From: Eddie James <eajames@linux.ibm.com>
To: joel@jms.id.au
Cc: andrew@aj.id.au, robh+dt@kernel.org, devicetree@vger.kernel.org,
linux-aspeed@lists.ozlabs.org,
PriyangaRamasamy <priyanga24@in.ibm.com>,
Eddie James <eajames@linux.ibm.com>
Subject: [PATCH 12/22] ARM: dts: aspeed: Everest: Add I2C components
Date: Mon, 29 Mar 2021 10:00:10 -0500 [thread overview]
Message-ID: <20210329150020.13632-13-eajames@linux.ibm.com> (raw)
In-Reply-To: <20210329150020.13632-1-eajames@linux.ibm.com>
From: PriyangaRamasamy <priyanga24@in.ibm.com>
Tested and able to bound the devices with i2c driver.
Signed-off-by: PriyangaRamasamy <priyanga24@in.ibm.com>
Signed-off-by: Eddie James <eajames@linux.ibm.com>
---
arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts | 408 +++++++++++++++++++
1 file changed, 408 insertions(+)
diff --git a/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts b/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts
index 6bd876657bb8..ab7be4d511a5 100644
--- a/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-ibm-everest.dts
@@ -45,6 +45,25 @@ aliases {
i2c416 = &cfam3_i2c16;
i2c417 = &cfam3_i2c17;
+ i2c16 = &i2c4mux0chn0;
+ i2c17 = &i2c4mux0chn1;
+ i2c18 = &i2c4mux0chn2;
+ i2c19 = &i2c5mux0chn0;
+ i2c20 = &i2c5mux0chn1;
+ i2c21 = &i2c5mux0chn2;
+ i2c22 = &i2c5mux0chn3;
+ i2c23 = &i2c6mux0chn0;
+ i2c24 = &i2c6mux0chn1;
+ i2c25 = &i2c6mux0chn2;
+ i2c26 = &i2c6mux0chn3;
+ i2c27 = &i2c14mux0chn0;
+ i2c28 = &i2c14mux0chn1;
+ i2c29 = &i2c14mux0chn2;
+ i2c30 = &i2c14mux1chn0;
+ i2c31 = &i2c14mux1chn1;
+ i2c32 = &i2c14mux1chn2;
+ i2c33 = &i2c14mux1chn3;
+
serial4 = &uart5;
spi10 = &cfam0_spi0;
@@ -105,6 +124,395 @@ vga_memory: region@bf000000 {
};
};
+&i2c0 {
+ status = "okay";
+
+ eeprom@51 {
+ compatible = "atmel,24c64";
+ reg = <0x51>;
+ };
+};
+
+&i2c1 {
+ status = "okay";
+};
+
+&i2c2 {
+ status = "okay";
+};
+
+&i2c3 {
+ status = "okay";
+
+ eeprom@54 {
+ compatible = "atmel,24c128";
+ reg = <0x54>;
+ };
+};
+
+&i2c4 {
+ status = "okay";
+
+ i2c-switch@70 {
+ compatible = "nxp,pca9546";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+ i2c-mux-idle-disconnect;
+
+ i2c4mux0chn0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ eeprom@52 {
+ compatible = "atmel,24c64";
+ reg = <0x52>;
+ };
+ };
+
+ i2c4mux0chn1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+ };
+
+ i2c4mux0chn2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ eeprom@51 {
+ compatible = "atmel,24c64";
+ reg = <0x51>;
+ };
+ };
+ };
+};
+
+&i2c5 {
+ status = "okay";
+
+ i2c-switch@70 {
+ compatible = "nxp,pca9546";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+ i2c-mux-idle-disconnect;
+
+ i2c5mux0chn0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+ };
+
+ i2c5mux0chn1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ eeprom@51 {
+ compatible = "atmel,24c64";
+ reg = <0x51>;
+ };
+ };
+
+ i2c5mux0chn2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ eeprom@52 {
+ compatible = "atmel,24c64";
+ reg = <0x52>;
+ };
+ };
+
+ i2c5mux0chn3: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ eeprom@53 {
+ compatible = "atmel,24c64";
+ reg = <0x53>;
+ };
+ };
+ };
