From: Steven Lee <steven_lee@aspeedtech.com>
To: Andrew Jeffery <andrew@aj.id.au>
Cc: Ulf Hansson <ulf.hansson@linaro.org>,
Rob Herring <robh+dt@kernel.org>, Joel Stanley <joel@jms.id.au>,
Adrian Hunter <adrian.hunter@intel.com>,
Philipp Zabel <p.zabel@pengutronix.de>,
Ryan Chen <ryanchen.aspeed@gmail.com>,
"moderated list:ASPEED SD/MMC DRIVER"
<linux-aspeed@lists.ozlabs.org>,
"moderated list:ASPEED SD/MMC DRIVER" <openbmc@lists.ozlabs.org>,
linux-mmc <linux-mmc@vger.kernel.org>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@vger.kernel.org>,
"moderated list:ARM/ASPEED MACHINE SUPPORT"
<linux-arm-kernel@lists.infradead.org>,
open list <linux-kernel@vger.kernel.org>,
Hongwei Zhang <Hongweiz@ami.com>,
Ryan Chen <ryan_chen@aspeedtech.com>,
Chin-Ting Kuo <chin-ting_kuo@aspeedtech.com>
Subject: Re: [PATCH v3 4/5] mmc: sdhci-of-aspeed: Add a helper for updating capability register.
Date: Fri, 7 May 2021 14:59:18 +0800 [thread overview]
Message-ID: <20210507065918.GE23749@aspeedtech.com> (raw)
In-Reply-To: <fecc9021-ab4b-4047-a664-47b1bd867cb3@www.fastmail.com>
The 05/07/2021 10:13, Andrew Jeffery wrote:
> Hi Steven,
>
> I have some minor comments. I expect you're going to do a v4 of the
> series, so if you'd like to clean them up in the process I'd appreciate
> it.
>
Yes, I am going to prepare v4 patch for meeting reviewer's expectation
including your comment in this patch.
I've learned a lot from your suggestion for driver upstream.
Many thanks!
> However, from a pragmatic standpoint I think the patch is in good shape.
>
> On Thu, 6 May 2021, at 19:33, Steven Lee wrote:
> > The patch add a new function aspeed_sdc_set_slot_capability() for
> > updating sdhci capability register.
>
> The commit message should explain why the patch is necessary and not
> what it does, as what it does is contained in the diff.
>
> It's okay to explain *how* the patch acheives its goals if the
> implementation is subtle or complex.
>
> Maybe the commit message could be something like:
>
>
> ```
> Configure the SDHCIs as specified by the devicetree.
>
> The hardware provides capability configuration registers for each SDHCI
> in the global configuration space for the SD controller. Writes to the
> global capability registers are mirrored to the capability registers in
> the associated SDHCI. Configuration of the capabilities must be written
> through the mirror registers prior to initialisation of the SDHCI.
> ```
>
Thanks for the exmaple, I will modify my commit message.
> >
> > Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
> > ---
> > drivers/mmc/host/sdhci-of-aspeed.c | 57 ++++++++++++++++++++++++++++++
> > 1 file changed, 57 insertions(+)
> >
> > diff --git a/drivers/mmc/host/sdhci-of-aspeed.c
> > b/drivers/mmc/host/sdhci-of-aspeed.c
> > index d001c51074a0..4979f98ffb52 100644
> > --- a/drivers/mmc/host/sdhci-of-aspeed.c
> > +++ b/drivers/mmc/host/sdhci-of-aspeed.c
> > @@ -31,6 +31,11 @@
> > #define ASPEED_SDC_S0_PHASE_OUT_EN GENMASK(1, 0)
> > #define ASPEED_SDC_PHASE_MAX 31
> >
> > +/* SDIO{10,20} */
> > +#define ASPEED_SDC_CAP1_1_8V (0 * 32 + 26)
> > +/* SDIO{14,24} */
> > +#define ASPEED_SDC_CAP2_SDR104 (1 * 32 + 1)
> > +
> > struct aspeed_sdc {
> > struct clk *clk;
> > struct resource *res;
> > @@ -70,8 +75,42 @@ struct aspeed_sdhci {
> > u32 width_mask;
> > struct mmc_clk_phase_map phase_map;
> > const struct aspeed_sdhci_phase_desc *phase_desc;
> > +
> > };
> >
> > +/*
> > + * The function sets the mirror register for updating
> > + * capbilities of the current slot.
> > + *
> > + * slot | capability | caps_reg | mirror_reg
> > + * -----|-------------|----------|------------
> > + * 0 | CAP1_1_8V | SDIO140 | SDIO10
> > + * 0 | CAP2_SDR104 | SDIO144 | SDIO14
> > + * 1 | CAP1_1_8V | SDIO240 | SDIO20
> > + * 1 | CAP2_SDR104 | SDIO244 | SDIO24
>
> It would be nice to align the columns to improve readability.
>
Columns seems are aligned in my mail client(mutt) and my editor(vim).
I paste the above comment in Notepad++, columns are aligned as well.
> > +static void aspeed_sdc_set_slot_capability(struct sdhci_host *host,
> > + struct aspeed_sdc *sdc,
> > + int capability,
> > + bool enable,
> > + u8 slot)
>
> I prefer we don't take up so much vertical space here. I think this
> could be just a couple of lines with multiple variables per line. We
> can go to 100 chars per line.
>
I will change the function as the follows:
static void aspeed_sdc_set_slot_capability(struct sdhci_host *host, struct aspeed_sdc *sdc,
int capability, bool enable, u8 slot)
> > +{
> > + u8 cap_reg;
> > + u32 mirror_reg_offset, cap_val;
>
> The rest of the driver follows "reverse christmas tree" (longest to
> shortest declaration) style, so I prefer we try to maintain consistency
> where we can. Essentially, declare them in this order:
>
> u32 mirror_reg_offset;
> u32 cap_val;
> u8 cap_reg;
>
Will modify it.
