From: Stephan Gerhold <stephan@gerhold.net>
To: Jonathan Cameron <jic23@kernel.org>
Cc: Lars-Peter Clausen <lars@metafoo.de>,
Rob Herring <robh+dt@kernel.org>,
Linus Walleij <linus.walleij@linaro.org>,
Peter Meerwald <pmeerw@pmeerw.net>,
linux-iio@vger.kernel.org, devicetree@vger.kernel.org,
Bastien Nocera <hadess@hadess.net>,
Hans de Goede <hdegoede@redhat.com>,
Andy Shevchenko <andy.shevchenko@gmail.com>,
~postmarketos/upstreaming@lists.sr.ht,
Stephan Gerhold <stephan@gerhold.net>
Subject: [PATCH v2 4/9] iio: accel: bmc150: Sort all chip names alphabetically / by chip ID
Date: Thu, 10 Jun 2021 14:21:21 +0200 [thread overview]
Message-ID: <20210610122126.50504-5-stephan@gerhold.net> (raw)
In-Reply-To: <20210610122126.50504-1-stephan@gerhold.net>
Right now all the device IDs are listed in seemingly random order,
make this consistent by ordering those alphabetically. Also, order
bmc150_accel_chip_info_tbl by chip ID for the same reason.
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
---
New patch in v2.
---
drivers/iio/accel/Kconfig | 4 +--
drivers/iio/accel/bmc150-accel-core.c | 40 +++++++++++++--------------
drivers/iio/accel/bmc150-accel-i2c.c | 26 ++++++++---------
drivers/iio/accel/bmc150-accel-spi.c | 18 ++++++------
4 files changed, 44 insertions(+), 44 deletions(-)
diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig
index 17f6bdcf1db3..883aa8bc4340 100644
--- a/drivers/iio/accel/Kconfig
+++ b/drivers/iio/accel/Kconfig
@@ -143,9 +143,9 @@ config BMC150_ACCEL
select BMC150_ACCEL_SPI if SPI
help
Say yes here to build support for the following Bosch accelerometers:
- BMC150, BMI055, BMA250E, BMA222E, BMA255, BMA280.
+ BMA222, BMA222E, BMA250E, BMA255, BMA280, BMC150, BMI055.
- This is a combo module with both accelerometer and magnetometer.
+ BMC150 is a combo module with both accelerometer and magnetometer.
This driver is only implementing accelerometer part, which has
its own address and register map.
diff --git a/drivers/iio/accel/bmc150-accel-core.c b/drivers/iio/accel/bmc150-accel-core.c
index 6fb025b4228f..1210a8b14a3c 100644
--- a/drivers/iio/accel/bmc150-accel-core.c
+++ b/drivers/iio/accel/bmc150-accel-core.c
@@ -1089,26 +1089,6 @@ static const struct iio_chan_spec bma280_accel_channels[] =
BMC150_ACCEL_CHANNELS(14);
static const struct bmc150_accel_chip_info bmc150_accel_chip_info_tbl[] = {
- {
- .name = "BMC150/BMI055/BMA255",
- .chip_id = 0xFA,
- .channels = bmc150_accel_channels,
- .num_channels = ARRAY_SIZE(bmc150_accel_channels),
- .scale_table = { {9610, BMC150_ACCEL_DEF_RANGE_2G},
- {19122, BMC150_ACCEL_DEF_RANGE_4G},
- {38344, BMC150_ACCEL_DEF_RANGE_8G},
- {76590, BMC150_ACCEL_DEF_RANGE_16G} },
- },
- {
- .name = "BMA250E",
- .chip_id = 0xF9,