+};
+
+&i2c6 {
+ status = "okay";
+
+ i2c-switch@70 {
+ compatible = "nxp,pca9546";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+ i2c-mux-idle-disconnect;
+
+ i2c6mux0chn0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+ };
+
+ i2c6mux0chn1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ eeprom@52 {
+ compatible = "atmel,24c64";
+ reg = <0x52>;
+ };
+ };
+
+ i2c6mux0chn2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ eeprom@53 {
+ compatible = "atmel,24c64";
+ reg = <0x53>;
+ };
+ };
+
+ i2c6mux0chn3: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ eeprom@51 {
+ compatible = "atmel,24c64";
+ reg = <0x51>;
+ };
+ };
+ };
+};
+
+&i2c7 {
+ status = "okay";
+};
+
+&i2c8 {
+ status = "okay";
+
+ eeprom@51 {
+ compatible = "atmel,24c64";
+ reg = <0x51>;
+ };
+
+ eeprom@50 {
+ compatible = "atmel,24c128";
+ reg = <0x50>;
+ };
+};
+
+&i2c9 {
+ status = "okay";
+
+ eeprom@50 {
+ compatible = "atmel,24c128";
+ reg = <0x50>;
+ };
+
+ eeprom@51 {
+ compatible = "atmel,24c128";
+ reg = <0x51>;
+ };
+
+ eeprom@53 {
+ compatible = "atmel,24c128";
+ reg = <0x53>;
+ };
+
+ eeprom@52 {
+ compatible = "atmel,24c128";
+ reg = <0x52>;
+ };
+};
+
+&i2c10 {
+ status = "okay";
+
+ eeprom@51 {
+ compatible = "atmel,24c128";
+ reg = <0x51>;
+ };
+
+ eeprom@50 {
+ compatible = "atmel,24c128";
+ reg = <0x50>;
+ };
+
+ eeprom@53 {
+ compatible = "atmel,24c128";
+ reg = <0x53>;
+ };
+
+ eeprom@52 {
+ compatible = "atmel,24c128";
+ reg = <0x52>;
+ };
+};
+
+&i2c11 {
+ status = "okay";
+
+ eeprom@51 {
+ compatible = "atmel,24c128";
+ reg = <0x51>;
+ };
+
+ eeprom@50 {
+ compatible = "atmel,24c128";
+ reg = <0x50>;
+ };
+
+ eeprom@53 {
+ compatible = "atmel,24c128";
+ reg = <0x53>;
+ };
+
+ eeprom@52 {
+ compatible = "atmel,24c128";
+ reg = <0x52>;
+ };
+};
+
+&i2c12 {
+ status = "okay";
+};
+
+&i2c13 {
+ status = "okay";
+
+ eeprom@51 {
+ compatible = "atmel,24c128";
+ reg = <0x51>;
+ };
+
+ eeprom@50 {
+ compatible = "atmel,24c128";
+ reg = <0x50>;
+ };
+
+ eeprom@53 {
+ compatible = "atmel,24c128";
+ reg = <0x53>;
+ };
+
+ eeprom@52 {
+ compatible = "atmel,24c128";
+ reg = <0x52>;
+ };
+};
+
+&i2c14 {
+ status = "okay";
+
+ i2c-switch@70 {
+ compatible = "nxp,pca9546";
+ reg = <0x70>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+ i2c-mux-idle-disconnect;
+
+ i2c14mux0chn0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+ };
+
+ i2c14mux0chn1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ eeprom@51 {
+ compatible = "atmel,24c32";
+ reg = <0x51>;
+ };
+ };
+
+ i2c14mux0chn2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ eeprom@50 {
+ compatible = "atmel,24c32";
+ reg = <0x50>;
+ };
+ };
+ };
+
+ i2c-switch@71 {
+ compatible = "nxp,pca9546";
+ reg = <0x71>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+ i2c-mux-idle-disconnect;
+
+ i2c14mux1chn0: i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+ eeprom@50 {
+ compatible = "atmel,24c32";
+ reg = <0x50>;
+ };
+ };
+
+ i2c14mux1chn1: i2c@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ eeprom@50 {
+ compatible = "atmel,24c32";
+ reg = <0x50>;
+ };
+ };
+
