devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Rob Herring <robh@kernel.org>
To: Rui Miguel Silva <rui.silva@linaro.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Sebastian Siewior <bigeasy@linutronix.de>,
	Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
	linux-usb@vger.kernel.org, devicetree@vger.kernel.org
Subject: Re: [PATCH v2 8/9] dt-bindings: usb: nxp,isp1760: add bindings
Date: Tue, 11 May 2021 14:22:13 -0500	[thread overview]
Message-ID: <20210511192213.GA2451465@robh.at.kernel.org> (raw)
In-Reply-To: <20210511085101.2081399-9-rui.silva@linaro.org>

On Tue, May 11, 2021 at 09:51:00AM +0100, Rui Miguel Silva wrote:
> The nxp,isp1760 driver is old in the tree, but did not had a bindings
> entry, since I am extend it to support isp1763 in the same family, use
> this to add a proper yaml bindings file.
> 
> Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
> ---
>  .../devicetree/bindings/usb/nxp,isp1760.yaml  | 59 +++++++++++++++++++
>  1 file changed, 59 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/usb/nxp,isp1760.yaml
> 
> diff --git a/Documentation/devicetree/bindings/usb/nxp,isp1760.yaml b/Documentation/devicetree/bindings/usb/nxp,isp1760.yaml
> new file mode 100644
> index 000000000000..0d76529e9662
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/usb/nxp,isp1760.yaml
> @@ -0,0 +1,59 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/usb/nxp,isp1760.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: NXP ISP1760 family controller bindings
> +
> +maintainers:
> +  - Sebastian Siewior <bigeasy@linutronix.de>
> +  - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
> +
> +description: |
> +  NXP ISP1760 family, which includes ISP1760/1761/1763 devicetree controller
> +  bindings
> +
> +properties:
> +  compatible:
> +    enum:
> +      - nxp,usb-isp1760
> +      - nxp,usb-isp1761
> +      - nxp,usb-isp1763
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1

In the 1761 datasheet, looks like there's a separate host and device 
irq.

> +
> +  bus-width:
> +    description:
> +      Number of data lines.
> +    enum: [8, 16, 32]
> +    default: 32
> +
> +  dr_mode:
> +    enum:
> +      - host
> +      - peripheral
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +
> +additionalProperties: true

Like what? 'true' is only correct for common collections of properties.

> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    usb@40200000 {
> +        compatible = "nxp,usb-isp1763";
> +        reg = <0x40200000 0x100000>;
> +        interrupts-parent = <&gic>;
> +        interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
> +        bus-width = <16>;
> +        dr_mode = "host";
> +    };
> +
> +...
> -- 
> 2.31.1
> 

  reply	other threads:[~2021-05-12 20:57 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-11  8:50 [PATCH v2 0/9] usb: isp1760: extend support for isp1763 Rui Miguel Silva
2021-05-11  8:50 ` [PATCH v2 1/9] usb: isp1760: fix strict typechecking Rui Miguel Silva
2021-05-11  8:50 ` [PATCH v2 2/9] usb: isp1760: move to regmap for register access Rui Miguel Silva
2021-05-11  8:50 ` [PATCH v2 3/9] usb: isp1760: use relaxed primitives Rui Miguel Silva
2021-05-11  8:50 ` [PATCH v2 4/9] usb: isp1760: remove platform data struct and code Rui Miguel Silva
2021-05-11  8:50 ` [PATCH v2 5/9] usb: isp1760: hcd: refactor mempool config and setup Rui Miguel Silva
2021-05-11  8:50 ` [PATCH v2 6/9] usb: isp1760: use dr_mode binding Rui Miguel Silva
2021-05-11  8:50 ` [PATCH v2 7/9] usb: isp1760: add support for isp1763 Rui Miguel Silva
2021-05-11  8:51 ` [PATCH v2 8/9] dt-bindings: usb: nxp,isp1760: add bindings Rui Miguel Silva
2021-05-11 19:22   ` Rob Herring [this message]
2021-05-13  8:38     ` Rui Miguel Silva
2021-05-11  8:51 ` [PATCH v2 9/9] usb: isp1763: add peripheral mode Rui Miguel Silva

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210511192213.GA2451465@robh.at.kernel.org \
    --to=robh@kernel.org \
    --cc=bigeasy@linutronix.de \
    --cc=devicetree@vger.kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-usb@vger.kernel.org \
    --cc=rui.silva@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).