devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Rex-BC Chen <rex-bc.chen@mediatek.com>
To: <chunkuang.hu@kernel.org>, <matthias.bgg@gmail.com>
Cc: <devicetree@vger.kernel.org>,
	<linux-arm-kernel@lists.infradead.org>,
	<linux-mediatek@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>,
	<Project_Global_Chrome_Upstream_Group@mediatek.com>,
	Rex-BC Chen <rex-bc.chen@mediatek.com>,
	Jitao Shi <jitao.shi@mediatek.com>
Subject: [v5,PATCH 1/3] drm/mediatek: dpi dual edge sample mode support
Date: Wed, 26 May 2021 16:52:17 +0800	[thread overview]
Message-ID: <20210526085219.7582-2-rex-bc.chen@mediatek.com> (raw)
In-Reply-To: <20210526085219.7582-1-rex-bc.chen@mediatek.com>

DPI can sample on falling, rising or both edge.
When DPI sample the data both rising and falling edge.
It can reduce half data io pins.
Use num_output_fmts to determine whether it is dual edge mode.

Signed-off-by: Jitao Shi <jitao.shi@mediatek.com>
Signed-off-by: Rex-BC Chen <rex-bc.chen@mediatek.com>
---
 drivers/gpu/drm/mediatek/mtk_dpi.c | 26 +++++++++++++++++++++++++-
 1 file changed, 25 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
index bea91c81626e..f034ebd12fa6 100644
--- a/drivers/gpu/drm/mediatek/mtk_dpi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
@@ -83,6 +83,7 @@ struct mtk_dpi {
 	struct pinctrl *pinctrl;
 	struct pinctrl_state *pins_gpio;
 	struct pinctrl_state *pins_dpi;
+	unsigned int output_fmt;
 	int refcount;
 };
 
@@ -381,6 +382,20 @@ static void mtk_dpi_config_color_format(struct mtk_dpi *dpi,
 	}
 }
 
+static void mtk_dpi_dual_edge(struct mtk_dpi *dpi)
+{
+	if ((dpi->output_fmt == MEDIA_BUS_FMT_RGB888_2X12_LE) ||
+		(dpi->output_fmt == MEDIA_BUS_FMT_RGB888_2X12_BE)) {
+		mtk_dpi_mask(dpi, DPI_DDR_SETTING, DDR_EN | DDR_4PHASE,
+			     DDR_EN | DDR_4PHASE);
+		mtk_dpi_mask(dpi, DPI_OUTPUT_SETTING,
+			     dpi->output_fmt == MEDIA_BUS_FMT_RGB888_2X12_LE ?
+			     EDGE_SEL : 0, EDGE_SEL);
+	} else {
+		mtk_dpi_mask(dpi, DPI_DDR_SETTING, DDR_EN | DDR_4PHASE, 0);
+	}
+}
+
 static void mtk_dpi_power_off(struct mtk_dpi *dpi)
 {
 	if (WARN_ON(dpi->refcount == 0))
@@ -455,7 +470,13 @@ static int mtk_dpi_set_display_mode(struct mtk_dpi *dpi,
 	pll_rate = clk_get_rate(dpi->tvd_clk);
 
 	vm.pixelclock = pll_rate / factor;
-	clk_set_rate(dpi->pixel_clk, vm.pixelclock);
+	if ((dpi->output_fmt == MEDIA_BUS_FMT_RGB888_2X12_LE) ||
+		(dpi->output_fmt == MEDIA_BUS_FMT_RGB888_2X12_BE))
+		clk_set_rate(dpi->pixel_clk, vm.pixelclock * 2);
+	else
+		clk_set_rate(dpi->pixel_clk, vm.pixelclock);
+
+
 	vm.pixelclock = clk_get_rate(dpi->pixel_clk);
 
 	dev_dbg(dpi->dev, "Got  PLL %lu Hz, pixel clock %lu Hz\n",
@@ -519,6 +540,7 @@ static int mtk_dpi_set_display_mode(struct mtk_dpi *dpi,
 	mtk_dpi_config_yc_map(dpi, dpi->yc_map);
 	mtk_dpi_config_color_format(dpi, dpi->color_format);
 	mtk_dpi_config_2n_h_fre(dpi);
+	mtk_dpi_dual_edge(dpi);
 	mtk_dpi_config_disable_edge(dpi);
 	mtk_dpi_sw_reset(dpi, false);
 
@@ -800,6 +822,8 @@ static int mtk_dpi_probe(struct platform_device *pdev)
 		return ret;
 	}
 
+	dpi->output_fmt = MEDIA_BUS_FMT_RGB888_1X24;
+
 	return 0;
 }
 
-- 
2.18.0


  reply	other threads:[~2021-05-26  8:52 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-26  8:52 [v5,PATCH 0/3] mt8183 dpi supports dual edge Rex-BC Chen
2021-05-26  8:52 ` Rex-BC Chen [this message]
2021-05-26  8:52 ` [v5,PATCH 2/3] drm/mediatek: config driver data to support dual edge sample Rex-BC Chen
2021-05-26  8:52 ` [v5,PATCH 3/3] drm/mediatek: dpi: add bus format negotiation Rex-BC Chen
2021-06-04  1:03 ` [v5,PATCH 0/3] mt8183 dpi supports dual edge Chun-Kuang Hu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210526085219.7582-2-rex-bc.chen@mediatek.com \
    --to=rex-bc.chen@mediatek.com \
    --cc=Project_Global_Chrome_Upstream_Group@mediatek.com \
    --cc=chunkuang.hu@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=jitao.shi@mediatek.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=matthias.bgg@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).