From: Shawn Guo <shawnguo@kernel.org>
To: "Michal Vokáč" <michal.vokac@ysoft.com>
Cc: Rob Herring <robh+dt@kernel.org>,
Fabio Estevam <festevam@gmail.com>,
devicetree@vger.kernel.org, Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
NXP Linux Team <linux-imx@nxp.com>,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH RESEND] ARM: dts: imx6dl-yapp4: Configure the OLED display segment offset
Date: Sun, 23 May 2021 11:49:53 +0800 [thread overview]
Message-ID: <20210523034952.GU8194@dragon> (raw)
In-Reply-To: <1620813314-30803-1-git-send-email-michal.vokac@ysoft.com>
On Wed, May 12, 2021 at 11:55:14AM +0200, Michal Vokáč wrote:
> The imx6dl-yapp4 platform uses a GE-LX012864FWPP3N0000 OLED display.
> The display consist of a 128x64 OLED panel and a SSD1305 controller.
>
> The OLED panel resolution is 128x64 but the built-in controller default
> resolution is 132x64. To display properly a segment offset needs to be
> configured.
>
> Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com>
Why are you resending? Please state reason when you resend.
Shawn
> ---
> arch/arm/boot/dts/imx6dl-yapp4-common.dtsi | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
> index 51972c85e207..111d4d331f98 100644
> --- a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
> +++ b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
> @@ -373,6 +373,7 @@
> solomon,height = <64>;
> solomon,width = <128>;
> solomon,page-offset = <0>;
> + solomon,col-offset = <4>;
> solomon,prechargep2 = <15>;
> reset-gpios = <&gpio_oled 1 GPIO_ACTIVE_LOW>;
> vbat-supply = <&sw2_reg>;
> --
> 2.1.4
>
next prev parent reply other threads:[~2021-05-23 3:50 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-12 9:55 [PATCH RESEND] ARM: dts: imx6dl-yapp4: Configure the OLED display segment offset Michal Vokáč
2021-05-12 13:23 ` Fabio Estevam
2021-05-23 3:49 ` Shawn Guo [this message]
2021-05-24 8:59 ` Michal Vokáč
2021-06-13 8:35 ` Shawn Guo
2021-06-14 7:01 ` Michal Vokáč
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210523034952.GU8194@dragon \
--to=shawnguo@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=michal.vokac@ysoft.com \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).