[PATCH v2 3/3] dt-bindings: ata: Add device tree binding fir Mikrotik RB532 PATA controller

[PATCH v2 3/3] dt-bindings: ata: Add device tree binding fir Mikrotik RB532 PATA controller

[Thomas Bogendoerfer]

Add YAML devicetree binding for Mikrotik RB532 PATA controller.

Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
---
 .../bindings/ata/mikrotek,rb532-pata.yaml     | 43 +++++++++++++++++++
 1 file changed, 43 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/ata/mikrotek,rb532-pata.yaml

diff --git a/Documentation/devicetree/bindings/ata/mikrotek,rb532-pata.yaml b/Documentation/devicetree/bindings/ata/mikrotek,rb532-pata.yaml
new file mode 100644
index 000000000000..f74880c4fd82
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/mikrotek,rb532-pata.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/mikrotek,rb532-pata.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mikrotek RB532 PATA Controller bindings
+
+maintainers:
+  - Thomas Bogendoerfer <tsbogend@alpha.franken.de>
+
+properties:
+  compatible:
+    const: mikrotik,rb532-pata
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  gpio:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - gpio
+
+additionalProperties: false
+
+examples:
+  - |
+    cf@18a10000 {
+        compatible = "mikrotik,rb532-pata";
+        reg = <0x18a10000 0xc04>;
+
+        gpio = <&gpio0 13 0>;
+
+        interrupt-parent = <&gpio0>;
+        interrupts = <13 0>;
+    };
-- 
2.29.2

Re: [PATCH v2 3/3] dt-bindings: ata: Add device tree binding fir Mikrotik RB532 PATA controller

[Rob Herring]

On Wed, Apr 28, 2021 at 06:33:36PM +0200, Thomas Bogendoerfer wrote:
> Add YAML devicetree binding for Mikrotik RB532 PATA controller.
> 
> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
> ---
>  .../bindings/ata/mikrotek,rb532-pata.yaml     | 43 +++++++++++++++++++
>  1 file changed, 43 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/ata/mikrotek,rb532-pata.yaml
> 
> diff --git a/Documentation/devicetree/bindings/ata/mikrotek,rb532-pata.yaml b/Documentation/devicetree/bindings/ata/mikrotek,rb532-pata.yaml
> new file mode 100644
> index 000000000000..f74880c4fd82
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/ata/mikrotek,rb532-pata.yaml
> @@ -0,0 +1,43 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/ata/mikrotek,rb532-pata.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Mikrotek RB532 PATA Controller bindings

We have a common binding for this (ata/pata-common.yaml). Really, all 
you'd gain is how to support 2 devices is defined. Should you use that? 
Is CompactFlash only a single device, I don't remember. If so, is that a 
limitation for the board or could 2 devices be supported?

> +
> +maintainers:
> +  - Thomas Bogendoerfer <tsbogend@alpha.franken.de>
> +
> +properties:
> +  compatible:
> +    const: mikrotik,rb532-pata
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  gpio:

'<name>-gpios' is the preferred form (even for singular).

> +    maxItems: 1
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - gpio
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    cf@18a10000 {
> +        compatible = "mikrotik,rb532-pata";
> +        reg = <0x18a10000 0xc04>;
> +
> +        gpio = <&gpio0 13 0>;
> +
> +        interrupt-parent = <&gpio0>;
> +        interrupts = <13 0>;
> +    };
> -- 
> 2.29.2
> 

Re: [PATCH v2 3/3] dt-bindings: ata: Add device tree binding fir Mikrotik RB532 PATA controller

[Thomas Bogendoerfer]

On Mon, May 03, 2021 at 02:28:05PM -0500, Rob Herring wrote:
> On Wed, Apr 28, 2021 at 06:33:36PM +0200, Thomas Bogendoerfer wrote:
> > Add YAML devicetree binding for Mikrotik RB532 PATA controller.
> > 
> > Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
> > ---
> >  .../bindings/ata/mikrotek,rb532-pata.yaml     | 43 +++++++++++++++++++
> >  1 file changed, 43 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/ata/mikrotek,rb532-pata.yaml
> > 
> > diff --git a/Documentation/devicetree/bindings/ata/mikrotek,rb532-pata.yaml b/Documentation/devicetree/bindings/ata/mikrotek,rb532-pata.yaml
> > new file mode 100644
> > index 000000000000..f74880c4fd82
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/ata/mikrotek,rb532-pata.yaml
> > @@ -0,0 +1,43 @@
> > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/ata/mikrotek,rb532-pata.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Mikrotek RB532 PATA Controller bindings
> 
> We have a common binding for this (ata/pata-common.yaml). Really, all 
> you'd gain is how to support 2 devices is defined. Should you use that? 
> Is CompactFlash only a single device, I don't remember. If so, is that a 
> limitation for the board or could 2 devices be supported?

there is only one device possible. So what do I need to put into the
yaml file for the driver ?  

Thomas.

-- 
Crap can work. Given enough thrust pigs will fly, but it's not necessarily a
good idea.                                                [ RFC1925, 2.3 ]