* [PATCH 1/2] drm/panel: simple: Add support for EDT ETMV570G2DHU panel
@ 2021-03-30 7:09 Yunus Bas
2021-03-30 7:09 ` [PATCH 2/2] drm/panel: simple: Add support for EDT ETM0350G0DH6 panel Yunus Bas
2021-03-30 22:47 ` [PATCH 1/2] drm/panel: simple: Add support for EDT ETMV570G2DHU panel Rob Herring
0 siblings, 2 replies; 4+ messages in thread
From: Yunus Bas @ 2021-03-30 7:09 UTC (permalink / raw)
To: dri-devel, thierry.reding, sam; +Cc: devicetree, airlied, daniel, robh+dt
From: Stefan Riedmueller <s.riedmueller@phytec.de>
This patch adds support for the EDT ETMV570G2DHU 5.7" (640x480) lcd panel
to DRM simple panel driver.
Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Signed-off-by: Yunus Bas <y.bas@phytec.de>
---
.../bindings/display/panel/panel-simple.yaml | 3 ++
drivers/gpu/drm/panel/panel-simple.c | 29 +++++++++++++++++++
2 files changed, 32 insertions(+)
diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
index 62b0d54d87b7..57be1fa39728 100644
--- a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
+++ b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
@@ -114,6 +114,9 @@ properties:
- edt,etm043080dh6gp
# Emerging Display Technology Corp. 480x272 TFT Display
- edt,etm0430g0dh6
+ # Emerging Display Technology Corp. 5.7" VGA TFT LCD panel with
+ # capacitive touch
+ - edt,etmv570g2dhu
# Emerging Display Technology Corp. WVGA TFT Display with capacitive touch
# Same as ETM0700G0DH6 but with inverted pixel clock.
- edt,etm070080bdh6
diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index 4e2dad314c79..283c17a75376 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -1926,6 +1926,32 @@ static const struct panel_desc edt_et057090dhu = {
.connector_type = DRM_MODE_CONNECTOR_DPI,
};
+static const struct drm_display_mode edt_etmv570g2dhu_mode = {
+ .clock = 25175,
+ .hdisplay = 640,
+ .hsync_start = 640,
+ .hsync_end = 640 + 16,
+ .htotal = 640 + 16 + 30 + 114,
+ .vdisplay = 480,
+ .vsync_start = 480 + 10,
+ .vsync_end = 480 + 10 + 3,
+ .vtotal = 480 + 10 + 3 + 35,
+ .flags = DRM_MODE_FLAG_PVSYNC | DRM_MODE_FLAG_PHSYNC,
+};
+
+static const struct panel_desc edt_etmv570g2dhu = {
+ .modes = &edt_etmv570g2dhu_mode,
+ .num_modes = 1,
+ .bpc = 6,
+ .size = {
+ .width = 115,
+ .height = 86,
+ },
+ .bus_format = MEDIA_BUS_FMT_RGB888_1X24,
+ .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE,
+ .connector_type = DRM_MODE_CONNECTOR_DPI,
+};
+
static const struct drm_display_mode edt_etm0700g0dh6_mode = {
.clock = 33260,
.hdisplay = 800,
@@ -4226,6 +4252,9 @@ static const struct of_device_id platform_of_match[] = {
}, {
.compatible = "edt,et057090dhu",
.data = &edt_et057090dhu,
+ }, {
+ .compatible = "edt,etmv570g2dhu",
+ .data = &edt_etmv570g2dhu,
}, {
.compatible = "edt,et070080dh6",
.data = &edt_etm0700g0dh6,
--
2.30.0
^ permalink raw reply related [flat|nested] 4+ messages in thread* [PATCH 2/2] drm/panel: simple: Add support for EDT ETM0350G0DH6 panel
2021-03-30 7:09 [PATCH 1/2] drm/panel: simple: Add support for EDT ETMV570G2DHU panel Yunus Bas
@ 2021-03-30 7:09 ` Yunus Bas
2021-03-30 22:48 ` Rob Herring
2021-03-30 22:47 ` [PATCH 1/2] drm/panel: simple: Add support for EDT ETMV570G2DHU panel Rob Herring
1 sibling, 1 reply; 4+ messages in thread
From: Yunus Bas @ 2021-03-30 7:09 UTC (permalink / raw)
To: dri-devel, thierry.reding, sam; +Cc: devicetree, airlied, daniel, robh+dt
From: Stefan Riedmueller <s.riedmueller@phytec.de>
This patch adds support for the EDT ETM0350G0DH6 3.5" (320x240) lcd
panel to DRM simple panel driver.
Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Signed-off-by: Yunus Bas <y.bas@phytec.de>
---
.../bindings/display/panel/panel-simple.yaml | 3 ++
drivers/gpu/drm/panel/panel-simple.c | 29 +++++++++++++++++++
2 files changed, 32 insertions(+)
diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
index 57be1fa39728..9a6b42f911d1 100644
--- a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
+++ b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
@@ -107,6 +107,9 @@ properties:
- dlc,dlc1010gig
# Emerging Display Technology Corp. 3.5" QVGA TFT LCD panel
- edt,et035012dm6
+ # Emerging Display Technology Corp. 3.5" WVGA TFT LCD panel with
+ # capacitive multitouch
+ - edt,etm0350g0dh6
# Emerging Display Technology Corp. 5.7" VGA TFT LCD panel
- edt,et057090dhu
- edt,et070080dh6
diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index 283c17a75376..70c25f6e642b 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -1847,6 +1847,32 @@ static const struct panel_desc edt_et035012dm6 = {
.bus_flags = DRM_BUS_FLAG_DE_LOW | DRM_BUS_FLAG_PIXDATA_SAMPLE_POSEDGE,
};
+static const struct drm_display_mode edt_etm0350g0dh6_mode = {
+ .clock = 6520,
+ .hdisplay = 320,
+ .hsync_start = 320 + 20,
+ .hsync_end = 320 + 20 + 68,
+ .htotal = 320 + 20 + 68,
+ .vdisplay = 240,
+ .vsync_start = 240 + 4,
+ .vsync_end = 240 + 4 + 18,
+ .vtotal = 240 + 4 + 18,
+ .flags = DRM_MODE_FLAG_NVSYNC | DRM_MODE_FLAG_NHSYNC,
+};
+
+static const struct panel_desc edt_etm0350g0dh6 = {
+ .modes = &edt_etm0350g0dh6_mode,
+ .num_modes = 1,
+ .bpc = 6,
+ .size = {
+ .width = 70,
+ .height = 53,
+ },
+ .bus_format = MEDIA_BUS_FMT_RGB888_1X24,
+ .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE,
+ .connector_type = DRM_MODE_CONNECTOR_DPI,
+};
+
static const struct drm_display_mode edt_etm043080dh6gp_mode = {
.clock = 10870,
.hdisplay = 480,
@@ -4243,6 +4269,9 @@ static const struct of_device_id platform_of_match[] = {
}, {
.compatible = "edt,et035012dm6",
.data = &edt_et035012dm6,
+ }, {
+ .compatible = "edt,etm0350g0dh6",
+ .data = &edt_etm0350g0dh6,
}, {
.compatible = "edt,etm043080dh6gp",
.data = &edt_etm043080dh6gp,
--
2.30.0
^ permalink raw reply related [flat|nested] 4+ messages in thread* Re: [PATCH 2/2] drm/panel: simple: Add support for EDT ETM0350G0DH6 panel
2021-03-30 7:09 ` [PATCH 2/2] drm/panel: simple: Add support for EDT ETM0350G0DH6 panel Yunus Bas
@ 2021-03-30 22:48 ` Rob Herring
0 siblings, 0 replies; 4+ messages in thread
From: Rob Herring @ 2021-03-30 22:48 UTC (permalink / raw)
To: Yunus Bas; +Cc: dri-devel, thierry.reding, sam, devicetree, airlied, daniel
On Tue, Mar 30, 2021 at 09:09:07AM +0200, Yunus Bas wrote:
> From: Stefan Riedmueller <s.riedmueller@phytec.de>
>
> This patch adds support for the EDT ETM0350G0DH6 3.5" (320x240) lcd
> panel to DRM simple panel driver.
>
> Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
> Signed-off-by: Yunus Bas <y.bas@phytec.de>
> ---
> .../bindings/display/panel/panel-simple.yaml | 3 ++
> drivers/gpu/drm/panel/panel-simple.c | 29 +++++++++++++++++++
> 2 files changed, 32 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
> index 57be1fa39728..9a6b42f911d1 100644
> --- a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
> +++ b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
> @@ -107,6 +107,9 @@ properties:
> - dlc,dlc1010gig
> # Emerging Display Technology Corp. 3.5" QVGA TFT LCD panel
> - edt,et035012dm6
> + # Emerging Display Technology Corp. 3.5" WVGA TFT LCD panel with
> + # capacitive multitouch
> + - edt,etm0350g0dh6
Alpha-numeric order.
