From: Rui Miguel Silva <rui.silva@linaro.org>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Sebastian Siewior <bigeasy@linutronix.de>,
Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
Rob Herring <robh+dt@kernel.org>
Cc: linux-usb@vger.kernel.org, devicetree@vger.kernel.org,
Rui Miguel Silva <rui.silva@linaro.org>
Subject: [PATCH v4 8/9] dt-bindings: usb: nxp,isp1760: add bindings
Date: Thu, 13 May 2021 09:47:16 +0100 [thread overview]
Message-ID: <20210513084717.2487366-9-rui.silva@linaro.org> (raw)
In-Reply-To: <20210513084717.2487366-1-rui.silva@linaro.org>
The nxp,isp1760 driver is old in the tree, but did not had a bindings
entry, since I am extend it to support isp1763 in the same family, use
this to add a proper yaml bindings file.
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
---
.../devicetree/bindings/usb/nxp,isp1760.yaml | 69 +++++++++++++++++++
1 file changed, 69 insertions(+)
create mode 100644 Documentation/devicetree/bindings/usb/nxp,isp1760.yaml
diff --git a/Documentation/devicetree/bindings/usb/nxp,isp1760.yaml b/Documentation/devicetree/bindings/usb/nxp,isp1760.yaml
new file mode 100644
index 000000000000..a88f99adfe8e
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/nxp,isp1760.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/nxp,isp1760.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP ISP1760 family controller bindings
+
+maintainers:
+ - Sebastian Siewior <bigeasy@linutronix.de>
+ - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+
+description: |
+ NXP ISP1760 family, which includes ISP1760/1761/1763 devicetree controller
+ bindings
+
+properties:
+ compatible:
+ enum:
+ - nxp,usb-isp1760
+ - nxp,usb-isp1761
+ - nxp,usb-isp1763
+ reg:
+ maxItems: 1
+
+ interrupts:
+ minItems: 1
+ maxItems: 2
+ items:
+ - description: Host controller interrupt
+ - description: Device controller interrupt in isp1761
+
+ interrupt-names:
+ minItems: 1
+ maxItems: 2
+ items:
+ - const: host
+ - const: peripheral
+
+ bus-width:
+ description:
+ Number of data lines.
+ enum: [8, 16, 32]
+ default: 32
+
+ dr_mode:
+ enum:
+ - host
+ - peripheral
+
+required:
+ - compatible
+ - reg
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ usb@40200000 {
+ compatible = "nxp,usb-isp1763";
+ reg = <0x40200000 0x100000>;
+ interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+ bus-width = <16>;
+ dr_mode = "host";
+ };
+
+...
--
2.31.1
next prev parent reply other threads:[~2021-05-13 8:47 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-13 8:47 [PATCH v4 0/9] usb: isp1760: extend support for isp1763 Rui Miguel Silva
2021-05-13 8:47 ` [PATCH v4 1/9] usb: isp1760: fix strict typechecking Rui Miguel Silva
2021-05-13 8:47 ` [PATCH v4 2/9] usb: isp1760: move to regmap for register access Rui Miguel Silva
2021-08-20 13:30 ` Dietmar Eggemann
2021-08-20 14:36 ` Rui Miguel Silva
2021-05-13 8:47 ` [PATCH v4 3/9] usb: isp1760: use relaxed primitives Rui Miguel Silva
2021-05-13 8:47 ` [PATCH v4 4/9] usb: isp1760: remove platform data struct and code Rui Miguel Silva
2021-05-13 8:47 ` [PATCH v4 5/9] usb: isp1760: hcd: refactor mempool config and setup Rui Miguel Silva
2021-05-13 8:47 ` [PATCH v4 6/9] usb: isp1760: use dr_mode binding Rui Miguel Silva
2021-05-13 8:47 ` [PATCH v4 7/9] usb: isp1760: add support for isp1763 Rui Miguel Silva
2021-05-13 8:47 ` Rui Miguel Silva [this message]
2021-05-18 1:08 ` [PATCH v4 8/9] dt-bindings: usb: nxp,isp1760: add bindings Rob Herring
2021-05-13 8:47 ` [PATCH v4 9/9] usb: isp1763: add peripheral mode Rui Miguel Silva
2021-06-06 22:52 ` [PATCH v4 0/9] usb: isp1760: extend support for isp1763 Laurent Pinchart
2021-06-07 8:42 ` Rui Miguel Silva
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210513084717.2487366-9-rui.silva@linaro.org \
--to=rui.silva@linaro.org \
--cc=bigeasy@linutronix.de \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-usb@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).