devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Eddie James <eajames@linux.ibm.com>
To: joel@jms.id.au
Cc: andrew@aj.id.au, robh+dt@kernel.org, devicetree@vger.kernel.org,
	linux-aspeed@lists.ozlabs.org,
	Eddie James <eajames@linux.ibm.com>
Subject: [PATCH 00/22] ARM: dts: aspeed: Updates for Rainier and Everest machines
Date: Mon, 29 Mar 2021 09:59:58 -0500	[thread overview]
Message-ID: <20210329150020.13632-1-eajames@linux.ibm.com> (raw)

This series updates the device trees for the Rainier and Everest system
BMCs. For Rainier, the changes have been tested fairly extensively in
hardware. Everest has largely been tested in simulation and some basic
hardware verification testing.

Alpana Kumari (3):
  ARM: dts: aspeed: rainier: Add presence GPIOs
  ARM: dts: aspeed: everest: GPIOs support
  ARM: dts: aspeed: rainier: Support pass 2 planar

Brandon Wyman (2):
  ARM: dts: aspeed: rainier: Add gpio-keys-polled for fans
  ARM: dts: aspeed: everest: Add power supply i2c devices

Eddie James (7):
  ARM: dts: aspeed: rainier: Add additional processor CFAMs
  ARM: dts: aspeed: rainier: Enable fan watchdog
  ARM: dts: aspeed: rainier 4U: Fix fan configuration
  ARM: dts: Aspeed: Everest: Add FSI CFAMs and re-number engines
  ARM: dts: Aspeed: Everest: Add RTC
  ARM: dts: aspeed: everest: Enable fan watchdog
  ARM: dts: aspeed: Add Rainier 1S4U machine

Jim Wright (1):
  ARM: dts: aspeed: everest: Add UCD90320 power sequencer

Matthew Barth (2):
  ARM: dts: Aspeed: Everest: Add max31785 fan controller device
  ARM: dts: Aspeed: Everest: Add pca9552 fan presence

PriyangaRamasamy (1):
  ARM: dts: aspeed: Everest: Add I2C components

Vishwanatha Subbanna (6):
  ARM: dts: aspeed: rainier: Add Operator Panel LEDs
  ARM: dts: aspeed: rainier: Add directly controlled LEDs
  ARM: dts: aspeed: rainier: Add leds that are off PCA9552
  ARM: dts: aspeed: rainier: Add leds that are off pic16f882
  ARM: dts: aspeed: rainier: Add leds on optional DASD cards
  ARM: dts: aspeed: rainier: Add leds on optional PCI cable cards

 arch/arm/boot/dts/Makefile                    |    3 +
 arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts  | 1770 +++++++++++-
 .../boot/dts/aspeed-bmc-ibm-rainier-1s4u.dts  |   14 +
 .../boot/dts/aspeed-bmc-ibm-rainier-4u-v2.dts |  198 ++
 .../boot/dts/aspeed-bmc-ibm-rainier-4u.dts    |   14 +
 .../boot/dts/aspeed-bmc-ibm-rainier-v2.dts    |  198 ++
 arch/arm/boot/dts/aspeed-bmc-ibm-rainier.dts  | 2367 +++++++++++++++--
 7 files changed, 4290 insertions(+), 274 deletions(-)
 create mode 100644 arch/arm/boot/dts/aspeed-bmc-ibm-rainier-1s4u.dts
 create mode 100644 arch/arm/boot/dts/aspeed-bmc-ibm-rainier-4u-v2.dts
 create mode 100644 arch/arm/boot/dts/aspeed-bmc-ibm-rainier-v2.dts

-- 
2.27.0


             reply	other threads:[~2021-03-29 15:01 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-03-29 14:59 Eddie James [this message]
2021-03-29 14:59 ` [PATCH 01/22] ARM: dts: aspeed: rainier: Add Operator Panel LEDs Eddie James
2021-03-29 15:00 ` [PATCH 02/22] ARM: dts: aspeed: rainier: Add directly controlled LEDs Eddie James
2021-03-29 15:00 ` [PATCH 03/22] ARM: dts: aspeed: rainier: Add gpio-keys-polled for fans Eddie James
2021-03-29 15:00 ` [PATCH 04/22] ARM: dts: aspeed: rainier: Add additional processor CFAMs Eddie James
2021-03-29 15:00 ` [PATCH 05/22] ARM: dts: aspeed: rainier: Add leds that are off PCA9552 Eddie James
2021-03-29 15:00 ` [PATCH 06/22] ARM: dts: aspeed: rainier: Add leds that are off pic16f882 Eddie James
2021-03-29 15:00 ` [PATCH 07/22] ARM: dts: aspeed: rainier: Add leds on optional DASD cards Eddie James
2021-03-29 15:00 ` [PATCH 08/22] ARM: dts: aspeed: rainier: Add leds on optional PCI cable cards Eddie James
2021-03-29 15:00 ` [PATCH 09/22] ARM: dts: aspeed: rainier: Add presence GPIOs Eddie James
2021-03-29 15:00 ` [PATCH 10/22] ARM: dts: aspeed: rainier: Enable fan watchdog Eddie James
2021-03-29 15:00 ` [PATCH 11/22] ARM: dts: aspeed: rainier 4U: Fix fan configuration Eddie James
2021-03-30  0:23   ` kernel test robot
2021-03-29 15:00 ` [PATCH 12/22] ARM: dts: aspeed: Everest: Add I2C components Eddie James
2021-03-29 15:00 ` [PATCH 13/22] ARM: dts: Aspeed: Everest: Add max31785 fan controller device Eddie James
2021-03-29 15:00 ` [PATCH 14/22] ARM: dts: Aspeed: Everest: Add FSI CFAMs and re-number engines Eddie James
2021-03-29 15:00 ` [PATCH 15/22] ARM: dts: Aspeed: Everest: Add pca9552 fan presence Eddie James
2021-04-07 22:34   ` Brandon Wyman
2021-03-29 15:00 ` [PATCH 16/22] ARM: dts: aspeed: everest: Add power supply i2c devices Eddie James
2021-03-29 15:00 ` [PATCH 17/22] ARM: dts: aspeed: everest: Add UCD90320 power sequencer Eddie James
2021-03-29 15:00 ` [PATCH 18/22] ARM: dts: aspeed: everest: GPIOs support Eddie James
2021-04-07 22:19   ` Brandon Wyman
2021-03-29 15:00 ` [PATCH 19/22] ARM: dts: Aspeed: Everest: Add RTC Eddie James
2021-03-29 15:00 ` [PATCH 20/22] ARM: dts: aspeed: everest: Enable fan watchdog Eddie James
2021-04-08  0:34   ` Andrew Jeffery
2021-03-29 15:00 ` [PATCH 21/22] ARM: dts: aspeed: rainier: Support pass 2 planar Eddie James
2021-03-30  3:57   ` kernel test robot
2021-03-29 15:00 ` [PATCH 22/22] ARM: dts: aspeed: Add Rainier 1S4U machine Eddie James

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210329150020.13632-1-eajames@linux.ibm.com \
    --to=eajames@linux.ibm.com \
    --cc=andrew@aj.id.au \
    --cc=devicetree@vger.kernel.org \
    --cc=joel@jms.id.au \
    --cc=linux-aspeed@lists.ozlabs.org \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).