From: Claudiu Beznea <claudiu.beznea@microchip.com>
To: <nicolas.ferre@microchip.com>, <alexandre.belloni@bootlin.com>,
<ludovic.desroches@microchip.com>, <robh+dt@kernel.org>,
<linux@armlinux.org.uk>
Cc: <linux-arm-kernel@lists.infradead.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
Claudiu Beznea <claudiu.beznea@microchip.com>
Subject: [PATCH 18/24] ARM: at91: pm: add sama7g5 ddr phy controller
Date: Wed, 31 Mar 2021 13:59:02 +0300 [thread overview]
Message-ID: <20210331105908.23027-19-claudiu.beznea@microchip.com> (raw)
In-Reply-To: <20210331105908.23027-1-claudiu.beznea@microchip.com>
SAMA7G5 self-refresh procedure accesses also the DDR PHY registers.
Adapt the code so that the at91_dt_ramc() to look also for DDR PHYs,
in case it is mandatory.
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
---
arch/arm/mach-at91/pm.c | 27 +++++++++++++++++++++------
1 file changed, 21 insertions(+), 6 deletions(-)
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 5dc942a2012d..4dec7216a80e 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -552,7 +552,12 @@ static const struct of_device_id ramc_ids[] __initconst = {
{ /*sentinel*/ }
};
-static __init void at91_dt_ramc(void)
+static const struct of_device_id ramc_phy_ids[] __initconst = {
+ { .compatible = "microchip,sama7g5-ddr3phy", },
+ { /* Sentinel. */ },
+};
+
+static __init void at91_dt_ramc(bool phy_mandatory)
{
struct device_node *np;
const struct of_device_id *of_id;
@@ -578,6 +583,16 @@ static __init void at91_dt_ramc(void)
if (!idx)
panic(pr_fmt("unable to find compatible ram controller node in dtb\n"));
+ /* Lookup for DDR PHY node, if any. */
+ for_each_matching_node_and_match(np, ramc_phy_ids, &of_id) {
+ soc_pm.data.ramc_phy = of_iomap(np, 0);
+ if (!soc_pm.data.ramc_phy)
+ panic(pr_fmt("unable to map ramc phy cpu registers\n"));
+ }
+
+ if (phy_mandatory && !soc_pm.data.ramc_phy)
+ panic(pr_fmt("DDR PHY is mandatory!\n"));
+
if (!standby) {
pr_warn("ramc no standby function available\n");
return;
@@ -936,7 +951,7 @@ void __init at91rm9200_pm_init(void)
soc_pm.data.standby_mode = AT91_PM_STANDBY;
soc_pm.data.suspend_mode = AT91_PM_ULP0;
- at91_dt_ramc();
+ at91_dt_ramc(false);
/*
* AT91RM9200 SDRAM low-power mode cannot be used with self-refresh.
@@ -960,7 +975,7 @@ void __init sam9x60_pm_init(void)
at91_pm_modes_validate(modes, ARRAY_SIZE(modes));
at91_pm_modes_init(iomaps, ARRAY_SIZE(iomaps));
- at91_dt_ramc();
+ at91_dt_ramc(false);
at91_pm_init(NULL);
soc_pm.ws_ids = sam9x60_ws_ids;
@@ -980,7 +995,7 @@ void __init at91sam9_pm_init(void)
soc_pm.data.standby_mode = AT91_PM_STANDBY;
soc_pm.data.suspend_mode = AT91_PM_ULP0;
- at91_dt_ramc();
+ at91_dt_ramc(false);
at91_pm_init(at91sam9_idle);
}
@@ -994,7 +1009,7 @@ void __init sama5_pm_init(void)
return;
at91_pm_modes_validate(modes, ARRAY_SIZE(modes));
- at91_dt_ramc();
+ at91_dt_ramc(false);
at91_pm_init(NULL);
}
@@ -1015,7 +1030,7 @@ void __init sama5d2_pm_init(void)
at91_pm_modes_validate(modes, ARRAY_SIZE(modes));
at91_pm_modes_init(iomaps, ARRAY_SIZE(iomaps));
- at91_dt_ramc();
+ at91_dt_ramc(false);
at91_pm_init(NULL);
soc_pm.ws_ids = sama5d2_ws_ids;
--
2.25.1