> > +
> > + if (slot > 1)
> > + return;
> > +
> > + cap_reg = capability / 32;
> > + cap_val = sdhci_readl(host, 0x40 + (cap_reg * 4));
> > + if (enable)
> > + cap_val |= BIT(capability % 32);
> > + else
> > + cap_val &= ~BIT(capability % 32);
> > + mirror_reg_offset = ((slot + 1) * 0x10) + (cap_reg * 4);
> > + writel(cap_val, sdc->regs + mirror_reg_offset);
> > +}
> > +
> > static void aspeed_sdc_configure_8bit_mode(struct aspeed_sdc *sdc,
> > struct aspeed_sdhci *sdhci,
> > bool bus8)
> > @@ -329,6 +368,7 @@ static int aspeed_sdhci_probe(struct platform_device *pdev)
> > {
> > const struct aspeed_sdhci_pdata *aspeed_pdata;
> > struct sdhci_pltfm_host *pltfm_host;
> > + struct device_node *np = pdev->dev.of_node;
>
> Again here with the reverse-christmas-tree style, so:
>
> const struct aspeed_sdhci_pdata *aspeed_pdata;
> struct device_node *np = pdev->dev.of_node;
> struct sdhci_pltfm_host *pltfm_host;
> ...
>
Will modify it.
> > struct aspeed_sdhci *dev;
> > struct sdhci_host *host;
> > struct resource *res;
> > @@ -372,6 +412,23 @@ static int aspeed_sdhci_probe(struct platform_device *pdev)
> >
> > sdhci_get_of_property(pdev);
> >
> > + if (of_property_read_bool(np, "mmc-hs200-1_8v") ||
> > + of_property_read_bool(np, "sd-uhs-sdr104")) {
> > + aspeed_sdc_set_slot_capability(host,
> > + dev->parent,
> > + ASPEED_SDC_CAP1_1_8V,
> > + true,
> > + slot);
>
> Again, this would be nicer if we compress it to as few lines as possible.
>
Will modify the function as follows:
aspeed_sdc_set_slot_capability(host, dev->parent, ASPEED_SDC_CAP1_1_8V, true, slot);
> > + }
> > +
> > + if (of_property_read_bool(np, "sd-uhs-sdr104")) {
> > + aspeed_sdc_set_slot_capability(host,
> > + dev->parent,
> > + ASPEED_SDC_CAP2_SDR104,
> > + true,
> > + slot);
>
> As above.
>
Will modify the function as follows:
aspeed_sdc_set_slot_capability(host, dev->parent, ASPEED_SDC_CAP2_SDR104,
true, slot);
> Cheers,
>
> Andrew
next prev parent reply other threads:[~2021-05-07 6:59 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-06 10:03 [PATCH v3 0/5] mmc: sdhci-of-aspeed: Support toggling SD bus signal Steven Lee
2021-05-06 10:03 ` [PATCH v3 1/5] dt-bindings: mmc: sdhci-of-aspeed: Add an example for AST2600-A2 EVB Steven Lee
2021-05-07 1:13 ` Rob Herring
2021-05-07 3:13 ` Steven Lee
2021-05-07 17:21 ` Rob Herring
2021-05-10 2:32 ` Steven Lee
2021-05-06 10:03 ` [PATCH v3 2/5] ARM: dts: aspeed: ast2600evb: Add comment for gpio regulator of sdhci Steven Lee
2021-05-07 1:40 ` Andrew Jeffery
2021-05-07 3:30 ` Steven Lee
2021-05-07 3:42 ` Andrew Jeffery
2021-05-06 10:03 ` [PATCH v3 3/5] ARM: dts: aspeed: ast2600evb: Add phase correction for emmc controller Steven Lee
2021-05-07 1:34 ` Andrew Jeffery
2021-05-06 10:03 ` [PATCH v3 4/5] mmc: sdhci-of-aspeed: Add a helper for updating capability register Steven Lee
2021-05-07 2:13 ` Andrew Jeffery
2021-05-07 6:59 ` Steven Lee [this message]
2021-05-07 7:07 ` Andrew Jeffery
2021-05-06 10:03 ` [PATCH v3 5/5] mmc: sdhci-of-aspeed: Assert/Deassert reset signal before probing eMMC Steven Lee
2021-05-06 10:24 ` Philipp Zabel
2021-05-07 1:32 ` Andrew Jeffery
2021-05-07 6:24 ` Steven Lee
2021-05-07 7:36 ` Andrew Jeffery
2021-05-10 6:03 ` Steven Lee
2021-05-13 0:42 ` Andrew Jeffery
2021-05-14 2:09 ` Steven Lee
2021-05-14 2:37 ` Andrew Jeffery
2021-05-19 10:57 ` Steven Lee
2021-05-19 23:09 ` Andrew Jeffery
2021-05-07 6:02 ` Steven Lee
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210507065918.GE23749@aspeedtech.com \
--to=steven_lee@aspeedtech.com \
--cc=Hongweiz@ami.com \
--cc=adrian.hunter@intel.com \
--cc=andrew@aj.id.au \
--cc=chin-ting_kuo@aspeedtech.com \
--cc=devicetree@vger.kernel.org \
--cc=joel@jms.id.au \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-aspeed@lists.ozlabs.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=openbmc@lists.ozlabs.org \
--cc=p.zabel@pengutronix.de \
--cc=robh+dt@kernel.org \
--cc=ryan_chen@aspeedtech.com \
--cc=ryanchen.aspeed@gmail.com \
--cc=ulf.hansson@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).