- .channels = bma250e_accel_channels,
- .num_channels = ARRAY_SIZE(bma250e_accel_channels),
- .scale_table = { {38344, BMC150_ACCEL_DEF_RANGE_2G},
- {76590, BMC150_ACCEL_DEF_RANGE_4G},
- {153277, BMC150_ACCEL_DEF_RANGE_8G},
- {306457, BMC150_ACCEL_DEF_RANGE_16G} },
- },
{
.name = "BMA222",
.chip_id = 0x03,
@@ -1134,6 +1114,26 @@ static const struct bmc150_accel_chip_info bmc150_accel_chip_info_tbl[] = {
{612915, BMC150_ACCEL_DEF_RANGE_8G},
{1225831, BMC150_ACCEL_DEF_RANGE_16G} },
},
+ {
+ .name = "BMA250E",
+ .chip_id = 0xF9,
+ .channels = bma250e_accel_channels,
+ .num_channels = ARRAY_SIZE(bma250e_accel_channels),
+ .scale_table = { {38344, BMC150_ACCEL_DEF_RANGE_2G},
+ {76590, BMC150_ACCEL_DEF_RANGE_4G},
+ {153277, BMC150_ACCEL_DEF_RANGE_8G},
+ {306457, BMC150_ACCEL_DEF_RANGE_16G} },
+ },
+ {
+ .name = "BMC150/BMI055/BMA255",
+ .chip_id = 0xFA,
+ .channels = bmc150_accel_channels,
+ .num_channels = ARRAY_SIZE(bmc150_accel_channels),
+ .scale_table = { {9610, BMC150_ACCEL_DEF_RANGE_2G},
+ {19122, BMC150_ACCEL_DEF_RANGE_4G},
+ {38344, BMC150_ACCEL_DEF_RANGE_8G},
+ {76590, BMC150_ACCEL_DEF_RANGE_16G} },
+ },
{
.name = "BMA280",
.chip_id = 0xFB,
diff --git a/drivers/iio/accel/bmc150-accel-i2c.c b/drivers/iio/accel/bmc150-accel-i2c.c
index a0e2782580b7..7db436ddbdce 100644
--- a/drivers/iio/accel/bmc150-accel-i2c.c
+++ b/drivers/iio/accel/bmc150-accel-i2c.c
@@ -213,41 +213,41 @@ static int bmc150_accel_remove(struct i2c_client *client)
}
static const struct acpi_device_id bmc150_accel_acpi_match[] = {
- {"BSBA0150"},
- {"BMC150A"},
- {"BMI055A"},
{"BMA0255"},
- {"BMA250E"},
+ {"BMA0280"},
{"BMA222"},
{"BMA222E"},
- {"BMA0280"},
+ {"BMA250E"},
+ {"BMC150A"},
+ {"BMI055A"},
{"BOSC0200"},
+ {"BSBA0150"},
{"DUAL250E"},
{ },
};
MODULE_DEVICE_TABLE(acpi, bmc150_accel_acpi_match);
static const struct i2c_device_id bmc150_accel_id[] = {
- {"bmc150_accel"},
- {"bmi055_accel"},
- {"bma255"},
- {"bma250e"},
{"bma222"},
{"bma222e"},
+ {"bma250e"},
+ {"bma255"},
{"bma280"},
+ {"bmc150_accel"},
+ {"bmi055_accel"},
{}
};
MODULE_DEVICE_TABLE(i2c, bmc150_accel_id);
static const struct of_device_id bmc150_accel_of_match[] = {
- { .compatible = "bosch,bmc150_accel" },
- { .compatible = "bosch,bmi055_accel" },
- { .compatible = "bosch,bma255" },
- { .compatible = "bosch,bma250e" },
{ .compatible = "bosch,bma222" },
{ .compatible = "bosch,bma222e" },
+ { .compatible = "bosch,bma250e" },
+ { .compatible = "bosch,bma255" },
{ .compatible = "bosch,bma280" },
+ { .compatible = "bosch,bmc150_accel" },
+ { .compatible = "bosch,bmi055_accel" },
{ },
};
MODULE_DEVICE_TABLE(of, bmc150_accel_of_match);
diff --git a/drivers/iio/accel/bmc150-accel-spi.c b/drivers/iio/accel/bmc150-accel-spi.c
index 01b42fa6a015..dc884fa18ad0 100644
