + }; > + }; > + > + camera-thermal-bottom { > + polling-delay-passive = <250>; > + polling-delay = <1000>; > + > + thermal-sensors = <&tsens1 13>; > + > + trips { > + camera2_alert0: trip-point0 { > + temperature = <90000>; > + hysteresis = <2000>; > + type = "hot"; > + }; > + }; > + }; > + }; > + > timer { > compatible = "arm,armv8-timer"; > interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, > -- > 2.27.0 > ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH v1 2/2] arm64: dts: qcom: sm8350: Add thermal zones and throttling support 2021-03-19 11:24 ` Robert Foss @ 2021-03-19 11:27 ` Daniel Lezcano 0 siblings, 0 replies; 4+ messages in thread From: Daniel Lezcano @ 2021-03-19 11:27 UTC (permalink / raw) To: Robert Foss, amitk, Andy Gross, Bjorn Andersson, rui.zhang, Rob Herring, linux-pm, MSM, open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS, linux-kernel, Vinod Koul On 19/03/2021 12:24, Robert Foss wrote: > On Fri, 19 Mar 2021 at 11:49, Robert Foss <robert.foss@linaro.org> wrote: >> >> sm8350 has 29 thermal sensors split across two tsens controllers. Add >> the thermal zones to expose them and wireup the cpus to throttle their >> frequencies on crossing passive temperature thresholds. >> >> Signed-off-by: Robert Foss <robert.foss@linaro.org> >> --- [ ... ] >> + }; >> + >> + // TODO: What is the NSP subsystem? > > This comment should not have been included, will remove in v2 Please trim when replying to a large patch file. [ ... ] >> + trips { >> + nspss1_alert0: trip-point0 { >> + temperature = <90000>; >> + hysteresis = <1000>; >> + type = "hot"; >> + }; >> + }; >> + }; >> + >> + // TODO: What is the NSP subsystem? > > This comment should not have been included, will remove in v2 [ ... ] >> + trips { >> + nspss2_alert0: trip-point0 { >> + temperature = <90000>; >> + hysteresis = <1000>; >> + type = "hot"; >> + }; >> + }; >> + }; >> + >> + // TODO: What is the NSP subsystem? > > This comment should not have been included, will remove in v2 > [ ... ] -- <http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook | <http://twitter.com/#!/linaroorg> Twitter | <http://www.linaro.org/linaro-blog/> Blog ^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2021-03-19 11:28 UTC | newest] Thread overview: 4+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2021-03-19 10:48 [PATCH v1 1/2] dt-bindings: thermal: qcom-tsens: Add compatible for sm8350 Robert Foss 2021-03-19 10:48 ` [PATCH v1 2/2] arm64: dts: qcom: sm8350: Add thermal zones and throttling support Robert Foss 2021-03-19 11:24 ` Robert Foss 2021-03-19 11:27 ` Daniel Lezcano
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).