+ i2c14mux1chn2: i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ eeprom@50 {
+ compatible = "atmel,24c32";
+ reg = <0x50>;
+ };
+ };
+
+ i2c14mux1chn3: i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <3>;
+ eeprom@50 {
+ compatible = "atmel,24c32";
+ reg = <0x50>;
+ };
+ };
+ };
+};
+
+&i2c15 {
+ status = "okay";
+};
+
&ehci1 {
status = "okay";
};
--
2.27.0
next prev parent reply other threads:[~2021-03-29 15:01 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-29 14:59 [PATCH 00/22] ARM: dts: aspeed: Updates for Rainier and Everest machines Eddie James
2021-03-29 14:59 ` [PATCH 01/22] ARM: dts: aspeed: rainier: Add Operator Panel LEDs Eddie James
2021-03-29 15:00 ` [PATCH 02/22] ARM: dts: aspeed: rainier: Add directly controlled LEDs Eddie James
2021-03-29 15:00 ` [PATCH 03/22] ARM: dts: aspeed: rainier: Add gpio-keys-polled for fans Eddie James
2021-03-29 15:00 ` [PATCH 04/22] ARM: dts: aspeed: rainier: Add additional processor CFAMs Eddie James
2021-03-29 15:00 ` [PATCH 05/22] ARM: dts: aspeed: rainier: Add leds that are off PCA9552 Eddie James
2021-03-29 15:00 ` [PATCH 06/22] ARM: dts: aspeed: rainier: Add leds that are off pic16f882 Eddie James
2021-03-29 15:00 ` [PATCH 07/22] ARM: dts: aspeed: rainier: Add leds on optional DASD cards Eddie James
2021-03-29 15:00 ` [PATCH 08/22] ARM: dts: aspeed: rainier: Add leds on optional PCI cable cards Eddie James
2021-03-29 15:00 ` [PATCH 09/22] ARM: dts: aspeed: rainier: Add presence GPIOs Eddie James
2021-03-29 15:00 ` [PATCH 10/22] ARM: dts: aspeed: rainier: Enable fan watchdog Eddie James
2021-03-29 15:00 ` [PATCH 11/22] ARM: dts: aspeed: rainier 4U: Fix fan configuration Eddie James
2021-03-30 0:23 ` kernel test robot
2021-03-29 15:00 ` Eddie James [this message]
2021-03-29 15:00 ` [PATCH 13/22] ARM: dts: Aspeed: Everest: Add max31785 fan controller device Eddie James
2021-03-29 15:00 ` [PATCH 14/22] ARM: dts: Aspeed: Everest: Add FSI CFAMs and re-number engines Eddie James
2021-03-29 15:00 ` [PATCH 15/22] ARM: dts: Aspeed: Everest: Add pca9552 fan presence Eddie James
2021-04-07 22:34 ` Brandon Wyman
2021-03-29 15:00 ` [PATCH 16/22] ARM: dts: aspeed: everest: Add power supply i2c devices Eddie James
2021-03-29 15:00 ` [PATCH 17/22] ARM: dts: aspeed: everest: Add UCD90320 power sequencer Eddie James
2021-03-29 15:00 ` [PATCH 18/22] ARM: dts: aspeed: everest: GPIOs support Eddie James
2021-04-07 22:19 ` Brandon Wyman
2021-03-29 15:00 ` [PATCH 19/22] ARM: dts: Aspeed: Everest: Add RTC Eddie James
2021-03-29 15:00 ` [PATCH 20/22] ARM: dts: aspeed: everest: Enable fan watchdog Eddie James
2021-04-08 0:34 ` Andrew Jeffery
2021-03-29 15:00 ` [PATCH 21/22] ARM: dts: aspeed: rainier: Support pass 2 planar Eddie James
2021-03-30 3:57 ` kernel test robot
2021-03-29 15:00 ` [PATCH 22/22] ARM: dts: aspeed: Add Rainier 1S4U machine Eddie James
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210329150020.13632-13-eajames@linux.ibm.com \
--to=eajames@linux.ibm.com \
--cc=andrew@aj.id.au \
--cc=devicetree@vger.kernel.org \
--cc=joel@jms.id.au \
--cc=linux-aspeed@lists.ozlabs.org \
--cc=priyanga24@in.ibm.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).