devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
To: Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
Cc: "Stephen Boyd" <sboyd@kernel.org>,
	"Rob Herring" <robh+dt@kernel.org>,
	"Andreas Färber" <afaerber@suse.de>,
	"Michael Turquette" <mturquette@baylibre.com>,
	"Edgar Bernardi Righi" <edgar.righi@lsitec.org.br>,
	linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-actions@lists.infradead.org, linux-kernel@vger.kernel.org,
	devicetree@vger.kernel.org
Subject: Re: [PATCH v2 6/6] clk: actions: Add NIC and ETHERNET clock support for Actions S500 SoC
Date: Thu, 10 Jun 2021 20:05:54 +0530	[thread overview]
Message-ID: <20210610143554.GE315240@thinkpad> (raw)
In-Reply-To: <fb8085722305af11311ca2661cba2bf73a71abea.1622119892.git.cristian.ciocaltea@gmail.com>

On Thu, May 27, 2021 at 04:16:44PM +0300, Cristian Ciocaltea wrote:
> Add support for the missing NIC and ETHERNET clocks in the Actions Semi
> Owl S500 SoC clock driver.
> 
> Additionally, change APB clock parent from AHB to the newly added NIC.
> 
> Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com>

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

Thanks,
Mani

> ---
> Changes in v2:
>  - Reordered "nic_clk_mux_p" after "ahbprediv_clk_mux_p" to follow the reg
>    field ordering
> 
>  drivers/clk/actions/owl-s500.c | 17 ++++++++++++++++-
>  1 file changed, 16 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/clk/actions/owl-s500.c b/drivers/clk/actions/owl-s500.c
> index 257923bd5386..a9c7e06ebcd6 100644
> --- a/drivers/clk/actions/owl-s500.c
> +++ b/drivers/clk/actions/owl-s500.c
> @@ -113,6 +113,7 @@ static const char * const sensor_clk_mux_p[] = { "hosc", "bisp_clk" };
>  static const char * const sd_clk_mux_p[] = { "dev_clk", "nand_pll_clk" };
>  static const char * const pwm_clk_mux_p[] = { "losc", "hosc" };
>  static const char * const ahbprediv_clk_mux_p[] = { "dev_clk", "display_pll_clk", "nand_pll_clk", "ddr_pll_clk" };
> +static const char * const nic_clk_mux_p[] = { "dev_clk", "display_pll_clk", "nand_pll_clk", "ddr_pll_clk" };
>  static const char * const uart_clk_mux_p[] = { "hosc", "dev_pll_clk" };
>  static const char * const de_clk_mux_p[] = { "display_pll_clk", "dev_clk" };
>  static const char * const i2s_clk_mux_p[] = { "audio_pll_clk" };
> @@ -194,7 +195,7 @@ static OWL_GATE(hdmi_clk, "hdmi_clk", "hosc", CMU_DEVCLKEN1, 3, 0, 0);
>  
>  /* divider clocks */
>  static OWL_DIVIDER(h_clk, "h_clk", "ahbprediv_clk", CMU_BUSCLK1, 2, 2, NULL, 0, 0);
> -static OWL_DIVIDER(apb_clk, "apb_clk", "ahb_clk", CMU_BUSCLK1, 14, 2, NULL, 0, 0);
> +static OWL_DIVIDER(apb_clk, "apb_clk", "nic_clk", CMU_BUSCLK1, 14, 2, NULL, 0, 0);
>  static OWL_DIVIDER(rmii_ref_clk, "rmii_ref_clk", "ethernet_pll_clk", CMU_ETHERNETPLL, 1, 1, rmii_ref_div_table, 0, 0);
>  
>  /* factor clocks */
> @@ -202,6 +203,12 @@ static OWL_FACTOR(de1_clk, "de_clk1", "de_clk", CMU_DECLK, 0, 4, de_factor_table
>  static OWL_FACTOR(de2_clk, "de_clk2", "de_clk", CMU_DECLK, 4, 4, de_factor_table, 0, 0);
>  
>  /* composite clocks */
> +static OWL_COMP_DIV(nic_clk, "nic_clk", nic_clk_mux_p,
> +			OWL_MUX_HW(CMU_BUSCLK1, 4, 3),
> +			{ 0 },
> +			OWL_DIVIDER_HW(CMU_BUSCLK1, 16, 2, 0, NULL),
> +			0);
> +
>  static OWL_COMP_DIV(ahbprediv_clk, "ahbprediv_clk", ahbprediv_clk_mux_p,
>  			OWL_MUX_HW(CMU_BUSCLK1, 8, 3),
>  			{ 0 },
> @@ -317,6 +324,10 @@ static OWL_COMP_FIXED_FACTOR(i2c3_clk, "i2c3_clk", "ethernet_pll_clk",
>  			OWL_GATE_HW(CMU_DEVCLKEN1, 31, 0),
>  			1, 5, 0);
>  
> +static OWL_COMP_FIXED_FACTOR(ethernet_clk, "ethernet_clk", "ethernet_pll_clk",
> +			OWL_GATE_HW(CMU_DEVCLKEN1, 22, 0),
> +			1, 20, 0);
> +
>  static OWL_COMP_DIV(uart0_clk, "uart0_clk", uart_clk_mux_p,
>  			OWL_MUX_HW(CMU_UART0CLK, 16, 1),
>  			OWL_GATE_HW(CMU_DEVCLKEN1, 6, 0),
> @@ -451,6 +462,8 @@ static struct owl_clk_common *s500_clks[] = {
>  	&apb_clk.common,
>  	&dmac_clk.common,
>  	&gpio_clk.common,
> +	&nic_clk.common,
> +	&ethernet_clk.common,
>  };
>  
>  static struct clk_hw_onecell_data s500_hw_clks = {
> @@ -510,6 +523,8 @@ static struct clk_hw_onecell_data s500_hw_clks = {
>  		[CLK_APB]		= &apb_clk.common.hw,
>  		[CLK_DMAC]		= &dmac_clk.common.hw,
>  		[CLK_GPIO]		= &gpio_clk.common.hw,
> +		[CLK_NIC]		= &nic_clk.common.hw,
> +		[CLK_ETHERNET]		= &ethernet_clk.common.hw,
>  	},
>  	.num = CLK_NR_CLKS,
>  };
> -- 
> 2.31.1
> 

