From: Manivannan Sadhasivam <mani@kernel.org>
To: Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
Cc: "Rob Herring" <robh+dt@kernel.org>,
"Andreas Färber" <afaerber@suse.de>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-actions@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 2/2] ARM: dts: owl-s500-roseapplepi: Add ethernet support
Date: Mon, 14 Jun 2021 16:57:33 +0530 [thread overview]
Message-ID: <20210614112733.GA38584@thinkpad> (raw)
In-Reply-To: <d0e1fbf81984127f0352eb740c7129424b5e40f9.1623401998.git.cristian.ciocaltea@gmail.com>
On Fri, Jun 11, 2021 at 12:11:33PM +0300, Cristian Ciocaltea wrote:
> Add pinctrl configuration for enabling the Ethernet MAC on RoseapplePi
> SBC. Additionally, provide the necessary properties for the generic S500
> ethernet node in order to setup PHY and MDIO.
>
> Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Thanks,
Mani
> ---
> arch/arm/boot/dts/owl-s500-roseapplepi.dts | 45 ++++++++++++++++++++++
> 1 file changed, 45 insertions(+)
>
> diff --git a/arch/arm/boot/dts/owl-s500-roseapplepi.dts b/arch/arm/boot/dts/owl-s500-roseapplepi.dts
> index b8c5db2344aa..eb555f385283 100644
> --- a/arch/arm/boot/dts/owl-s500-roseapplepi.dts
> +++ b/arch/arm/boot/dts/owl-s500-roseapplepi.dts
> @@ -225,6 +225,27 @@ bias1-pinconf {
> bias-pull-down;
> };
> };
> +
> + ethernet_pins: ethernet-pins {
> + eth_rmii-pinmux {
> + groups = "rmii_txd0_mfp", "rmii_txd1_mfp",
> + "rmii_rxd0_mfp", "rmii_rxd1_mfp",
> + "rmii_txen_mfp", "rmii_rxen_mfp",
> + "rmii_crs_dv_mfp", "rmii_ref_clk_mfp";
> + function = "eth_rmii";
> + };
> +
> + phy_clk-pinmux {
> + groups = "clko_25m_mfp";
> + function = "clko_25m";
> + };
> +
> + ref_clk-pinconf {
> + groups = "rmii_ref_clk_drv";
> + drive-strength = <2>;
> + };
> +
> + };
> };
>
> /* uSD */
> @@ -241,6 +262,30 @@ &mmc0 {
> vqmmc-supply = <&sd_vcc>;
> };
>
> +ðernet {
> + pinctrl-names = "default";
> + pinctrl-0 = <ðernet_pins>;
> + phy-mode = "rmii";
> + phy-handle = <ð_phy>;
> + status = "okay";
> +
> + mdio {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + reset-gpios = <&pinctrl 88 GPIO_ACTIVE_LOW>; /* GPIOC24 */
> + reset-delay-us = <10000>;
> + reset-post-delay-us = <150000>;
> +
> + eth_phy: ethernet-phy@3 {
> + reg = <0x3>;
> + max-speed = <100>;
> + interrupt-parent = <&sirq>;
> + interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
> + };
> + };
> +};
> +
> &twd_timer {
> status = "okay";
> };
> --
> 2.32.0
>
next prev parent reply other threads:[~2021-06-14 11:29 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-11 9:11 [PATCH v2 0/2] Add Ethernet DTS for Actions Semi Owl S500 SoCs Cristian Ciocaltea
2021-06-11 9:11 ` [PATCH v2 1/2] ARM: dts: owl-s500: Add ethernet support Cristian Ciocaltea
2021-06-16 13:30 ` kernel test robot
2021-06-28 6:22 ` Manivannan Sadhasivam
2021-06-28 7:02 ` Cristian Ciocaltea
2021-06-28 7:31 ` Manivannan Sadhasivam
2021-06-11 9:11 ` [PATCH v2 2/2] ARM: dts: owl-s500-roseapplepi: " Cristian Ciocaltea
2021-06-14 11:27 ` Manivannan Sadhasivam [this message]
2021-06-14 11:28 ` [PATCH v2 0/2] Add Ethernet DTS for Actions Semi Owl S500 SoCs Manivannan Sadhasivam
2021-06-14 12:11 ` Cristian Ciocaltea
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210614112733.GA38584@thinkpad \
--to=mani@kernel.org \
--cc=afaerber@suse.de \
--cc=cristian.ciocaltea@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-actions@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).