From: Shawn Guo <shawnguo@kernel.org>
To: Adam Ford <aford173@gmail.com>
Cc: linux-arm-kernel@lists.infradead.org,
Rob Herring <robh+dt@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>,
NXP Linux Team <linux-imx@nxp.com>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 1/2] arm64: dts: imx8mn: Add spba1 bus
Date: Tue, 11 May 2021 10:46:04 +0800 [thread overview]
Message-ID: <20210511024604.GE3425@dragon> (raw)
In-Reply-To: <20210406013344.124255-1-aford173@gmail.com>
On Mon, Apr 05, 2021 at 08:33:42PM -0500, Adam Ford wrote:
> The i.MX8MN has an SPBA bus which covers much of the audio, but
> there is a second SPBA bus which covers many of the serial interfaces
> like SPI and UARTs currently missing from the device tree. The reference
> manual calls the bus handling the audio peripherals SPBA2, and the bus
> handling the serial peripherals is called SPBA1.
>
> Rename the existing spba bus to spba2 and add spba1.
>
> Signed-off-by: Adam Ford <aford173@gmail.com>
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
> index 4dac4da38f4c..e961acd237a8 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
> @@ -255,7 +255,7 @@ aips1: bus@30000000 {
> #size-cells = <1>;
> ranges;
>
> - spba: spba-bus@30000000 {
> + spba2: spba-bus@30000000 {
> compatible = "fsl,spba-bus", "simple-bus";
Just noticed that "fsl,spba-bus" is undocumented, no?
Also may I ask if you have a real use case for this bus node?
Shawn
> #address-cells = <1>;
> #size-cells = <1>;
> @@ -681,80 +681,88 @@ aips3: bus@30800000 {
> #size-cells = <1>;
> ranges;
>
> - ecspi1: spi@30820000 {
> - compatible = "fsl,imx8mn-ecspi", "fsl,imx51-ecspi";
> + spba1: spba-bus@30800000 {
> + compatible = "fsl,spba-bus", "simple-bus";
> #address-cells = <1>;
> - #size-cells = <0>;
> - reg = <0x30820000 0x10000>;
> - interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clk IMX8MN_CLK_ECSPI1_ROOT>,
> - <&clk IMX8MN_CLK_ECSPI1_ROOT>;
> - clock-names = "ipg", "per";
> - dmas = <&sdma1 0 7 1>, <&sdma1 1 7 2>;
> - dma-names = "rx", "tx";
> - status = "disabled";
> - };
> + #size-cells = <1>;
> + reg = <0x30800000 0x100000>;
> + ranges;
>
> - ecspi2: spi@30830000 {
> - compatible = "fsl,imx8mn-ecspi", "fsl,imx51-ecspi";
> - #address-cells = <1>;
> - #size-cells = <0>;
> - reg = <0x30830000 0x10000>;
> - interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clk IMX8MN_CLK_ECSPI2_ROOT>,
> - <&clk IMX8MN_CLK_ECSPI2_ROOT>;
> - clock-names = "ipg", "per";
> - dmas = <&sdma1 2 7 1>, <&sdma1 3 7 2>;
> - dma-names = "rx", "tx";
> - status = "disabled";
> - };
> + ecspi1: spi@30820000 {
> + compatible = "fsl,imx8mn-ecspi", "fsl,imx51-ecspi";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x30820000 0x10000>;
> + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clk IMX8MN_CLK_ECSPI1_ROOT>,
> + <&clk IMX8MN_CLK_ECSPI1_ROOT>;
> + clock-names = "ipg", "per";
> + dmas = <&sdma1 0 7 1>, <&sdma1 1 7 2>;
> + dma-names = "rx", "tx";
> + status = "disabled";
> + };
>
> - ecspi3: spi@30840000 {
> - compatible = "fsl,imx8mn-ecspi", "fsl,imx51-ecspi";
> - #address-cells = <1>;
> - #size-cells = <0>;
> - reg = <0x30840000 0x10000>;
> - interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clk IMX8MN_CLK_ECSPI3_ROOT>,
> - <&clk IMX8MN_CLK_ECSPI3_ROOT>;
> - clock-names = "ipg", "per";
> - dmas = <&sdma1 4 7 1>, <&sdma1 5 7 2>;
> - dma-names = "rx", "tx";
> - status = "disabled";
> - };
> + ecspi2: spi@30830000 {
> + compatible = "fsl,imx8mn-ecspi", "fsl,imx51-ecspi";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x30830000 0x10000>;
> + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clk IMX8MN_CLK_ECSPI2_ROOT>,
> + <&clk IMX8MN_CLK_ECSPI2_ROOT>;
> + clock-names = "ipg", "per";
> + dmas = <&sdma1 2 7 1>, <&sdma1 3 7 2>;
> + dma-names = "rx", "tx";
> + status = "disabled";
> + };
>
> - uart1: serial@30860000 {
> - compatible = "fsl,imx8mn-uart", "fsl,imx6q-uart";
> - reg = <0x30860000 0x10000>;
> - interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clk IMX8MN_CLK_UART1_ROOT>,
> - <&clk IMX8MN_CLK_UART1_ROOT>;
> - clock-names = "ipg", "per";
> - dmas = <&sdma1 22 4 0>, <&sdma1 23 4 0>;
> - dma-names = "rx", "tx";
> - status = "disabled";
> - };
> + ecspi3: spi@30840000 {
> + compatible = "fsl,imx8mn-ecspi", "fsl,imx51-ecspi";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0x30840000 0x10000>;
> + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clk IMX8MN_CLK_ECSPI3_ROOT>,
> + <&clk IMX8MN_CLK_ECSPI3_ROOT>;
> + clock-names = "ipg", "per";
> + dmas = <&sdma1 4 7 1>, <&sdma1 5 7 2>;
> + dma-names = "rx", "tx";
> + status = "disabled";
> + };
>
> - uart3: serial@30880000 {
> - compatible = "fsl,imx8mn-uart", "fsl,imx6q-uart";
> - reg = <0x30880000 0x10000>;
> - interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clk IMX8MN_CLK_UART3_ROOT>,
> - <&clk IMX8MN_CLK_UART3_ROOT>;
> - clock-names = "ipg", "per";
> - dmas = <&sdma1 26 4 0>, <&sdma1 27 4 0>;
> - dma-names = "rx", "tx";
> - status = "disabled";
> - };
> + uart1: serial@30860000 {
> + compatible = "fsl,imx8mn-uart", "fsl,imx6q-uart";
> + reg = <0x30860000 0x10000>;
> + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clk IMX8MN_CLK_UART1_ROOT>,
> + <&clk IMX8MN_CLK_UART1_ROOT>;
> + clock-names = "ipg", "per";
> + dmas = <&sdma1 22 4 0>, <&sdma1 23 4 0>;
> + dma-names = "rx", "tx";
> + status = "disabled";
> + };
>
> - uart2: serial@30890000 {
> - compatible = "fsl,imx8mn-uart", "fsl,imx6q-uart";
> - reg = <0x30890000 0x10000>;
> - interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
> - clocks = <&clk IMX8MN_CLK_UART2_ROOT>,
> - <&clk IMX8MN_CLK_UART2_ROOT>;
> - clock-names = "ipg", "per";
> - status = "disabled";
> + uart3: serial@30880000 {
> + compatible = "fsl,imx8mn-uart", "fsl,imx6q-uart";
> + reg = <0x30880000 0x10000>;
> + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clk IMX8MN_CLK_UART3_ROOT>,
> + <&clk IMX8MN_CLK_UART3_ROOT>;
> + clock-names = "ipg", "per";
> + dmas = <&sdma1 26 4 0>, <&sdma1 27 4 0>;
> + dma-names = "rx", "tx";
> + status = "disabled";
> + };
> +
> + uart2: serial@30890000 {
> + compatible = "fsl,imx8mn-uart", "fsl,imx6q-uart";
> + reg = <0x30890000 0x10000>;
> + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&clk IMX8MN_CLK_UART2_ROOT>,
> + <&clk IMX8MN_CLK_UART2_ROOT>;
> + clock-names = "ipg", "per";
> + status = "disabled";
> + };
> };
>
> crypto: crypto@30900000 {
> --
> 2.25.1
>
next prev parent reply other threads:[~2021-05-11 2:46 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-04-06 1:33 [PATCH 1/2] arm64: dts: imx8mn: Add spba1 bus Adam Ford
2021-04-06 1:33 ` [PATCH 2/2] arm64: dts: imx8mm: Add spba1 and spba2 buses Adam Ford
2021-05-11 2:46 ` Shawn Guo [this message]
2021-05-11 10:45 ` [PATCH 1/2] arm64: dts: imx8mn: Add spba1 bus Adam Ford
2021-05-11 12:20 ` Robin Gong
2021-05-11 14:48 ` Adam Ford
2021-05-13 2:09 ` Shawn Guo
2021-05-14 14:57 ` Robin Gong
2021-05-14 15:27 ` Adam Ford
2021-05-17 1:35 ` Robin Gong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210511024604.GE3425@dragon \
--to=shawnguo@kernel.org \
--cc=aford173@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).