      reply	other threads:[~2021-06-10 14:37 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-27 13:16 [PATCH v2 0/6] Improve clock support for Actions S500 SoC Cristian Ciocaltea
2021-05-27 13:16 ` [PATCH v2 1/6] clk: actions: Fix UART clock dividers on Owl " Cristian Ciocaltea
2021-05-27 13:16 ` [PATCH v2 2/6] clk: actions: Fix SD clocks factor table " Cristian Ciocaltea
2021-06-10 14:29   ` Manivannan Sadhasivam
2021-05-27 13:16 ` [PATCH v2 3/6] clk: actions: Fix bisp_factor_table based clocks " Cristian Ciocaltea
2021-06-10 14:32   ` Manivannan Sadhasivam
2021-05-27 13:16 ` [PATCH v2 4/6] clk: actions: Fix AHPPREDIV-H-AHB clock chain " Cristian Ciocaltea
2021-06-10 14:34   ` Manivannan Sadhasivam
2021-06-10 20:10     ` Cristian Ciocaltea
2021-05-27 13:16 ` [PATCH v2 5/6] dt-bindings: clock: Add NIC and ETHERNET bindings for Actions " Cristian Ciocaltea
2021-06-10 14:34   ` Manivannan Sadhasivam
2021-05-27 13:16 ` [PATCH v2 6/6] clk: actions: Add NIC and ETHERNET clock support " Cristian Ciocaltea
2021-06-10 14:35   ` Manivannan Sadhasivam [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210610143554.GE315240@thinkpad \
    --to=manivannan.sadhasivam@linaro.org \
    --cc=afaerber@suse.de \
    --cc=cristian.ciocaltea@gmail.com \
    --cc=devicetree@vger.kernel.org \
    --cc=edgar.righi@lsitec.org.br \
    --cc=linux-actions@lists.infradead.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mturquette@baylibre.com \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).