Re: [PATCH 1/2] dt-bindings: pinctrl: qcom-pmic-gpio: Add pm8008 support

[Bjorn Andersson <bjorn.andersson@linaro.org>]

On Wed 07 Apr 17:34 CDT 2021, Guru Das Srinagesh wrote:

> Add support for the PM8008 GPIO support to the Qualcomm PMIC GPIO
> binding.
> 
> Signed-off-by: Guru Das Srinagesh <gurus@codeaurora.org>
> ---
>  Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt | 2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt
> index 70e119b..1818481 100644
> --- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt
> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.txt
> @@ -36,6 +36,7 @@ PMIC's from Qualcomm.
>  		    "qcom,pm6150-gpio"
>  		    "qcom,pm6150l-gpio"
>  		    "qcom,pmx55-gpio"
> +		    "qcom,pm8008-gpio"

Please keep these sorted alphabetically (i.e. '8' < 'x')

With that

Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Regards,
Bjorn

>  
>  		    And must contain either "qcom,spmi-gpio" or "qcom,ssbi-gpio"
>  		    if the device is on an spmi bus or an ssbi bus respectively
> @@ -125,6 +126,7 @@ to specify in a pin configuration subnode:
>  		    gpio1-gpio12 for pm6150l
>  		    gpio1-gpio11 for pmx55 (holes on gpio3, gpio7, gpio10
>  					    and gpio11)
> +		    gpio1-gpio2 for pm8008
>  
>  - function:
>  	Usage: required
> -- 
> The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project
>