next prev parent reply other threads:[~2021-03-31 11:00 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-31 10:58 [PATCH 00/24] ARM: at91: pm: add support for sama7g5 Claudiu Beznea
2021-03-31 10:58 ` [PATCH 01/24] ARM: at91: pm: move pm_bu to soc_pm data structure Claudiu Beznea
2021-03-31 14:44 ` Alexandre Belloni
2021-03-31 10:58 ` [PATCH 02/24] ARM: at91: pm: move the setup of soc_pm.bu->suspended Claudiu Beznea
2021-03-31 10:58 ` [PATCH 03/24] ARM: at91: pm: document at91_soc_pm structure Claudiu Beznea
2021-03-31 10:58 ` [PATCH 04/24] ARM: at91: pm: check for different controllers in at91_pm_modes_init() Claudiu Beznea
2021-03-31 10:58 ` [PATCH 05/24] ARM: at91: pm: do not initialize pdev Claudiu Beznea
2021-03-31 10:58 ` [PATCH 06/24] ARM: at91: pm: use r7 instead of tmp1 Claudiu Beznea
2021-03-31 10:58 ` [PATCH 07/24] ARM: at91: pm: avoid push and pop on stack while memory is in self-refersh Claudiu Beznea
2021-03-31 10:58 ` [PATCH 08/24] ARM: at91: pm: s/CONFIG_SOC_SAM9X60/CONFIG_HAVE_AT91_SAM9X60_PLL/g Claudiu Beznea
2021-03-31 10:58 ` [PATCH 09/24] ARM: at91: pm: add support for waiting MCK1..4 Claudiu Beznea
2021-03-31 10:58 ` [PATCH 10/24] ARM: at91: sfrbu: add sfrbu registers definitions for sama7g5 Claudiu Beznea
2021-03-31 15:54 ` Alexandre Belloni
2021-04-01 9:34 ` Claudiu.Beznea
2021-03-31 10:58 ` [PATCH 11/24] ARM: at91: ddr: add registers definitions for sama7g5's ddr Claudiu Beznea
2021-03-31 10:58 ` [PATCH 12/24] ARM: at91: pm: add self-refresh support for sama7g5 Claudiu Beznea
2021-03-31 10:58 ` [PATCH 13/24] ARM: at91: pm: add support for MCK1..4 save/restore for ulp modes Claudiu Beznea
2021-03-31 10:58 ` [PATCH 14/24] ARM: at91: pm: add support for 2.5V LDO regulator control Claudiu Beznea
2021-03-31 10:58 ` [PATCH 15/24] ARM: at91: pm: wait for ddr power mode off Claudiu Beznea
2021-03-31 10:59 ` [PATCH 16/24] dt-bindings: atmel-sysreg: add bindings for sama7g5 Claudiu Beznea
2021-03-31 10:59 ` [PATCH 17/24] ARM: at91: pm: add sama7g5 ddr controller Claudiu Beznea
2021-03-31 10:59 ` Claudiu Beznea [this message]
2021-03-31 10:59 ` [PATCH 19/24] ARM: at91: pm: save ddr phy calibration data to securam Claudiu Beznea
2021-03-31 10:59 ` [PATCH 20/24] ARM: at91: pm: add backup mode support for SAMA7G5 Claudiu Beznea
2021-03-31 10:59 ` [PATCH 21/24] ARM: at91: pm: add sama7g5's pmc Claudiu Beznea
2021-03-31 10:59 ` [PATCH 22/24] ARM: at91: sama7: introduce sama7 SoC family Claudiu Beznea
2021-03-31 16:01 ` Alexandre Belloni
2021-04-01 9:38 ` Claudiu.Beznea
2021-04-01 10:24 ` Claudiu.Beznea
2021-04-08 15:24 ` Nicolas Ferre
2021-04-08 17:44 ` Alexandre Belloni
2021-04-08 15:30 ` Nicolas Ferre
2021-03-31 10:59 ` [PATCH 23/24] ARM: at91: pm: add pm support for SAMA7G5 Claudiu Beznea
2021-03-31 10:59 ` [PATCH 24/24] ARM: at91: pm: add sama7g5 shdwc Claudiu Beznea
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210331105908.23027-19-claudiu.beznea@microchip.com \
--to=claudiu.beznea@microchip.com \
--cc=alexandre.belloni@bootlin.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=ludovic.desroches@microchip.com \
--cc=nicolas.ferre@microchip.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).