From: Johan Jonker <jbx6244@gmail.com>
To: heiko@sntech.de
Cc: robh+dt@kernel.org, kishon@ti.com, vkoul@kernel.org,
t.schramm@manjaro.org, linux-phy@lists.infradead.org,
linux-rockchip@lists.infradead.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v7 5/5] arm64: dts: rockchip: add USB support to rk3308.dtsi
Date: Tue, 1 Jun 2021 18:48:00 +0200 [thread overview]
Message-ID: <20210601164800.7670-6-jbx6244@gmail.com> (raw)
In-Reply-To: <20210601164800.7670-1-jbx6244@gmail.com>
From: Tobias Schramm <t.schramm@manjaro.org>
The Rockchip RK3308 features an integrated USB 2.0 phy, an USB OTG
controller and OHCI/EHCI interfaces.
This patch adds all of those to the RK3308 dtsi and thereby enables USB
support on the RK3308.
Signed-off-by: Tobias Schramm <t.schramm@manjaro.org>
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
---
Changed:
restyle
limit grf reg size
change sub nodename
---
arch/arm64/boot/dts/rockchip/rk3308.dtsi | 74 +++++++++++++++++++++++++++++++-
1 file changed, 73 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3308.dtsi b/arch/arm64/boot/dts/rockchip/rk3308.dtsi
index b815ce73e..a185901ab 100644
--- a/arch/arm64/boot/dts/rockchip/rk3308.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3308.dtsi
@@ -164,7 +164,7 @@
grf: grf@ff000000 {
compatible = "rockchip,rk3308-grf", "syscon", "simple-mfd";
- reg = <0x0 0xff000000 0x0 0x10000>;
+ reg = <0x0 0xff000000 0x0 0x08000>;
reboot-mode {
compatible = "syscon-reboot-mode";
@@ -177,6 +177,42 @@
};
};
+ usb2phy_grf: syscon@ff008000 {
+ compatible = "rockchip,rk3308-usb2phy-grf", "syscon", "simple-mfd";
+ reg = <0x0 0xff008000 0x0 0x4000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ u2phy: usb2phy@100 {
+ compatible = "rockchip,rk3308-usb2phy";
+ reg = <0x100 0x10>;
+ assigned-clocks = <&cru USB480M>;
+ assigned-clock-parents = <&u2phy>;
+ clocks = <&cru SCLK_USBPHY_REF>;
+ clock-names = "phyclk";
+ clock-output-names = "usb480m_phy";
+ #clock-cells = <0>;
+ status = "disabled";
+
+ u2phy_otg: otg-port {
+ interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "otg-bvalid", "otg-id",
+ "linestate";
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
+ u2phy_host: host-port {
+ interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "linestate";
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+ };
+ };
+
detect_grf: syscon@ff00b000 {
compatible = "rockchip,rk3308-detect-grf", "syscon", "simple-mfd";
reg = <0x0 0xff00b000 0x0 0x1000>;
@@ -579,6 +615,42 @@
status = "disabled";
};
+ usb20_otg: usb@ff400000 {
+ compatible = "rockchip,rk3308-usb", "rockchip,rk3066-usb",
+ "snps,dwc2";
+ reg = <0x0 0xff400000 0x0 0x40000>;
+ interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_OTG>;
+ clock-names = "otg";
+ dr_mode = "otg";
+ g-np-tx-fifo-size = <16>;
+ g-rx-fifo-size = <280>;
+ g-tx-fifo-size = <256 128 128 64 32 16>;
+ phys = <&u2phy_otg>;
+ phy-names = "usb2-phy";
+ status = "disabled";
+ };
+
+ usb_host_ehci: usb@ff440000 {
+ compatible = "generic-ehci";
+ reg = <0x0 0xff440000 0x0 0x10000>;
+ interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_HOST>, <&cru HCLK_HOST_ARB>, <&u2phy>;
+ phys = <&u2phy_host>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ usb_host_ohci: usb@ff450000 {
+ compatible = "generic-ohci";
+ reg = <0x0 0xff450000 0x0 0x10000>;
+ interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_HOST>, <&cru HCLK_HOST_ARB>, <&u2phy>;
+ phys = <&u2phy_host>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
sdmmc: mmc@ff480000 {
compatible = "rockchip,rk3308-dw-mshc", "rockchip,rk3288-dw-mshc";
reg = <0x0 0xff480000 0x0 0x4000>;
--
2.11.0
next prev parent reply other threads:[~2021-06-01 16:48 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-01 16:47 [PATCH v7 0/5] convert grf.txt to YAML Johan Jonker
2021-06-01 16:47 ` [PATCH v7 1/5] dt-bindings: phy: rename phy nodename in phy-rockchip-inno-usb2.yaml Johan Jonker
2021-06-03 5:54 ` Vinod Koul
2021-06-03 8:58 ` Heiko Stübner
2021-06-07 13:16 ` Rob Herring
2021-06-07 13:38 ` Johan Jonker
2021-06-07 14:18 ` [PATCH] dt-bindings: soc: rockchip: drop unnecessary #phy-cells from grf.yaml Heiko Stuebner
2021-06-07 15:37 ` Johan Jonker
2021-06-10 7:30 ` Heiko Stübner
2021-06-01 16:47 ` [PATCH v7 2/5] dt-bindings: soc: rockchip: grf: add compatible for RK3308 USB grf Johan Jonker
2021-06-02 18:17 ` Rob Herring
2021-06-01 16:47 ` [PATCH v7 3/5] ARM: dts: rockchip: rename nodename for phy-rockchip-inno-usb2 Johan Jonker
2021-06-01 16:47 ` [PATCH v7 4/5] arm64: " Johan Jonker
2021-06-01 16:48 ` Johan Jonker [this message]
2021-06-03 9:56 ` [PATCH v7 0/5] convert grf.txt to YAML Heiko Stuebner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210601164800.7670-6-jbx6244@gmail.com \
--to=jbx6244@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=heiko@sntech.de \
--cc=kishon@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=robh+dt@kernel.org \
--cc=t.schramm@manjaro.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).