--- a/drivers/iio/accel/bmc150-accel-spi.c
+++ b/drivers/iio/accel/bmc150-accel-spi.c
@@ -34,26 +34,26 @@ static int bmc150_accel_remove(struct spi_device *spi)
}
static const struct acpi_device_id bmc150_accel_acpi_match[] = {
- {"BSBA0150"},
- {"BMC150A"},
- {"BMI055A"},
{"BMA0255"},
- {"BMA250E"},
+ {"BMA0280"},
{"BMA222"},
{"BMA222E"},
- {"BMA0280"},
+ {"BMA250E"},
+ {"BMC150A"},
+ {"BMI055A"},
+ {"BSBA0150"},
{ },
};
MODULE_DEVICE_TABLE(acpi, bmc150_accel_acpi_match);
static const struct spi_device_id bmc150_accel_id[] = {
- {"bmc150_accel"},
- {"bmi055_accel"},
- {"bma255"},
- {"bma250e"},
{"bma222"},
{"bma222e"},
+ {"bma250e"},
+ {"bma255"},
{"bma280"},
+ {"bmc150_accel"},
+ {"bmi055_accel"},
{}
};
MODULE_DEVICE_TABLE(spi, bmc150_accel_id);
--
2.32.0
next prev parent reply other threads:[~2021-06-10 12:24 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-10 12:21 [PATCH v2 0/9] iio: accel: bmc150: Add support for BMA253/BMA254 Stephan Gerhold
2021-06-10 12:21 ` [PATCH v2 1/9] iio: accel: bmc150: Fix bma222 scale unit Stephan Gerhold
2021-06-10 12:21 ` [PATCH v2 2/9] iio: accel: bmc150: Drop misleading/duplicate chip identifiers Stephan Gerhold
2021-06-10 12:21 ` [PATCH v2 3/9] iio: accel: bmc150: Drop duplicated documentation of supported chips Stephan Gerhold
2021-06-10 12:45 ` Andy Shevchenko
2021-06-10 12:48 ` Stephan Gerhold
2021-06-10 12:21 ` Stephan Gerhold [this message]
2021-06-10 12:50 ` [PATCH v2 4/9] iio: accel: bmc150: Sort all chip names alphabetically / by chip ID Andy Shevchenko
2021-06-10 13:00 ` Stephan Gerhold
2021-06-10 12:21 ` [PATCH v2 5/9] dt-bindings: iio: accel: bma255: Document bosch,bma253 Stephan Gerhold
2021-06-10 12:21 ` [PATCH v2 6/9] iio: accel: bmc150: Add device IDs for BMA253 Stephan Gerhold
2021-06-10 12:51 ` Andy Shevchenko
2021-06-10 13:02 ` Stephan Gerhold
2021-06-10 12:21 ` [PATCH v2 7/9] dt-bindings: iio: bma255: Allow multiple interrupts Stephan Gerhold
2021-06-10 12:21 ` [PATCH v2 8/9] dt-bindings: iio: accel: bma180/bma255: Move bma254 to bma255 schema Stephan Gerhold
2021-06-10 12:21 ` [PATCH v2 9/9] iio: accel: bma180/bmc150: Move BMA254 to bmc150-accel driver Stephan Gerhold
2021-06-10 12:54 ` Andy Shevchenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210610122126.50504-5-stephan@gerhold.net \
--to=stephan@gerhold.net \
--cc=andy.shevchenko@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=hadess@hadess.net \
--cc=hdegoede@redhat.com \
--cc=jic23@kernel.org \
--cc=lars@metafoo.de \
--cc=linus.walleij@linaro.org \
--cc=linux-iio@vger.kernel.org \
--cc=pmeerw@pmeerw.net \
--cc=robh+dt@kernel.org \
--cc=~postmarketos/upstreaming@lists.sr.ht \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).