> # Emerging Display Technology Corp. 5.7" VGA TFT LCD panel
> - edt,et057090dhu
> - edt,et070080dh6
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH 1/2] drm/panel: simple: Add support for EDT ETMV570G2DHU panel
2021-03-30 7:09 [PATCH 1/2] drm/panel: simple: Add support for EDT ETMV570G2DHU panel Yunus Bas
2021-03-30 7:09 ` [PATCH 2/2] drm/panel: simple: Add support for EDT ETM0350G0DH6 panel Yunus Bas
@ 2021-03-30 22:47 ` Rob Herring
1 sibling, 0 replies; 4+ messages in thread
From: Rob Herring @ 2021-03-30 22:47 UTC (permalink / raw)
To: Yunus Bas; +Cc: dri-devel, thierry.reding, sam, devicetree, airlied, daniel
On Tue, Mar 30, 2021 at 09:09:06AM +0200, Yunus Bas wrote:
> From: Stefan Riedmueller <s.riedmueller@phytec.de>
>
> This patch adds support for the EDT ETMV570G2DHU 5.7" (640x480) lcd panel
> to DRM simple panel driver.
>
> Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de>
> Signed-off-by: Yunus Bas <y.bas@phytec.de>
> ---
> .../bindings/display/panel/panel-simple.yaml | 3 ++
Bindings should be their own patch.
> drivers/gpu/drm/panel/panel-simple.c | 29 +++++++++++++++++++
> 2 files changed, 32 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
> index 62b0d54d87b7..57be1fa39728 100644
> --- a/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
> +++ b/Documentation/devicetree/bindings/display/panel/panel-simple.yaml
> @@ -114,6 +114,9 @@ properties:
> - edt,etm043080dh6gp
> # Emerging Display Technology Corp. 480x272 TFT Display
> - edt,etm0430g0dh6
> + # Emerging Display Technology Corp. 5.7" VGA TFT LCD panel with
> + # capacitive touch
> + - edt,etmv570g2dhu
> # Emerging Display Technology Corp. WVGA TFT Display with capacitive touch
> # Same as ETM0700G0DH6 but with inverted pixel clock.
> - edt,etm070080bdh6
> diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
> index 4e2dad314c79..283c17a75376 100644
> --- a/drivers/gpu/drm/panel/panel-simple.c
> +++ b/drivers/gpu/drm/panel/panel-simple.c
> @@ -1926,6 +1926,32 @@ static const struct panel_desc edt_et057090dhu = {
> .connector_type = DRM_MODE_CONNECTOR_DPI,
> };
>
> +static const struct drm_display_mode edt_etmv570g2dhu_mode = {
> + .clock = 25175,
> + .hdisplay = 640,
> + .hsync_start = 640,
> + .hsync_end = 640 + 16,
> + .htotal = 640 + 16 + 30 + 114,
> + .vdisplay = 480,
> + .vsync_start = 480 + 10,
> + .vsync_end = 480 + 10 + 3,
> + .vtotal = 480 + 10 + 3 + 35,
> + .flags = DRM_MODE_FLAG_PVSYNC | DRM_MODE_FLAG_PHSYNC,
> +};
> +
> +static const struct panel_desc edt_etmv570g2dhu = {
> + .modes = &edt_etmv570g2dhu_mode,
> + .num_modes = 1,
> + .bpc = 6,
> + .size = {
> + .width = 115,
> + .height = 86,
> + },
> + .bus_format = MEDIA_BUS_FMT_RGB888_1X24,
> + .bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_PIXDATA_DRIVE_NEGEDGE,
> + .connector_type = DRM_MODE_CONNECTOR_DPI,
> +};
> +
> static const struct drm_display_mode edt_etm0700g0dh6_mode = {
> .clock = 33260,
> .hdisplay = 800,
> @@ -4226,6 +4252,9 @@ static const struct of_device_id platform_of_match[] = {
> }, {
> .compatible = "edt,et057090dhu",
> .data = &edt_et057090dhu,
> + }, {
> + .compatible = "edt,etmv570g2dhu",
> + .data = &edt_etmv570g2dhu,
> }, {
> .compatible = "edt,et070080dh6",
> .data = &edt_etm0700g0dh6,
> --
> 2.30.0
>
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2021-03-30 22:48 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2021-03-30 7:09 [PATCH 1/2] drm/panel: simple: Add support for EDT ETMV570G2DHU panel Yunus Bas
2021-03-30 7:09 ` [PATCH 2/2] drm/panel: simple: Add support for EDT ETM0350G0DH6 panel Yunus Bas
2021-03-30 22:48 ` Rob Herring
2021-03-30 22:47 ` [PATCH 1/2] drm/panel: simple: Add support for EDT ETMV570G2DHU panel Rob Herring
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).