Re: [PATCH 2/9] dt-bindings: media: Document Synopsys DesignWare HDMI RX

[Rob Herring <robh@kernel.org>]

On Wed, Jun 02, 2021 at 01:24:20PM +0200, Nelson Costa wrote:
> Document the device tree bindings for the Synopsys DesignWare HDMI RX
> Controller.
> 
> Signed-off-by: Jose Abreu <jose.abreu@synopsys.com>
> Signed-off-by: Nelson Costa <nelson.costa@synopsys.com>
> ---
>  .../devicetree/bindings/media/snps,dw-hdmi-rx.yaml | 98 ++++++++++++++++++++++
>  1 file changed, 98 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/media/snps,dw-hdmi-rx.yaml
> 
> diff --git a/Documentation/devicetree/bindings/media/snps,dw-hdmi-rx.yaml b/Documentation/devicetree/bindings/media/snps,dw-hdmi-rx.yaml
> new file mode 100644
> index 0000000..4f2169e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/media/snps,dw-hdmi-rx.yaml
> @@ -0,0 +1,98 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/media/snps,dw-hdmi-rx.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Synopsys DesignWare HDMI RX Controller Device Tree Bindings
> +
> +maintainers:
> +  - Jose Abreu <jose.abreu@synopsys.com>
> +  - Nelson Costa <nelson.costa@synopsys.com>
> +
> +description: |
> +  The Synopsys DesignWare HDMI RX Controller and PHYs e405/e406 is an HDMI 2.0
> +  Receiver solution that is able to decode video and audio.
> +
> +properties:
> +  compatible:
> +    const: snps,dw-hdmi-rx
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  clocks:
> +    maxItems: 1
> +    description: |
> +      phandle to the configuration clock
> +
> +  clock-names:
> +    const: cfg
> +
> +  phys:
> +    maxItems: 1
> +    description: |
> +      phandle for the HDMI RX PHY
> +
> +  phy-names:
> +    const: hdmi-phy

You don't need *-names when there is only one generally.

> +
> +  port:
> +    $ref: /schemas/graph.yaml#/properties/port
> +    description: |
> +      Input port node, multiple endpoints describing the HDMI RX data connected
> +      to the HDMI PHY receiver.
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - clocks
> +  - clock-names
> +  - phys
> +  - phy-names
> +  - port
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    hdmi_rx: hdmi-rx@0 {
> +        compatible = "snps,dw-hdmi-rx";
> +        reg = <0x0 0x10000>;
> +        interrupts = <1 2>;
> +
> +        clocks = <&dw_hdmi_refclk>;
> +        clock-names = "cfg";
> +
> +        phys = <&hdmi_e406_phy>;
> +        phy-names = "hdmi-phy";
> +
> +        port {
> +            #address-cells = <1>;
> +            #size-cells = <0>;
> +
> +            hdmi_rx_0: endpoint@0 {
> +                reg = <0>;
> +                remote-endpoint = <&hdmi_e406_phy_0>;
> +            };

I don't get why you have a connection to the phy with 'phys' and OF 
graph? The connection should be to the remote device generating the HDMI 
data with a PHY being somewhat transparent to that data flow.

> +
> +            hdmi_rx_1: endpoint@1 {
> +                reg = <1>;
> +                remote-endpoint = <&hdmi_e406_phy_1>;
> +            };
> +
> +            hdmi_rx_2: endpoint@2 {
> +                reg = <2>;
> +                remote-endpoint = <&hdmi_e406_phy_2>;
> +            };
> +
> +            hdmi_rx_3: endpoint@3 {
> +                reg = <3>;
> +                remote-endpoint = <&hdmi_e406_phy_3>;
> +            };
> +        };
> +    };
> -- 
> 2.7.4